STRAP TYPE PPTC FLT Series RoHS ü FEATURES AGENCY RECOGNITION •Low profile, Solid state •Application: Rechargeable battery packs, Lithium cell and battery packs •Operation Current: 0.7A ~3.4A •Maximum Voltage: 24V •Temperature Range: -40°C to 85°C •UL (E211981) •C-UL (E211981) •TÜV (R3-50004084) ELECTRICAL CHARACTERISTIC (23°C) Part Number Hold Current Trip Current Maximum time to trip Maximum Current Rated Voltage Typical Power RMIN Resistance Tolerance RMAX R1MAX IH, A IT, A at 5xIH, sec IMAX, A VMAX, Vdc Pd, W OHMS OHMS OHMS FLT070F 0.7 1.5 5.0 100 24 1.1 0.100 0.200 0.340 FLT100F 1.00 2.5 7.0 100 24 1.5 0.070 0.130 0.260 FLT180F 1.8 3.8 2.9 100 24 2.0 0.040 0.068 0.120 FLT190F 1.9 4.2 3.0 100 24 1.9 0.030 0.057 0.100 FLT260F 2.6 5.2 5.0 100 24 2.3 0.025 0.042 0.076 FLT300F 3.0 6.3 4.0 100 24 2.0 0.015 0.031 0.055 FLT310F 3.1 6.0 4.0 100 24 2.5 0.018 0.030 0.055 FLT340F 3.4 6.8 5.0 100 24 2.7 0.016 0.027 0.050 IH=Hold current-maximum current at which the device will not trip at 23°C still air. IT=Trip current-maximum current at which the device will always trip at 23°C still air. V MAX=Maximum voltage device can withstand without damage at its rated current. I MAX=Maximum fault current device can withstand without damage at rated voltage (V MAX). Pd=Typical power dissipated from device when in the tripped state in 23°C still air environment. R MIN=Minimum device resistance at 23°C. R1MAX=Maximum device resistance at 23°C, 1 hour after tripping. Physical specifications: Lead materials: 0.13mm nominal thickness, quarter-hard nickel. Insulating material: Polyester tape. FLT PRODUCT DIMENSIONS (MILLIMETERS) Part Number Fig A Min B C D F Max Min Max Min Max Min Max Min Max FLT070F 1 19.9 22.1 4.9 5.2 0.7 1.2 5.5 7.5 3.9 4.1 FLT100F 1 20.9 23.1 4.9 5.2 0.6 1.0 4.1 5.5 3.9 4.1 FLT180F 1 24.0 26.0 4.9 5.2 0.6 1.0 4.1 5.5 3.9 4.1 FLT190F 1 21.3 23.4 10.2 11.0 0.5 1.1 5.0 7.6 4.8 5.4 FLT260F 1 24.0 26.0 10.8 11.9 0.6 1.0 5.0 7.0 5.9 6.1 FLT300F 1 28.4 31.8 13.0 13.5 0.5 1.1 6.3 8.9 6 6.6 FLT310F 1 24.0 26.0 14.8 15.9 0.6 1.0 5.0 7.0 5.9 6.1 FLT340F 1 24.0 26.0 14.8 15.9 0.6 1.0 4.0 5.0 5.9 6.1 THERMAL DERATING CURVE TYPICAL TIME-TO-TRIP AT 23°C A B C D E FG H 10 150% Time-to-trip (S) Percent of Rated Hold and Trip Current Thermal Derating Curve - FLT Serie s 200% 100% 1 50% 0.1 0% -40 -20 0 20 40 60 80 Ambient Temperature (C) 1 10 100 A B C D E F G H = = = = = = = = FLT070 FLT100 FLT180 FLT190 FLT260 FLT300 FLT310 FLT340 Fault Current (A) NOTE: All specification subject to change without notice. RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5EC02 REV 2007.03.1