POLYFUSE® RESETTABLE FUSES SMD0603 SMD Type, 6 V / 9 V / 15 V Specifications Standard Packaging A Materials Terminals: UL 1434 1st Edition CSA C22.2 No. 0 CSA TIL No. CA-3A Approvals TÜV pending cURus pending Features lead free This product line is the smallest available SMD resettable fuse. These devices offer wide range in hold currents. The SMD0603 product line is suitable for high density circuit board applications in computers, handheld equipment and general electronics. Suitable for reflow soldering. Pad Layout (mm) Dimensions (mm) Model SMD0603P010TF SMD0603P020TF SMD0603P025TF SMD0603P035TF SMD0603P050TF P E R I M 1.0 1.0 1.0 A Min Max B Min Max C Min Max D Min E Min Max 1.40 1.40 1.40 1.40 1.40 0.60 0.60 0.70 0.70 0.60 0.40 0.40 0.40 0.75 0.75 0.15 0.15 0.15 0.15 0.15 0.10 0.10 0.10 0.10 0.10 1.80 1.80 1.75 1.75 1.80 1.00 1.00 1.00 1.00 1.00 Y R Solvent Resistance MIL-STD-202, Method 215, no change 0.80 I L Solder-plated copper Max. Device Surface Temperature in Tripped State 125 °C Operating / Storage Temperature -40 ºC to +85 ºC (consider derating) Humidity Ageing +85 °C, 85 % R.H., 1000 hours, ± 5 % typical resistance change Vibration MIL-STD-883C, Method 2007.1, Condition A, no change Thermal Shock MIL-STD-202F, Method 107G +85 °C to -40 °C 20 times, -30 % typical resistance change Lead Solderability Meets EIA Specification RS186-9E, ANSI/J-STD-002, Category 3 Reflow only A N Dimensions (mm) Blistertape and reel Ø 178 mm 0.75 0.75 0.75 1.55 1.55 packaging quantity tape 0.40 0.40 0.40 0.40 0.40 t.b.d. Permissible continuous operating current is ≤ 100 % at ambient temperature of 20 ºC (68 ºF). Model Ihold (A) ITrip (A) Vmax. dc (V) Imax. (A) max. time to trip (s @ A) Pd max. (W) SMD0603PO10TF SMD0603PO20TF SMD0603P025TF SMD0603PO35TF SMD0603P050TF 0.10 0.20 0.25 0.35 0.50 0.30 0.50 0.55 0.70 1.00 15 9 9 6 6 40 40 40 40 40 [email protected] [email protected] [email protected] [email protected] [email protected] 0.5 0.5 0.5 0.5 0.5 NOTE: I hold = I trip = Vmax = I max = Hold current: maximum current device will pass without tripping in 20°C still air. Trip current: minimum current at which the device will trip in 20°C still air. Maximum voltage device can withstand without damage at rated current (I max) Maximum fault current device can withstand without damage at rated voltage (Vmax) Order Information 040606 Qty. OrderNumber Model Resistance R min.(Ω) RI max.(Ω) 0.900 0.550 0.500 0.200 0.100 6.000 3.500 3.000 1.000 0.680 Approvals p p p p p Pd = Power dissipated from device when in the tripped state at 20 °C still air. Minimum resistance of device in initial (un-soldered) state. R min= R 1max= Maximum resistance of device at 20 °C measured one hour after tripping for 20 s. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. Specifications are subject to change without notice Packaging In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. www.littelfuse.com