PBPC601 - PBPC607 6.0A BRIDGE RECTIFIER Features · · · · · · High Current Capability Surge Overload Rating to 125A Peak High Case Dielectric Strength of 1500V Ideal for Printed Circuit Board Application Plastic Material: UL Flammability Classification Rating 94V-0 UL Listed: Recognized Component Index, File Number E94661 H G · · · · · PBPC-3 AC A - AC E Mechanical Data · · + D Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Marked on Body Mounting: Through Hole for #6 Screw Mounting Torque: 5.0 Inch-pounds Maximum Weight: 3.8 grams (approx) Marking: Type Number C Dim Min Max A 14.73 15.75 B 5.84 6.86 C 19.00 ¾ D 0.76Æ Typical E 1.70 G H B 3.20 Hole for #6 screw 3.60Æ 4.00Æ 10.30 11.30 All Dimensions in mm A Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TC = 50°C (Note 2) @ TC = 50°C Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage (per element) @ IF = 3.0A Symbol PBPC 601 PBPC 602 PBPC 603 PBPC 604 PBPC 605 PBPC 606 PBPC 607 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 6.0 4.0 A IFSM 125 A VFM 1.1 V Peak Reverse Current @TC = 25°C at Rated DC Blocking Voltage (per element)@ TC = 100°C IR 10 1.0 mA mA I2t Rating for Fusing (t < 8.3ms) (Note 3) I2t 64 A2s Typical Junction Capacitance (Note 4) Typical Thermal Resistance Junction to Case (per element) Operating and Storage Temperature Range Notes: Cj 55 pF RqJC 12.5 °C/W Tj, TSTG -65 to +125 °C 1. Mounted on metal chassis. 2. Mounted on PC board FR-4 material. 3. Non-repetitive, for t > 1.0ms and < 8.3ms. 4. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. DS21322 Rev. D-2 1 of 2 PBPC601-PBPC607 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVG RECTIFIED OUTPUT CURRENT (A) 10 Resistive or Inductive Load 8 6 Mounted on Metal Chassis 4 Mounted on PC Board 2 0 0 50 100 100 Pulse width = 300µs Tj = 25°C 10 1.0 0.1 0.01 0.6 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 8.3ms Single half-sine-wave TJ = 125°C 100 75 50 25 0 1 10 100 1.2 1.4 1.6 1.8 2.0 10 Tj = 100°C 1.0 0.1 Tj = 25°C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current DS21322 Rev. D-2 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM, PEAK FWD SURGE CURRENT (A) 125 0.8 2 of 2 PBPC601-PBPC607