PBPC601 - PBPC607 6.0A BRIDGE RECTIFIER Features · · · · · High Current Capability Surge Overload Rating to 125A Peak High Case Dielectric Strength of 1500V Ideal for Printed Circuit Board Application H UL Listed: Recognized Component Index, File Number E94661 + G A Mechanical Data · · · · · · · · · · PBPC-6 AC E Case: PBPC-6 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 - AC D Dim Min Max A 14.73 15.75 B 5.84 6.86 C 19.00 ¾ D 1.01Æ Typical E 1.70 Moisture Sensitivity: Level 1 per J-STD-020C G Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 B Polarity: Marked on Body Mounting: Through Hole for #6 Screw H 3.60Æ 4.00Æ 10.30 11.30 All Dimensions in mm A Mounting Torque: 5.0 Inch-pounds Maximum 3.20 Hole for #6 screw C Ordering Information: See Last Page Marking: Type Number Weight: 3.8 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TC = 50°C (Note 2) @ TC = 50°C Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Forward Voltage (per element) @ IF = 3.0A Symbol PBPC 601 PBPC 602 PBPC 603 PBPC 604 PBPC 605 PBPC 606 PBPC 607 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 6.0 4.0 A IFSM 125 A VFM 1.1 V Peak Reverse Current @ TC = 25°C at Rated DC Blocking Voltage (per element) @ TC = 100°C IR 10 1.0 mA mA I2t Rating for Fusing (t < 8.3ms) (Note 3) I2 t 64 A2 s Typical Total Capacitance (Note 4) Typical Thermal Resistance Junction to Case (per element) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. CT 55 pF RqJC 12.5 °C/W Tj, TSTG -65 to +125 °C Mounted on metal chassis. Mounted on PC board FR-4 material. Non-repetitive, for t > 1.0ms and < 8.3ms. Per element, measured at f = 1.0MHz and applied reverse voltage of VR = 4.0V DC. DS21322 Rev. 7 - 2 1 of 2 www.diodes.com PBPC601-PBPC607 ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED OUTPUT CURRENT (A) 10 Resistive or Inductive Load 8 6 Mounted on Metal Chassis 4 Mounted on PC Board 2 0 0 50 100 100 10 1.0 0.1 0.01 0.6 150 IFSM, PEAK FORWARD SURGE CURRENT (A) 1.0 1.2 1.4 1.6 1.8 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 10 125 8.3ms Single half-sine-wave TJ = 125°C 100 Tj = 100°C 1.0 75 50 0.1 25 Tj = 25°C 0.01 0 1 10 0 100 Ordering Information 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current Notes: 0.8 (Note 5) Device Packaging Shipping PBPC601 PBPC-6 200/Box PBPC602 PBPC-6 200/Box PBPC603 PBPC-6 200/Box PBPC604 PBPC-6 200/Box PBPC605 PBPC-6 200/Box PBPC606 PBPC-6 200/Box PBPC607 PBPC-6 200/Box 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21322 Rev. 7 - 2 2 of 2 www.diodes.com PBPC601-PBPC607