STEALTH II Rectifier FFP30S60S tm Features 30A, 600V STEALTHTM II Rectifier • High Speed Switching, trr < 40ns @ IF = 30A The FFP30S60S is STEALTHTM II rectifier with soft recovery charac-teristics. It is silicon nitride passivated ion-implanted epitaxial planar construction. • High Reverse Voltage and High Reliability This device is intended for use as freewheeling of boost diode in switching power supplies and other power swithching applications. Their low stored charge and hyperfast soft recovery minimize ringing and electrical noise in many power switching circuits reducing power loss in the switching transistors. • RoHS compliant Applications • General Purpose • Switching Mode Power Supply • Boost Diode in continuous mode power factor corrections • Power switching circuits Pin Assigments TO-220-2L 1. Cathode 1. Cathode 2. Anode 2. Anode Absolute Maximum Ratings TC = 25oC unless otherwise noted Symbol VRRM Peak Repetitive Reverse Voltage VRWM VR IF(AV) Average Rectified Forward Current IFSM Non-repetitive Peak Surge Current 60Hz Single Half-Sine Wave TJ, TSTG Parameter Ratings 600 Units V Working Peak Reverse Voltage 600 V DC Blocking Voltage 600 V 30 A @ TC = 103oC 300 Operating and Storage Temperature Range A o -65 to +150 C Thermal Characteristics Symbol RθJC Parameter Ratings Maximum Thermal Resistance, Junction to Case Units o 1.1 C/W Package Marking and Ordering Information Device Marking Device Package Reel Size Tape Width Quantity F30S60S FFP30S60STU TO-220-2L - - 50 ©2007 Fairchild Semiconductor Corporation FFP30S60S Rev. A 1 www.fairchildsemi.com FFP30S60S October 2007 TM Symbol Min. Typ. Max. Units VFM1 IF = 30A IF = 30A Parameter TC = 25oC TC = 125oC - 2.1 1.6 2.6 - V IRM1 VR = 600V VR = 600V TC = 25oC TC = 125oC - - 100 500 µA trr IF = 1A, di/dt = 100A/µs, VR = 30V TC = 25oC - 25 35 ns - 28 2.4 0.9 34 40 - ns A - 75 6.3 0.9 236 - nC 20 - - mJ trr Irr S factor Qrr IF = 30A, di/dt = 200A/µs, VR = 390V trr Irr S factor Qrr IF = 30A, di/dt = 200A/µs, VR = 390V WAVL Avalanche Energy ( L = 40mH) o TC = 25 C TC = 125oC nC ns A Notes: 1: Pulse: Test Pulse width = 300µs, Duty Cycle = 2% Test Circuit and Waveforms FFP30S60S Rev. A 2 www.fairchildsemi.com FFP30S60S Electrical Characteristics TC = 25oC unless otherwise noted FFP30S60S Typical Performance Characteristics Figure 1. Typical Forward Voltage Drop vs. Forward Current Figure 2. Typical Reverse Current vs. Reverse Voltage 1000 200 o o TC = 125 C o 75 C o 25 C 10 0 1 o TC = 25 C 0.1 1 2 3 4 Forward Voltage, VF [V] 10 5 Figure 3. Typical Junction Capacitance Reverse Recovery Time, trr [ns] 280 210 140 70 1 10 Reverse Voltage, VR [V] 600 o o TC = 75 C 60 o TC = 25 C 40 20 100 150 200 di/dt [A/µs] 250 300 Figure 6. Forward Current Derating Curve 70 8 Average Forward Current, IF(AV) [A] 10 o TC = 125 C 6 o TC = 75 C 4 o TC = 25 C 2 FFP30S60S Rev. A 500 TC = 125 C 80 100 Figure 5. Typical Reverse Recovery Current vs. di/dt 0 100 200 300 400 Reverse Voltage, VR [V] 100 Typical Capacitance at 0V = 271 pF 0 0.1 100 Figure 4. Typical Reverse Recovery Time vs. di/dt 350 Capacitances , Cj [pF] o TC = 75 C 10 0.01 1 Reverse Recovery Current, Irr [A] TC = 125 C 100 Reverse Current , IR [µA] Forward Current, IF [A] 100 150 200 di/dt [A/µs] 250 60 50 40 30 20 10 0 25 300 3 50 75 100 125 o Case temperature, TC [ C] 150 www.fairchildsemi.com FFP30S60S Mechanical Dimensions TO-220-2L Dimensions in Millimeters FFP30S60S Rev. A 4 www.fairchildsemi.com FFP30S60S TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM ® PDP-SPM™ Power220® SuperSOT™-8 SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition tm Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I31 FFP30S60S Rev. A 5 www.fairchildsemi.com