SSOA - SSOM SURFACE MOUNT SUPER FAST RECTIFIERS PRV : 50 - 1000 Volts Io : 1.5 Amperes SMA (DO-214AC) High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Super fast recovery time 0.2 ± 0.07 1.2 ± 0.2 2.1 ± 0.2 2.6 ± 0.15 MECHANICAL DATA : * * * * * * 1.1 ± 0.3 4.5 ± 0.15 * * * * * * 5.0 ± 0.15 FEATURES : 2.0 ± 0.2 Case : SMA Molded plastic Epoxy : UL94V-O rate flame retardant Lead : Lead Formed for Surface Mount Polarity : Color band denotes cathode end Mounting position : Any Weight : 0.064 gram Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 ° C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL SSOA SSOB SSOC SSOD SSOE SSOG SSOJ SSOK SSOM UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 105 140 210 280 420 560 700 Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 600 800 1000 Volts Maximum Average Forward Current Ta = 55 °C IF(AV) 1.5 Amps. IFSM 60 Amps. Volts Peak Forward Surge Current 8.3 ms. Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Peak Forward Voltage at IF = 1.5 A. VF 0.95 1.4 1.7 Volts Maximum DC Reverse Current Ta = 25 °C IR 5 µA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 50 µA Maximum Reverse Recovery Time ( Note 1 ) Trr 35 ns Typical Junction Capacitance ( Note 2 ) CJ 50 pf Junction Temperature Range TJ - 65 to + 150 °C Storage Temperature Range TSTG - 65 to + 150 °C Notes : ( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. ( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC UPDATE : JULY 25, 1998 RATING AND CHARACTERISTIC CURVES ( SSOA - SSOM ) FIG.1 - REVERSE RECOVERY TIM E CHARACTERISTIC AND TEST CIRCUIT DIAGRAM Trr 10 Ω 50 Ω + 0.5 A + D.U.T. 0 PULSE GENERATOR ( NOTE 2 ) 50 Vdc (approx) 1Ω - 0.25 OSCILLOSCOPE ( NOTE 1 ) - 1.0 A SET TIME BASE FOR 15 ns/cm NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF. 1 cm 2. Rise time = 10 ns max., Source Impedance = 50 ohms. 3. All Resistors = Non-inductive Types. FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 75 1.5 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.2 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 1.2 0.9 0.6 0.3 8.3 ms SINGLE HALF SINE WAVE Ta = 50 °C 60 45 30 15 60Hz RESISTIVE OR INDUCTIVE LOAD 0 0 25 50 75 100 125 150 0 175 1 2 AMBIENT TEMPERATURE, ( °C) 10 20 40 60 100 FIG.5 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MICROAMPERES 100 FORWARD CURRENT, AMPERES 6 NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS Pulse Width = 300µs 2% Duty Cycle TJ = 25 °C 10 SSOE - SSOG SSOA - SSOD 4 1.0 SSOJ - SSOM 0.1 10 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE, VOLTS 1.8 2.0 140