FUJITSU SEMICONDUCTOR DATA SHEET DS04-23505-1E ASSP CMOS FRONT-END LSI MB54501 ■ DESCRIPTION The Fujitsu MB54501 includes a low-noise amplifier and a mixer, which are used for front end of mobile telecommunication systems. Using Fujitsu’s advanced technology, MB54501 achieves an Icc of 6.0mA (typ.). ■ FEATURES Amplifier • • • • • • • • Mixer Supply voltage 3V (typ.) 3V (typ.) Current consumption 3mA (typ.) 3mA (typ.) Input frequency 1.1GHz (max.) 1.1GHz (max.) *1 15dB (typ.)*2 Gain 14dB (typ.) *1 Noise figure 2.2dB (typ.) 5dB (SSB, typ.)*2 1dB compression point –1dBm (typ.)*1 Input return loss 8dB (typ.)*1 Output return loss 10dB (typ.)*1 *1: Measured by the circuit of “measurement circuit example”. (fin = 878MHz) *2: Measured by the circuit of “measurement circuit example”. (IF = 90MHz) • 16-pin Plastic Shrink Small Outline Package (Suffix: -PFV) ■ PACKAGE 16-pin Plastic SSOP (FPT-16P-M05) MB54501 ■ PIN ASSIGNMENT (TOP VIEW) RFout 1 16 Lext GND 2 15 RFin GND 3 14 Rext VCC 4 13 NC NC 5 12 RE GND 6 11 RE GND 7 10 GND MIXin 8 9 MIXout (FPT-16P-M05) ■ ABSOLUTE MAXIMUM RATINGS Parameters Symbol Value Unit Supply Voltage VCC –0.5 to 7.0 V Output Voltage VO –0.5 to VCC + 0.5 V Output Current IO 0 to 10 mA TSTG –55 to +125 °C Storage Temperature Note: Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 MB54501 ■ EQUIVALENT CIRCUIT Vcc RFout Main Bias Circuit Lext Main Bias Circuit RFin MIXout MIXin Rext RE Amplifier Mixer ■ PIN DESCRIPTION Pin No. Pin Name Description 1 RFout Amplifier output 2 GND 3 Pin No. Pin Name 9 MIXout Ground 10 GND GND Ground 11 4 VCC Power supply 12 5 NC No connection 6 GND 7 8 Description Mixer output Ground RE Emitter of a transistor for mixer 13 NC No connection Ground 14 Rext Emitter of a transistor for amplifier GND Ground 15 RFin Amplifier input MIXin Mixer input 16 Lext Amplifier load connection 3 MB54501 ■ RECOMMENDED OPERATING CONDITIONS Value Parameter Symbol Unit Min. Typ. Max. VCC 2.7 3.0 5.5 V Input Voltage VI GND – VCC V Operating Temperature Ta –40 – +85 °C Supply Voltage Notes: To protect against damage by electrostatic discharge, note the following handling precautions: – Store and transport devices in conductive containers. – Use properly grounded workstations, tools, and equipment. – Turn off power before inserting or removing this device into or from a socket. – Protect leads with conductive sheet, when transporting a board mounted device. 4 MB54501 ■ ELECTRICAL CHARACTERISTICS AMPLIFIER (Vcc = +3.0V, Ta = 25°C) Parameter Symbol Conditions Supply Voltage VCC Supply Current Operating Frequency Target Value Unit Min. Typ. Max. –– 2.7 3.0 5.5 V ICC –– –– 3.0 –– mA fin –– –– 878 1100 MHz Gain –– –– 14 –– dB Noise Figure NF –– –– 2.2 –– dB 1dB Compression Point P1dB Output –– –1 –– dBm Input Return Loss RLIN –– –– 8 –– dB RLOUT –– –– 10 –– dB Gain Output Return Loss Remark: Electrical characteristics depend on external circuits (elements) or status of mounting. The above characteristics are measured by the test circuit in the next page. MIXER (Vcc = +3.0V, Ta = 25°C) Parameter Symbol Conditions Supply Voltage VCC Current Consumption Target Value Unit Min. Typ. Max. –– 2.7 3.0 5.5 V ICC –– –– 3.0 –– mA Operating Frequency fin –– –– 878 1100 MHz Gain S21 Amplifier characteristics –– 9 –– dB Conversion Gain GC –– –– 15 –– dB Noise Figure NF Mixer characteristics IF = 90MHz SSB –– 5 –– dB Remark: Electrical characteristics depend on external circuits (elements) or status of mounting. The above characteristics are measured by the test circuit in the next page. 5 MB54501 ■ MEASUREMENT CIRCUIT (EXAMPLE) 2nH 100p 50Ω Measuring apparatus 1 RFout Lext 16 878MHz 3.9n 100p 2 GND RFin 15 6.8n 3 GND Rext 14 1000p 1µ 1000p Vcc = 3V RF = 878MHz 4 Vcc NC 13 5 NC RE 12 6 GND RE 11 7 GND GND 10 1000p Vcc = 3V 1000p SAW 100p 3p 100p 8 5.6n MIXin MIXout 9 1µ 150n 1000p SAW 20p LO = 788MHz 6 30p IF = 90MHz 50Ω Measuring apparatus MB54501 ■ PACKAGE DIMENSIONS *: This dimension does not include resin protrusion. 16pins, Plastic SSOP (FPT-16P-M05) +0.20 * 5.00±0.10(.197±.004) 1.25 –0.10 +.008 .049 –.004 0.10(.004) INDEX *4.40±0.10 (.173±.004) 0.65±0.12 (.0256±.0047) 4.55(.179)REF +0.10 0.22 –0.05 +.004 .009 –.002 6.40±0.20 (.252±.008) 5.40(.213) NOM "A" +0.05 0.15 –0.02 +.002 .006 –.001 Details of "A" part 0.10±0.10(.004±.004) (STAND OFF) 0 10° 0.50±0.20 (.020±.008) Dimensions in mm (inches). C 1994 FUJITSU LIMITED F16013S-2C-4 7 MB54501 FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-8588, Japan Tel: (044) 754-3763 Fax: (044) 754-3329 http://www.fujitsu.co.jp/ North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, USA Tel: (408) 922-9000 Fax: (408) 922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) Tel: (800) 866-8608 Fax: (408) 922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 D-63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 http://www.fujitsu-ede.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE LTD #05-08, 151 Lorong Chuan New Tech Park Singapore 556741 Tel: (65) 281-0770 Fax: (65) 281-0220 http://www.fmap.com.sg/ F9803 FUJITSU LIMITED Printed in Japan 8 All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.