1.27 Pitch Coaxial Ribbon Cable Connector HIF6R Series Connection Type ■Features Applicable Coaxial Ribbon Cable 1.Coaxial Ribbon Cable Connector Assemble 1.27mm pitch coaxial ribbon cable AWG#30 in insulation displacement at a time. Usable cable characteristic impedance is 50 ohms. 2. Compatibility The pin header side is HIF3 series. 3. Short Preventive Mechanism The socket side is equipped with a convex portion in order to prevent false-insertion. ■Applications Computers, peripheral and terminal equipment, communication transmission equipment, medical electronic apparatuses, measuring instruments, other various office automation machines, etc. ■Product Specifications Rating Current rating: 0.5A Voltage rating: 30V AC Item Operating Temperature Range:-55 to +85ç (Note 1) Storage Temperature Range:-10 to +60ç (Note 2) Storage Humidity Range: 40 to 70% Operating Humidity Range:40 to 80% Specification Condition 1.Insulation Resistance 1000M ohms min. 250V DC 2.Withstanding voltage No flashover or insulation breakdown. 300V AC/1 minute 3.Contact Resistance 30m ohms max. 0.1mA 4.Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. No electrical discontinuity of 1µs or more 5.Humidity (Steady state) Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6.Temperature Cycle No damage, cracks, or parts looseness. (-65ç: 30 minutes➝15 to 35ç: 5 minutes max. 125ç: 30 minutes➝15 to 35ç: 5 minutes max.)5 cycles 7.Durability Contact resistance: signal: 30m ohms max (Mating/un-mating) 500 cycles 8.Resistance to Soldering heat No deformation of Flow: 260ç for 10 seconds components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. D19 ■Material Part Material Insulator Finish Remarks PBT Socket Contact Copper alloy Metal clamp Black UL94V-0 Selective gold plated --------------- --------------- --------------- Stainless steel ■Ordering Information HIF6 1 R - * S D - AA - L 2 3 4 5 6 7 1 Series Name: HIF 2 Coaxial ribbon cable: R 3 Number of Contacts: 40, 80, 100 4 S: Socket 5 D: Characteristic impedance: 50 ohms 6 Cable length (cm) Shortest: 10cm ■Socket ● Type AA (50 ohms) Unit: mm Part Number D20 Number of CL No. Contacts Number of Contacts A HIF6R-040SD-AA-L 630-7003-8 40 31.25 HIF6R-080SD-AA-L 630-7002-5 80 56.65 HIF6R-100SD-AA-L 630-7001-2 100 69.35 ■Pin Header HIR6R series engages in or from the pin header mounted on the printed board. Please use the HIF6H series connector for the pin header. ● HIF6H Right Angle Type BPCB mounting pattern Unit: mm Number of Contacts Part Number CL No. HIF6H-040PA-1.27DS 630-0161-0 A B C D E F HIF6H-080PA-1.27DS 630-0164-9 80 69.05 49.53 67.45 56.85 59.69 88.85 HIF6H-100PA-1.27DS 630-0165-1 100 81.75 62.23 80.15 69.55 72.39 101.5 40 43.65 24.13 42.05 31.45 34.29 63.45 ● HIF6H Straight Type BPCB mounting pattern Unit: mm Number of Contacts Part Number CL No. HIF6H-40PA-1.27DSA 630-0171-4 A B C D E F G HIF6H-80PA-1.27DSA 630-0174-2 80 69.05 49.53 67.45 56.85 53.05 59.69 88.85 HIF6H-100PA-1.27DSA 630-0175-5 100 81.75 62.23 80.15 69.55 65.75 72.39 101.55 40 43.65 24.13 42.05 31.45 27.65 34.29 63.45 D21 BConnection Circuit Diagram Note: The ground terminal should be used commonly on the printed board side. BSignal Alignment ● Socket (Cable) side ● Pin Header (Board) Side Note: The ground terminal should be used commonly on the printed board side. BCoaxial Ribbon Cable Specification Electrical Characteristics Usable Materials (1) Don't round the cable. (2) Don't fold the cable in two at bending radius R25 or less (180 deg.). (3) Don't fold the cable in two in order to change the direction. Coaxial Ribbon Cable Specification Size Construction ●Cautions for Handling Cables Impedance 50±5 ohms Static Capacitance 80PF/m Delay Time 3.9ns/m Max. Conductor Resistance 360 ohms/km Inner Conductor Ø0.26mm, silver plated copper wire Dielectric material Foaming fluorine resin External conductor Aluminum foil Ø0.26mm, silver plated copper wire Jacket PVC (gray) Cable mark Yellow Core wire number 20,40,50 Thickness 1.2mm Width *N∞1.27mm UL Style No. 20182 Note: N= number of contacts D22