FAIRCHILD HLMP

SUBMINIATURE T-3/4 LED
DIFFUSED AND CLEAR LAMPS
HIGH EFF. RED
YELLOW
GREEN
AIGaAs RED
HLMP-6305A
HLMP-6405A
HLMP-6505A
HLMP-Q105A
HLMP-Q101A
Water Clear
Water Clear
Water Clear
Water Clear
Red Diffused
MV6700A
MV6300A
MV6400A
HLMP-Q150A
HLMP-Q155A
Red Diffused
Yellow Diffused
Green Diffused
Red Diffused
Water Clear
FEATURES
PACKAGE DIMENSIONS
• Subminiature T-3/4 transfer molded
.087 (2.2)
.079 (2.0)
• Low package profile
• Axial leads
.276 (7.0)
MIN
.024 (.6)
.016 (.4)
• Wide viewing angle
• SMT versions
.091 (2.3)
.083 (2.1)
DIA
.020 (.5)
.012 (.3)
.075 (1.9)
.063 (1.6)
.010 (.26)
.002 (.06)
DESCRIPTION
.058 (1.48)
.050 (1.28)
.056 (1.44)
.048 (1.24)
These T-3/4 subminiature LED lamps feature a squarebase, transfer molded package for surface mount
applications. A tinted diffused or water clear epoxy
lens — available in AIGaAs red, high-efficiency red,
green, and yellow — produces wide-angle beam
emission and sharp on/off contrast. They are available
with gullwing lead bends for top mounting, as well as
yoke lead bends and Z-bends for mounting to the back
of a PCB.
.031 (.78)
.023 (.58)
CATHODE MARK
(COLOR STRIPE ON SIDE OF PACKAGE)
NOTES:
ALL DIMENSIONS ARE IN INCHES (mm).
ABSOLUTE MAXIMUM RATING c
HLMP-6305A
MV6700A
HLMP-6405A
MV6300A
HLMP-6505A
MV6400A
HLMP-Q101A
HLMP-Q105A
HLMP-Q150A
HLMP-Q155A
Power Dissipation
135
85
135
85
mW
Average Forward Current
30
20
30
30
mA
Peak Forward Current
(1 µS pulsewidth, 0.1% DF)
90
60
90
300
mA
Lead Soldering Time at 260°C
5
5
5
5
sec
Operating Temperature
-55 to +100
-55 to +100
-50 to +100
-20 to +100
°C
Storage Temperature
-55 to +100
-55 to +100
-50 to +100
-20 to +100
°C
Parameter
© 2003 Fairchild Semiconductor Corporation
Page 1 of 6
Units
7/14/03
SUBMINIATURE T-3/4 LED
DIFFUSED AND CLEAR LAMPS
HIGH EFF. RED
YELLOW
GREEN
AIGaAs RED
HLMP-6305A
HLMP-6405A
HLMP-6505A
HLMP-Q105A
HLMP-Q101A
Water Clear
Water Clear
Water Clear
Water Clear
Red Diffused
MV6700A
MV6300A
MV6400A
HLMP-Q150A
HLMP-Q155A
Red Diffused
Yellow Diffused
Green Diffused
Red Diffused
Water Clear
ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C)
Part Number QTLP-
MV6700A
MV6300A
MV6400A
HLMP-Q150A
Minimum
1.0
1.0
1.0
1.0*
Typical
3.0
3.0
3.0
1.8*
Luminous Intensity (mcd)
Condition
IF = 10mA
*Tested at IF = 1mA
IF = 10mA
Forward Voltage (V)
Maximum
3.0
3.0
3.0
1.8*
Typical
1.8
2.0
2.0
1.6*
*Tested at IF = 1mA
Peak Wavelength (nm)
635
585
565
660
IF = 10mA
Spectral Line Half Width (nm)
40
36
28
20
IF = 10mA
Reverse Voltage (V)
5
5
5
5
IR = 100µA
Viewing Angle (°)
50
50
50
50
IF = 10mA
ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C)
Part Number QTLP-
HLMP6305A
HLMP6405A
HLMP6505A
HLMPQ101A
HLMP-Q105A/
Q155A
Luminous Intensity (mcd)
Condition
IF = 10mA
Minimum
3.0
3.0
3.0
22**
20.0**/2.0*
**Tested at IF = 1mA
Typical
12.0
12.0
12.0
45**
50.0**/4.0*
**Tested at IF = 20mA
Maximum
3.0
3.0
3.0
2.4**
2.4**/1.8*
*Tested at IF = 1mA
Typical
1.8
2.0
2.0
1.8**
1.8**/1.6*
**Tested at IF = 20mA
Peak Wavelength (nm)
635
585
565
660
660
IF = 10mA
Spectral Line Half Width (nm)
40
36
28
20
20
IF = 10mA
Reverse voltage (V)
5
5
5
5
5
IR = 100µA
Viewing Angle (°)
25
25
25
50
25
IF = 10mA
Forward Voltage (V)
IF = 10mA
© 2003 Fairchild Semiconductor Corporation
Page 2 of 6
7/14/03
SUBMINIATURE T-3/4 LED
DIFFUSED AND CLEAR LAMPS
HIGH EFF. RED
YELLOW
GREEN
AIGaAs RED
HLMP-6305A
HLMP-6405A
HLMP-6505A
HLMP-Q105A
HLMP-Q101A
Water Clear
Water Clear
Water Clear
Water Clear
Red Diffused
MV6700A
MV6300A
MV6400A
HLMP-Q150A
HLMP-Q155A
Red Diffused
Yellow Diffused
Green Diffused
Red Diffused
Water Clear
TYPICAL PERFORMANCE CURVES
Fig. 2 Relative Luminous Intensity vs.
DC Forward Current
Fig. 1 Forward Current vs. Forward Voltage
2.5
90
RELATIVE LUMNOUS INTENSITY
(NORMALIZED AT 10 mA)
IF - FORWARD CURRENT (mA)
80
AlGaAs
RED
70
60
HER
50
YELLOW
40
30
20
10
0
1.0
2.0
HER
YELLOW
GREEN
1.5
1.0
AlGaAs
RED
0.5
GREEN
0.0
2.0
3.0
4.0
5.0
0
5
VF - FORWARD VOLTAGE (V)
10
15
IF - DC FORWARD CURRENT (mA)
Fig. 3 Relative Intensity vs. Peak Wavelength
1.0
RELATIVE INTENSITY
GREEN
AlGaAs RED
YELLOW
0.5
HER
0
500
550
600
650
700
750
WAVELENGTH (nm)
© 2003 Fairchild Semiconductor Corporation
Page 3 of 6
7/14/03
SUBMINIATURE T-3/4 LED
DIFFUSED AND CLEAR LAMPS
HIGH EFF. RED
YELLOW
GREEN
AIGaAs RED
HLMP-6305A
HLMP-6405A
HLMP-6505A
HLMP-Q105A
HLMP-Q101A
Water Clear
Water Clear
Water Clear
Water Clear
Red Diffused
MV6700A
MV6300A
MV6400A
HLMP-Q150A
HLMP-Q155A
Red Diffused
Yellow Diffused
Green Diffused
Red Diffused
Water Clear
RECOMMENDED PRINTED CIRCUIT BOARD PATTERN
0.106 (2.68)
0.035 (0.89)
0.035 (0.89)
0.035 (0.89)
For Gullwing Lead Bend
RECOMMENDED REFLOW SOLDERING PROFILE
5 sec MAX
soldering time
240° C MAX
+5° C/s MAX
-5° C/s MAX
60 - 120 sec
Preheating
120 - 150° C MAX
© 2003 Fairchild Semiconductor Corporation
Page 4 of 6
7/14/03
SUBMINIATURE T-3/4 LED
DIFFUSED AND CLEAR LAMPS
HIGH EFF. RED
YELLOW
GREEN
AIGaAs RED
HLMP-6305A
HLMP-6405A
HLMP-6505A
HLMP-Q105A
HLMP-Q101A
Water Clear
Water Clear
Water Clear
Water Clear
Red Diffused
GULLWING LEAD CONFIGURATION
MV6700A
MV6300A
MV6400A
HLMP-Q150A
HLMP-Q155A
Red Diffused
Yellow Diffused
Green Diffused
Red Diffused
Water Clear
FEATURES
.087 (2.2)
.079 (2.0)
• Available in Gullwing, Yoke and Z-bend lead formings
• Compatible with automatic placement equipment
ANODE
CATHODE
• Compatible with vapor phase reflow soldering processes
.091 (2.3)
.083 (2.1)
• Long life — solid state reliability
• Reel and tape or bulk packaging available
.024 (.6)
.016 (.4)
.020 (.5)
.012 (.3)
.154 (3.90)
.148 (3.75)
DESCRIPTION
These subminiature solid state lamps are transfer molded in an
axial lead package. They are available in yellow, green, high
efficiency red and AIGaAs red in both diffused and water clear
lens.
.078 (1.9)
.063 (1.6)
.115 (2.92)
.099 (2.52)
.058 (1.48)
.050 (1.28)
.010 (.26)
.002 (.06)
Automatic placement equipment can be used to mount the
LEDs on the PC board. The lamps can be mounted using
either batch or in line vapor phase reflow solder processes.
NOTES:
.033 (.82)
.000 (.00)
.016 (.4)
.008 (.2)
.039 (1.0)
.028 (.7)
ALL DIMENSIONS ARE IN INCHES (mm)
YOKE LEAD CONFIGURATION
.087 (2.2)
.079 (2.0)
.020 (.5)
.012 (.3)
.087 (2.2)
.079 (2.0)
ANODE
CATHODE
.091 (2.3)
.083 (2.1)
.091 (2.3)
.083 (2.1)
.024 (.6)
.016 (.4)
.024 (.6)
.016 (.4)
CATHODE
.300 (7.62) MAX
.078 (1.9)
.063 (1.6)
.115 (2.92)
.099 (2.52)
Z-BEND LEAD CONFIGURATION
.058 (1.48)
.050 (1.28)
.117 (2.96)
.100 (2.56)
© 2003 Fairchild Semiconductor Corporation
.240 (6.1)
.232 (5.9)
.020 (.5)
.012 (.3)
ANODE
.128 (3.24)
.112 (2.84)
.047 (1.2)
.031 (0.8)
.010 (.26)
.002 (.06)
.039 (.99)
.023 (.59)
.078 (1.9)
.063 (1.6)
.033 (.85)
.026 (.65)
.048 (1.22)
.032 (.82)
.058 (1.48)
.050 (1.28)
.033 (.85)
.026 (.66)
Page 5 of 6
.010 (.26)
.002 (.06)
.189 (4.8)
.173 (4.4)
.034 (.86)
.026 (.66)
7/14/03
SUBMINIATURE T-3/4 LED
DIFFUSED AND CLEAR LAMPS
HIGH EFF. RED
YELLOW
GREEN
AIGaAs RED
HLMP-6305A
HLMP-6405A
HLMP-6505A
HLMP-Q105A
HLMP-Q101A
Water Clear
Water Clear
Water Clear
Water Clear
Red Diffused
MV6700A
MV6300A
MV6400A
HLMP-Q150A
HLMP-Q155A
Red Diffused
Yellow Diffused
Green Diffused
Red Diffused
Water Clear
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
© 2003 Fairchild Semiconductor Corporation
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
Page 6 of 6
7/14/03