FAIRCHILD KSH44H11I

KSH44H11
KSH44H11
General Purpose Power and Switching Such
as Output or Driver Stages in Applications
D-PAK for Surface Mount Applications
•
•
•
•
•
Lead Formed for Surface Mount Application (No Suffix)
Straight Lead (I-PAK, “- I” Suffix)
Electrically Similar to Popular KSE44H
Fast Switching Speeds
Low Collector Emitter Saturation Voltage
1
D-PAK
1.Base
I-PAK
1
2.Collector
3.Emitter
NPN Epitaxial Silicon Transistor
Absolute Maximum Ratings TC=25°C unless otherwise noted
Symbol
VCEO
Collector-Emitter Voltage
Parameter
Value
80
Units
V
VEBO
Emitter-Base Voltage
5
V
IC
Collector Current (DC)
8
A
ICP
Collector-Current (Pulse)
16
A
PC
Collector Dissipation (TC=25°C)
20
W
Collector Dissipation (Ta=25°C)
1.75
W
TJ
Junction Temperature
150
°C
TSTG
Storage Temperature
- 65 ~ 150
°C
Electrical Characteristics TC=25°C unless otherwise noted
Symbol
VCEO(sus)
Parameter
* Collector-Emitter Sustaining Voltage
Test Condition
IC = 30mA, IB = 0
Min.
80
Typ.
Max.
Units
V
ICEO
Collector Cut-off Current
VCE = 80V, IB = 0
10
µA
IEBO
Emitter Cut-off Current
VBE = 5V, IC = 0
50
µA
hFE
DC Current Gain
VCE = 1V, IC = 2A
VCE = 1V, IC = 4A
60
40
VCE(sat)
Collector-Emitter Saturation Voltage
IC = 8A, IB = 0.4A
1
V
VBE(on)
Base-Emitter On Voltage
IC = 8A, IB = 0.8A
1.5
V
fT
Current Gain Bandwidth Product
VCE = 10V, IC = 0.5A
50
MHz
Cob
Output Capacitance
VCB =10V, f = 1MHz
130
pF
tON
Turn On Time
300
ns
tSTG
Storage Time
IC = 5A
IB1 = - IB2 = 0.5A
500
ns
tF
Fall Time
140
ns
* Pulse Test: PW≤300µs, Duty Cycle≤2%
©2002 Fairchild Semiconductor Corporation
Rev. A3, October 2002
KSH44H11
Typical Characteristics
100
1000
IC[A], COLLECTOR CURRENT
hFE, DC CURRENT GAIN
VCE = 1V
100
10
ICP(max)
10
10
50
IC(max)
1m
s
0µ
0µ
s
s
5m
s
DC
1
0.1
0.01
1
0.01
0.1
1
10
IC[A], COLLECTOR CURRENT
1
10
100
1000
VCE [V], COLLECTOR-EMITTER VOLTAGE
Figure 1. DC current Gain
Figure 2. Safe Operating Area
PC[W], POWER DISSIPATION
25
20
15
10
5
0
0
25
50
75
100
125
150
175
o
TC[ C], CASE TEMPERATURE
Figure 3. Power Derating
©2002 Fairchild Semiconductor Corporation
Rev. A3, October 2002
KSH44H11
Package Dimensions
D-PAK
0.50 ±0.10
MIN0.55
0.91 ±0.10
0.76 ±0.10
0.50 ±0.10
1.02 ±0.20
2.30TYP
[2.30±0.20]
(2XR0.25)
(1.00)
(3.05)
6.10 ±0.20
2.70 ±0.20
9.50 ±0.30
6.60 ±0.20
(5.34)
(5.04)
(1.50)
(0.70)
2.30 ±0.20
(0.90)
6.10 ±0.20
2.30 ±0.10
(0.10)
2.30TYP
[2.30±0.20]
(0.50)
0.89 ±0.10
MAX0.96
(4.34)
2.70 ±0.20
0.80 ±0.20
0.60 ±0.20
(0.50)
9.50 ±0.30
5.34 ±0.30
0.70 ±0.20
6.60 ±0.20
0.76 ±0.10
Dimensions in Millimeters
©2002 Fairchild Semiconductor Corporation
Rev. A3, October 2002
KSH44H11
Package Dimensions (Continued)
I-PAK
2.30 ±0.20
6.60 ±0.20
5.34 ±0.20
2.30TYP
[2.30±0.20]
±0.20
±0.30
16.10
±0.20
±0.30
9.30
0.76 ±0.10
1.80
0.80
MAX0.96
0.50 ±0.10
6.10
±0.20
(0.50)
0.70
(4.34)
±0.10
0.60
±0.20
(0.50)
2.30TYP
[2.30±0.20]
0.50 ±0.10
Dimensions in Millimeters
©2002 Fairchild Semiconductor Corporation
Rev. A3, October 2002
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx™
FACT™
ActiveArray™
FACT Quiet series™
Bottomless™
FAST®
FASTr™
CoolFET™
CROSSVOLT™ FRFET™
GlobalOptoisolator™
DOME™
EcoSPARK™
GTO™
E2CMOS™
HiSeC™
EnSigna™
I2C™
Across the board. Around the world.™
The Power Franchise™
Programmable Active Droop™
ImpliedDisconnect™
ISOPLANAR™
LittleFET™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerTrench®
QFET™
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
SILENT SWITCHER®
SMART START™
SPM™
Stealth™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
TruTranslation™
UHC™
UltraFET®
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, or (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In
Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
©2002 Fairchild Semiconductor Corporation
Rev. I1