1.5KE6.8(C)A - 1.5KE440(C)A Features • • • • • • Glass passivated junction. 1500W Peak Pulse Power capability at 1.0 ms. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. Typical IR less than 1.0 µA above 10V. 1.0 min (25.4) Dimensions in inches (mm) 0.375 (9.525) 0.265 (6.731) 0.210 (5.334) 0.188 (4.775) DO-201AE COLOR BAND DENOTES CATHODE 0.042 (1.067) 0.037 (0.940) DEVICES FOR BIPOLAR APPLICATIONS - Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions. 1500 Watt Transient Voltage Suppressors Absolute Maximum Ratings* Symbol TA = 25°C unless otherwise noted Parameter PPPM Peak Pulse Power Dissipation at TA = 25°C, TP=1ms IPPM Peak Pulse Current PD Tstg Steady State Power Dissipation .375 " lead length @ TA = 75°C Peak Forward Surge Current superimposed on rated load (JEDEC method) Storage Temperature Range TJ Operating Junction Temperature if(surge) (Note 1) *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Note 1: Measured on 8.3 ms single half-sine wave; Duty cycle = 4 pulses per minute maximum. 1998 Fairchild Semiconductor Corporation Value Units minimum 1500 W see table A 5.0 W 200 -65 to +175 A °C -65 to +175 °C 1.5KE6.8(C)A - 1.5KE440(C)A Discrete POWER & Signal Technologies (continued) Electrical Characteristics Uni-directional Bi-directional (C) Device 1.5KE6.8(C)A 1.5KE7.5(C)A 1.5KE8.2(C)A 1.5KE9.1(C)A 1.5KE10(C)A 1.5KE11(C)A 1.5KE12(C)A 1.5KE13(C)A 1.5KE15(C)A 1.5KE16(C)A 1.5KE18(C)A 1.5KE20(C)A 1.5KE22(C)A 1.5KE24(C)A 1.5KE27(C)A 1.5KE30(C)A 1.5KE33(C)A 1.5KE36(C)A 1.5KE39(C)A 1.5KE43(C)A 1.5KE47(C)A 1.5KE51(C)A 1.5KE56(C)A 1.5KE62(C)A 1.5KE68(C)A 1.5KE75(C)A 1.5KE82(C)A 1.5KE91(C)A 1.5KE100(C)A 1.5KE110(C)A 1.5KE120(C)A 1.5KE130(C)A 1.5KE150(C)A 1.5KE160(C)A 1.5KE170(C)A 1.5KE180(C)A 1.5KE200(C)A 1.5KE220(C)A 1.5KE250(C)A 1.5KE300(C)A 1.5KE350(C)A 1.5KE400(C)A 1.5KE440(C)A Reverse Stand-off Voltage VRWM (V) 5.80 6.40 7.02 7.78 8.55 9.40 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53.0 58.1 64.1 70.1 77.8 85.5 94.0 102.0 111.0 128.0 136.0 145.0 154.0 171.0 185.0 214.0 256.0 300.0 342.0 376.0 TA = 25°C unless otherwise noted Breakdown Voltage VBR (V) min max 6.45 7.13 7.79 8.65 9.50 10.5 11.4 12.4 14.3 15.2 17.1 19.0 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95.0 106.0 114.0 124.0 143.0 152.0 162.0 171.0 190.0 209.0 237.0 285.0 333.0 380.0 418.0 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21.0 23.1 25.2 28.4 31.5 34.7 37.8 41.0 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105.0 116.0 126.0 137.0 158.0 168.0 179.0 189.0 210.0 231.0 263.0 315.0 368.0 420.0 462.0 Test Current IT(mA) 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 * For bidirectional parts with VRWM<10V, the IR max limit is doubled. Max Clamping Voltage @IPPM VC(V) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 26.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 104.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 Max Peak Pulse Surge Current IPPM (A) 143 133 124 112 103 96.2 90.0 82.0 71.0 67.0 59.5 54.2 49.0 45.2 40.0 36.2 33.0 30.1 28.0 25.3 23.2 21.4 19.5 17.7 16.3 14.6 13.3 12.0 11.0 9.9 9.1 8.4 7.2 6.8 6.4 6.1 5.5 4.6 4.5 3.8 3.2 2.8 2.6 Max Reverse Leakage VRWM IR (uA)* 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1.5KE6.8(C)A - 1.5KE440(C)A Transient Voltage Supressors (continued) Typical Characteristics Pulse Derating Curve Peak Pulse Power Rating Curve 100 PULSE POWER (%) PULSE POWER (kW) 100 TA = 25º C 10 1 75 50 25 0 0.1 0.0001 0.001 0.01 0.1 PULSE WIDTH (ms) 1 0 10 25 Pulse Waveform tf = 10µsec Peak Value Ippm 100 TA = 25º C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of Ipp Unidirectional Unidirectional Half Value-Ipp 2 10/1000µsec Waveform as Defined by R.E.A. 50 Bidirectional 100 Measured at Stand-Off Voltage (V mw) 1 2 TIME (ms) 3 10 4 Steady State Power Derating Curve 10 FORWARD SURGE CURRENT (A) 200 3.75 2.5 1.25 0 5 0 25 50 75 100 125 150 LEAD TEMPERATURE ( º C) 175 20 50 100 200 REVERSE VOLTAGE (V) 500 Non-Repetitive Surge Current 5 POWER DISSIPATION (W) Measured at Zero Bias e-kt 0 TA = 25º C f = 1.0 MHz Visg = 50m Vp-p 1000 td 0 200 Junction Capacitance 10000 CAPACITANCE (pF) PEAK PULSE CURRENT (%) 150 50 75 100 125 150 175 AMBIENT TEMPERATURE (º C) 200 T A = T A max 8.3ms Single Half Sine-Wave JEDEC Method 100 50 UNIDIRECTIONAL ONLY 20 10 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 1.5KE6.8(C)A - 1.5KE440(C)A Transient Voltage Supressors