Simple Assembly Type PC Card Frame Kits NX1 Series Back connector 68-contact socket Frame+Metal panel Figure 1 ■Features Simple Assembly Method 1. Great reduction of the number of frame kit assembly steps Use of this simple assembly method has greatly reduced the number of assembly steps. Processes such heat fusion and cooling of the covers are no longer required. Assembly of the frame kit is possible using simple jig tools. (See the Simple Assembly Method insert to the right.). 2. Excellent Shielding Qualities The covered construction using a metal panel out to the sides of the card provide excellent shielding qualities. (See Figure 4.) 3. Board Offset Available in types with board offsets of 0.3mm and 0.9mm. Figure 2 4. Back connectors Back Connectors available with 15,25, and 32 contacts. 5. Can Be Used With CardBus Types 6. Stable Conduction Maintained Between Panels The spring quality of the metal ensures stable conduction to be maintained between the panels at the panel lock portion. 7. Conduction Maintained Between Panel and Board The cunduction between panel and board is maintained by contact between the panel and a one-body ground spring. Figure 3 ■Applications Metal panel covers all the way to the card sides A wide variety of PC cards including LAN, FAX modem, and SCSI. Figure 4 (For details, see the frame Kit assembly procedure on page 6) B2 ■Product Rating Operating temperature range -30ç to +70ç ■Materials Part Material Frame PBT Panel Stainless steel Color Remarks Black UL94V-0 Dull Finish ------- Black 510-FR Insulation tape Polyester ■Ordering Information NX1B L - 32 T - KT 3 B (05) q w e r t y u i r Suitable back connectors q Series name T: NX Series NX1 : General type NX1B : Card bus type K: General type (IC1K Series) B: Card Bus type (IC9 Series) t Connector type KT: Frame kit w Card key type None : 5 V type L : 3.3 V type i Presence of insulation tape 05 : With insulation tape 06 : Without insulation tape y Offset 3: 0.3mm 9: 0.9mm e Number of back connector u Type of suitable 68-contact connectors 15, 25, or 32 ■Connector Mounting Condition 0.25 (Panel thickness + Insulation tape thickness) 5 MAX 0.05 0.5 MAX 2.5 SMT contacts 0.3 Connector portion 0.8 1.4 3.3 0.5 MAX 3.1 SMT contacts 0.9 Connector portion Panel 5 MAX 3.3 Panel 0.25 (Panel thickness + Insulation tape thickness) ●0.3mm Offset Type 0.05 ●0.9mm Offset Type PCB ■Label Dimensions(Recommended Label Thickness: 50µm) 38±0.2 63±0.2 4- R3 .5± 0.2 B3 ■NX1 Series (General Type Frame Kit) Panel A Panel B Number of Offset Contacts (mm) 15 25 32 Frame Kit Part Number Suitable Back Connectors CL No. Part Number CL No. NX1-15T-KT9K(**) 234-2102-5-** IC1K-68RD-1.27SFA NX1-15T-KT3K(**) 234-2103-8-** IC1K-68RD-1.27SF NX1-25T-KT9K(**) 234-2104-0-** IC1K-68RD-1.27SFA 640-0047-2 NX60TB-15SAA9-SP 234-0097-6 640-0046-0 NX60TB-15SAA3-SP 234-0098-9 640-0047-2 NX60TA-25SAA9-SP 234-0107-8 640-0046-0 NX60TA-25SAA3-SP 234-0033-3 0.9 NX1-25T-KT3K(**) 234-2105-3-** IC1K-68RD-1.27SF NX1-32T-KT9K(**) 234-2106-6-** IC1K-68RD-1.27SFA 640-0047-2 NX60TB-32SAA9-SP 234-0023-0 0.3 NX1-32T-KT3K(**) 234-2107-9-** IC1K-68RD-1.27SF 640-0046-0 NX60TA-32SAA3-SP 234-0053-0 0.9 0.3 0.9 0.3 (**) : (05) : With Insulation type (**) : (06) : Without Insulation type B4 Suitable 68-Contact Socket Connectors CL No. Part Number ■NX1B Series (Card Bus Type Frame Kit) Panel A Panel B Number of Offset Contacts (mm) 15 25 32 Frame Kit Part Number Suitable 68-Contact Socket Connectors CL No. Suitable Back Connectors Part Number CL No. Part Number CL No. 0.9 NX1BL-15T-KT9B(**) 234-2153-6-** IC9-68RD-0.635SFA 640-0902-5 NX60TB-15SAA9-SP 234-0097-6 0.3 IC9-68RD-0.635SF 640-0901-2 NX60TB-15SAA3-SP 234-0098-9 0.9 NX1BL-15T-KT3B(**) 234-2154-9-** NX1BL-25T-KT9B(**) 234-2157-7-** IC9-68RD-0.635SFA 640-0902-5 NX60TA-25SAA9-SP 234-0107-8 0.3 NX1BL-25T-KT3B(**) IC9-68RD-0.635SF 640-0901-2 NX60TA-25SAA3-SP 234-0033-3 0.9 NX1BL-32T-KT9B(**) 234-2155-1-** IC9-68RD-0.635SFA 640-0902-5 NX60TB-32SAA9-SP 234-0023-0 0.3 NX1BL-32T-KT3B(**) 234-2156-4-** IC9-68RD-0.635SF 640-0901-2 NX60TA-32SAA3-SP 234-0053-0 _______ (**) : (05) : With Insulation type (**) : (06) : Without Insulation type B5 BBoard Dimensions (Applicable Board Thickness: 0.5 mm Max.) ●NX1 Series (General Type) ●NX1B Series (CardBus Type) Connector mounting side Connector mounting side 0 47 -0.2 0 47 -0.1 0.635∞67=42.545±0.05 45 +0.1 +0 P=0.635±0.03 68-0.4±0.02 8-0.8±0.1 0.635∞67=42.545±0.05 Contact No.67 Contact No.34 Contact No.68 P=0.635±0.03 Contact No.67 Contact No.34 Contact No.68 4.6±0.1 2.5±0.1 2±0.1 1 5.4±0.1 1 R0 .5 R 4± 0. 1 MA X 5.08±0.1 5.08±0.1 Valied parts mounting area 44±0.2 3±0.1 76±0.1 3±0.1 1.5±0.1 2 3.3 +0.1 +0 31.65±0.1 7.4±0.1 0 -0.05 2 0 2.4 -0.05 1.5±0.1 8±0.1 8±0.1 3.3 +0.1 +0 31.65±0.1 2±0.1 0 -0.05 76±0.1 5.08±0.1 Valied parts mounting area Ground clip pad 2±0.1 1.1±0.1 1.1±0.1 0 0.5 -0.05 .1 +0 +0 .6 f0 Last contact No. P=0.8±0.05 D±0.1 C +0.1 +0 B±0.1 Contact No.1 0 0.5 -0.05 .1 +0 .6 +0 f0 Last contact No. A±0.1 P=0.8±0.05 D±0.1 Contact No.1 C +0.1 +0 B±0.1 A±0.1 The dimensions portion of the diagram(i.e.,the dotted line portion) is not required when a positioning jig or another aid is used to mount the connectors. Type NX 1Series (General Type) NX1B Series (Card Bus Type Frame Kit) Part Number Number of Contacts NX1-15T-KT9K(**) 15 NX1-25T-KT9K(**) NX1-32T-KT9K(**) 25 NX1-15T-KT3K(**) NX1-25T-KT3K(**) NX1-32T-KT3K(**) NX1BL-15T-KT9B(**) 32 NX1BL-25T-KT9B(**) NX1BL-32T-KT9B(**) 25 NX1BL-15T-KT3B(**) NX1BL-25T-KT3B(**) NX1BL-32T-KT3B(**) 25 Offset A B C D 31.2 29.8 27.2 11.2 39.2 37.8 35.2 19.2 32 44.8 43.4 40.8 24.8 15 31.2 29.8 27.2 11.2 39.2 37.8 35.2 19.2 44.8 43.4 40.8 24.8 31.2 29.8 27.2 11.2 39.2 37.8 35.2 19.2 32 44.8 43.4 40.8 24.8 15 31.2 29.8 27.2 11.2 39.2 37.8 35.2 19.2 44.8 43.4 40.8 24.8 25 0.9 0.3 15 32 0.9 0.3 ✽Please use "NX Series Flame Kit (Not N X 1) "when print processing the panel. (**) : (05) : With Insulation type (**) : (06) : Without Insulation type B6 5.08±0.1 44±0.2 Ground clip pad NOTE 1 6.35±0.1 5.08±0.1 5.08±0.1 36.83±0.15 7.4±0.1 5.4±0.1 2±0.1 68-0.4±0.02 Contact No.2 Contact No.35 Contact No.1 0 2.4 -0.05 Contact No.2 Contact No.35 Contact No.1 3±0.1 1 BFrame Kit Assembly Process Assembly Process Figure 1 Assembly Process Figure 2 Mount the connectors(68-contact connectors, back connectors) and other parts to the printed circuit board (PCB). Insert the PCB mounting part to panel B (frame press fitting item). NOTE :The procedure for the IC9 Series (suited to the 68-contact connectors and card bus) is to mount the connector body, then insert the ground plate and fasten the lead portion by hand. PCB Back connector 68-Contact connector Panel B Assembly Process Figure 3 Assembly Process Figure 4 Use the assembly jig (described below) to insert panel A. (Press fit + lock) Assembled item Panel A Assembly Jig Assembly Process Figure 5 Affix the label to the indented portion of the panel. NOTE :Hirose Electric Co. Ltd. will not provide label services. (Please refer to the Recommended Label Dimensions Diagram of Page 2.) (The photograph shows the hand press model.) Classification Part Number Without hand press NX1-/CVCK-MP CL No. 902-3530-7 With hand press NX1-/CVCK-MP(01) 902-3530-7(01) B7