Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side ●Straight through hole type Receptacle Side ●Straight through hole PCN10EA- * *P-2.54DSA PCN10EA-* *S-2.54DSA PCN10CA-* *S-2.54DSA PCN10EA-* *S-2.54DSA PCN10DA-* *S-2.54DSA PCN12EA-* *S-2.54DSA PCN12EA-* *S-2.54DSA PCN13EA-* *S-2.54DSA ●Stacking through hole type PCN10H* - * *P-2.54DSA ●Wrapping type PCN10EA-* *S-2.54W* ●Right angle through hole type (mounted on the board edge) PCN10EA-* *P-2.54DS PCN12EA-* *P-2.54DS PCN12EA-* *P-2.54DS ●Right angle through hole type (mounted on the board edge) PCN10BA-* *S-2.54DS ●Right angle through hole type (mounted on the board) PCN10AE-* *P-2.54DS PCN10EA-* *P-2.54DS PCN12AE-* *P-2.54DS PCN12EA-* *P-2.54DS ●Right angle through hole type (mounted on the board) PCN10AE-* *S-2.54DS PCN10CA-* *S-2.54DS PCN13EA-* *S-2.54DS ●Press fit type ●Press fit short pin type PCN11-* *S-2.54PFB-2 PCN11-* *P-2.54W* -2+PCN11-* *P-2.54H-2 ●Press fit long pin type PCN11-* *S-2.54WB-2 ●Cable type PCN10-* *S-2.54C+PCN10-* * * *SC* PCN10-* *S-2.54R A27 BApplication Pattern ■Circuit Protection Function Type ●2-row type ' : Mounting hole center C.L. :Center line ●3-row type 64 contacts : The sequential contacts are indicated at 22 points to contact No.1 to 4 and 26 to 32 in both rows a and b. 100 contacts : The sequential contacts are located at 22 points to a1 and a32. The sequential contact is indicated at 22 points to contact No.1 to 4 and 44 to 50 in both rows a and b. ■Stacking Connector ' *G : 35, 30, 25, 45, 40 A70 : Mounting hole center C.L. :Center line ■Coaxial Connector and High Current Contact Composite Type Pin Header Side ●Right angle through hole type (mounted on the board edge) Receptacle Side ●Straight through hole type PCN10F-* *P-2.54DS PCN10FA-* *S-2.54DSA ●Wrapping type ●Right angle through hole type (mounted on the board) PCN10FA-* *S-2.54W* PCN10FA-* *P-2.54DS ●Right angle through hole type (mounted on the board edge) PCN10FB-* *S-2.54DS ●Right angle through hole type (mounted on the board) PCN10FA-* *S-2.54DS ●Press fit short pin type PCN11F-* *S-2.54PFB-2 ●Press fit long pin type PCN11F-* *S-2.54WB-2 Circuit Protection Function Type Pin Header Side Receptacle Side ●Straight through hole type PCN10MC*-* *S-2.54DSA ●Right angle through hole type PCN10MC*-* *P-2.54DS ●Wrapping type PCN10MC*-* *S-2.54W* A28 PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,Wrapping Type) Double-sided two point Contact System PCN Series ■Features Single-sided two point Contact System 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard. 2. Variation in number of contacts 10, 16, 20, 24, 28, 30, 32, 44, 48, 50, 64, 90, 96, 100, 128, and 144 contacts are available. 3. Two point contact construction PCN10 and 12 series are constructed with high reliable doublesided two point contacts. PCN13 series pursues after cost performance, and constructed with single sided two point contacts. 4. Broad applications DIN standard types of B, C, R, and Q are available. The flux tight product is available. The easy lock pin type to prefix the board is available. 5. Stacking height variation PCN10H series contains 25, 30, 35, 40 and 45mm stacking height. Stacking Connector 6. Circuit protection function available PCN10MC series utilizes a sequence structure for circuit protection function. 7. Cable connector ID connector for ribbon cable is available. The connector is prepared for crimping connection for AWC#26 to 30 cables. ■Application Control equipment, exchange, measuring instruments etc. A29 ■Product Specifications Operating Temperature Range: -55 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Operating Humidity Range: 85% max Storage Humidity Range: 40 to 70% (Note 2) Current rating: 2A Voltage rating: 300V AC Rating Item Specification Condition 1.Insulation Resistance 10 M ohms 100V DC 2.Withstanding Voltage No flashover or insulation breakdown. 1000V AC (insulation displacement, crimping type: 650V AC) /1 minute. 3.Contact Resistance 20m ohms max. 0.1A 4.Vibration No electrical discontinuity of 10µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6 5.Humidity(Steady state) Insulation resistance : 106M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6.Temperature Cycle (-65ç : 30 minutes→15 to 35ç: 5 minutes max.→ 125ç : 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles No damage, cracks, or parts looseness. 500 cycles 7.Durability (Mating/un-mating) Contact resistance : 20m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Parts Material Insulator Contact Finish Remarks PBT Gray UL94V-0 Pin header Brass Contact area: Gold plated --------------- Receptacle Copper alloy Remainer: Tin-lead plated --------------- ■Ordering Information ●PCN 10 Series PCN10 1 1 2 Series Name Blank A B C : D : EA : H : HA : HB : HC : HD : MC : } 2 3 4 5 6 3 Number of contacts: 2-row : 16, 20, 24, 32, 44, 50, 64, 90, 100 : PCN10 mold type (as listed below) 4 Connector type Flux prevention type (DSA only) Rack installation type With Board prefixed lock pin Stacking height 35mm type Stacking height 30mm type Stacking height 25mm type Stacking height 45mm type Stacking height 40mm type Circuit Protection function type * * A30 A – * P – 2.54 DS 5 Contact pitch 6 Contact type DS DSA WA WB R C 3-row : 48, 96, 144 4-row : 128 : P : Pin header : S : Receptacle : 2.54mm : Right angle through hole type : Straight through hole type : Wrapping type (0.5tx0.7W) : Wrapping type (0.5tx0.5W) : Insulation displacement type : Crimping type ●PCN 12 Series (Plug) PCN12 A - * P - 2.54 DS 1 2 3 q Series name : PCN12 w No symbol : DIN standard type C (96 Contacts) A E-EA 4 5 6 e Number of contacts : 2-row: 10, 16, 20, 24, 28, 32, 44, 50, 64, 90, 100 3-row: 96 : Original type : With board prefixed lock pin type r P : Plug t Contact pitch : 2.54mm y Contact type : DS: Right angle through hole type ●PCN 12E-*S-2.54 DSA(Socket) PCN12 1 E - * S - 2.54 DSA 2 3 4 5 6 S : Socket q Series name : PCN12 r w No symbol : Standard type t Contact pitch E : With board prefixed lock pin type y Contact type : 2.54mm : DSA: Straight through hole type e Number of contacts : 2-row: 10, 16, 20, 28, 32, 44, 50, 64, 90, 100 3-row: 96 ●PCN 13E-*S-2.54 DSA (Socket) PCN13 1 E - * S - 2.54 DSA 2 3 4 5 6 q Series name : PCN13 r w No symbol : Standard type t Contact pitch : 2.54mm : With board prefixed easy pin type y Contact style : DS: Right angle through hole type E e Number of contacts : 2-row: 10, 16, 20, 30, 32, 44, 50, S : Socket : DSA: Straight through hole type 64, 90, 100 3-row: 48, 96 *PCN13 series are only socket type. PCN10 and 12 series are mating connectors. A31 BDIN Connector Mating Condition DIN connectors of Hirose should be used under conditions as illustrated below. A32 BContact numbers According to the inter-combination with DIN standard type C (type B) and type R (type Q), the contact numbers and row numbers represent contact No. (No.1 to 32) and row No. (a, b, c). ●DIN standard type C and type R represent the 3-row 96 contacts type, including 32 contacts in single-row. ●DIN standard type B and type Q represent the 2-row 64 contacts type, including 32 contacts in single-row. 1 Receptacle straight type Type C (Type B) 3 Pin header straight type Type R (Type Q) 2 Pin header right angle type Type C (Type B) 4 Receptacle right angle type Type R (Type Q) Note: The DIN connector is basically standardized in combination with straight and right angle types. As shown above in illustrationss; The contact numbers is matched in combination with (1)-(2) and (3)-(4), while the contact numbers are inverted in combination with (1)-(2) and (3)-(4). A33 PCN10 Series ■Pin Header: 2-row Right Angle Type (DIN standard type B) Unit:mm PCN10-*P-2.54DS BPCB mounting pattern Part Number CL No. Number of Contacts A B C D PCN10- 16P-2.54DS 583-0230-9 16 33.04 24.39 17.78 27.94 PCN10- 20P-2.54DS 583-0077-3 20 38.12 29.47 22.86 33.02 PCN10- 32P-2.54DS 583-0015-6 32 53.36 44.71 38.10 48.26 PCN10- 44P-2.54DS 583-0038-1 44 68.60 59.95 53.34 63.50 PCN10- 50P-2.54DS 583-0016-9 50 76.22 67.57 60.96 71.12 PCN10- 64P-2.54DS 583-0017-1 64 94.00 85.35 78.74 88.90 PCN10- 90P-2.54DS 583-0018-4 90 127.02 118.37 111.76 121.92 PCN10-100P-2.54DS 583-0113-5 100 139.72 131.07 124.46 134.62 ■Pin Header: 2-row Right Angle Type PCN10A-*P-2.54DS Unit:mm BPCB mounting pattern A34 Part Number CL No. Number of Contacts A B C D PCN10A-016P-2.54DS 583-0231-1 16 33.04 24.39 17.78 27.94 PCN10A-020P-2.54DS 583-0078-6 20 38.12 29.47 22.86 33.02 PCN10A-032P-2.54DS 583-0011-5 32 53.36 44.71 38.10 48.26 PCN10A-044P-2.54DS 583-0039-4 44 68.60 59.95 53.34 63.50 PCN10A-050P-2.54DS 583-0012-8 50 76.22 67.57 60.96 71.12 PCN10A-064P-2.54DS 583-0013-0 64 94.00 85.35 78.74 88.90 PCN10A-090P-2.54DS 583-0014-3 90 127.02 118.37 111.76 121.92 PCN10A-100P-2.54DS 583-0114-8 100 139.72 131.07 124.46 134.62 ■Pin Header: 2-row Right Angle Type ●With Board prefixed lock pin Unit:mm PCN10EA*P-2.54DS ●The PCB mounting pattern is equivalent to PCN10A-*P-2.54DS. (Refer to page A34.) Part Number CL No. Number of Contacts A B C D PCN10EA-016P-2.54DS 583-0256-2 16 33.04 24.39 17.78 27.94 PCN10EA-020P-2.54DS 583-0181-5 20 38.12 29.47 22.86 33.02 PCN10EA-032P-2.54DS 583-0182-8 32 53.36 44.71 38.10 48.26 PCN10EA-044P-2.54DS 583-0183-0 44 68.60 59.95 53.34 63.50 PCN10EA-050P-2.54DS 583-0184-3 50 76.22 67.57 60.96 71.12 PCN10EA-064P-2.54DS 583-0185-6 64 94.00 85.35 78.74 88.90 PCN10EA-090P-2.54DS 583-0186-9 90 127.02 118.37 111.76 121.92 PCN10EA-100P-2.54DS 583-0187-1 100 139.72 131.07 124.46 134.62 ■Pin Header: 2-row Straight Type PCN10-*P-2.54DSA *Type Q differs in the outer dimensions and PCB mounting pattern. Unit:mm BPCB mounting pattern Part Number CL No. Number of Contacts A PCN10-020P-2.54DSA 583-0139-9 20 43.30 38.10 29.47 B C 22.86 D PCN10-032P-2.54DSA 583-0007-8 32 58.54 53.34 44.71 38.10 PCN10-044P-2.54DSA 583-0488-8 44 73.78 68.58 59.95 53.54 PCN10-050P-2.54DSA 583-0008-0 50 81.40 76.20 67.57 60.96 Note PCN10-064P-2.54DSA 583-0009-3 64 99.18 93.98 85.35 78.74 PCN10-090P-2.54DSA 583-0010-2 90 132.20 127.00 118.37 111.76 PCN10-100P-2.54DSA 583-0251-9 100 144.90 139.70 131.07 124.46 Note: DIN standard type Q (Reverse type of type B) indicates PCN10Q-64P-2.54DSA. A35 ■Receptacle: 2-row Right Angle Type PCN10C-*S-2.54DS *Type Q differs in the external size and PCB mounting pattern. Unit:mm BPCB mounting pattern Part Number CL No. Number of Contacts A B C D PCN10C-20S-2.54DS 583-0201-0 20 43.10 29.12 22.86 38.10 PCN10C-32S-2.54DS 583-0202-3 32 58.34 44.36 38.10 53.34 PCN10C-44S-2.54DS 583-0052-2 44 73.58 59.60 53.34 68.58 PCN10C-50S-2.54DS 583-0168-7 50 81.20 67.22 60.96 76.20 PCN10C-60S-2.54DS 583-0174-0 60 93.90 79.92 73.66 88.90 Note PCN10C-64S-2.54DS 583-0203-6 64 98.98 85.00 78.74 93.98 PCN10C-90S-2.54DS 583-0204-9 90 132.00 118.02 111.76 127.00 PCN10C-100S-2.54DS 583-0178-0 100 144.70 130.72 124.46 139.70 Note: DIN standard type Q (Reverse type of type B) indicates PCN10B-64S-2.54DS. ■Receptacle: 2-row Straight Type (DIN standard type B) PCN10-*S-2.54DSA BPCB mounting pattern Unit:mm Part Number A36 CL No. Number of Contacts A B C D PCN10-32S-2.54DSA 583-0019-7 32 54.36 49.36 44.36 38.10 PCN10-50S-2.54DSA 583-0020-6 50 77.22 72.22 67.22 60.96 PCN10-64S-2.54DSA 583-0021-9 64 95.00 90.00 85.00 78.74 PCN10-90S-2.54DSA 583-0022-1 90 128.02 123.02 118.02 111.76 ■Receptacle: 2-row Wrapping Type (DIN standard type B) PCN10-*S-2.54 WA WB Unit:mm BPCB mounting pattern * Part Number CL No. Number of Contacts A B PCN10-32S-2.54WA 583-0107-2 32 54.36 49.36 44.36 038.10 C D PCN10-32S-2.54WB 583-0067-0 32 54.36 49.36 44.36 038.10 PCN10-50S-2.54WB 583-0068-2 50 77.22 72.22 67.22 060.96 PCN10-64S-2.54WA 583-0109-8 64 95.00 90.00 85.00 078.74 PCN10-64S-2.54WB 583-0069-5 64 95.00 90.00 85.00 078.74 PCN10-90S-2.54WA 583-0110-7 90 128.02 123.02 118.02 111.76 PCN10-90S-2.54WB 583-0070-4 90 128.02 123.02 118.02 111.76 ■Flux Prevention Type (DIN standard type B) PCN10C-*S-2.54DSA BPCB mounting pattern Unit:mm Part Number CL No. Number of Contacts A B PCN10C-016S-2.54DSA 583-0226-1 16 34.04 29.04 24.04 017.78 C D PCN10C-020S-2.54DSA 583-0079-9 20 39.12 34.12 29.12 022.86 PCN10C-032S-2.54DSA 583-0033-8 32 54.36 49.36 44.36 038.10 PCN10C-044S-2.54DSA 583-0034-0 44 69.60 64.60 59.60 053.34 PCN10C-050S-2.54DSA 583-0035-3 50 77.22 72.22 67.22 060.96 PCN10C-064S-2.54DSA 583-0036-6 64 95.00 90.00 85.00 078.74 PCN10C-090S-2.54DSA 583-0037-9 90 128.02 123.02 118.02 111.76 PCN10C-100S-2.54DSA 583-0112-2 100 140.72 135.72 130.72 124.46 A37 ■Board Prefixed Lock Pin Type (DIN standard type B) ●Flux prevention type PCN10EA*S-2.54DSA ●The PCB mounting pattern is equivalent to PCN10-*P-2.54DSA and PCN10C-*P-2.54DSA. (Refer to catalog page A36 and A37.) Unit:mm Part Number CL No. Number of Contacts A B C D PCN10EA-020S-2.54DSA 583-0188-4 20 39.12 34.12 29.12 22.86 PCN10EA-032S-2.54DSA 583-0189-7 32 54.36 49.36 44.36 38.10 PCN10EA-044S-2.54DSA 583-0190-6 44 69.60 64.60 59.60 53.34 PCN10EA-050S-2.54DSA 583-0191-9 50 77.22 72.22 67.22 60.96 PCN10EA-064S-2.54DSA 583-0192-1 64 95.00 90.00 85.00 78.74 PCN10EA-090S-2.54DSA 583-0193-4 90 128.02 123.02 118.02 111.76 PCN10EA-100S-2.54DSA 583-0194-7 100 140.72 135.72 130.72 124.46 ■Receptacle: 2-row Straight Type (Rack installation type) PCN10D*S-2.54DSA BPCB mounting pattern Unit:mm A38 Part Number CL No. Number of Contacts A B C D PCN10D-50S-2.54DSA 583-0055-0 50 77.22 72.22 67.22 60.96 PCN10D-64S-2.54DSA 583-0056-3 64 95.00 90.00 85.00 78.74 PCN10D-90S-2.54DSA 583-0057-6 90 128.02 123.02 118.02 111.76 ■Pin Header: 3-row Right Angle Type (DIN standard type C) PCN10-*P-2.54DS BPCB mounting pattern The 48 contact type contains guide key grooves at 8 points. Unit:mm Part Number CL No. Number of Contacts A B C D E PCN10-48P-2.54DS 583-0063-9 48 53.36 47.36 44.61 38.10 48.26 PCN10-96P-2.54DS 583-0001-1 96 94.00 88.00 85.25 78.74 88.90 ■Pin Header: 3-row Right Angle Type PCN10A-*P-2.54DS BPCB mounting pattern The 48 contact type contains guide key grooves at 8 points. Unit:mm Part Number CL No. Number of Contacts A B C D E PCN10A-48P-2.54DS 583-0064-1 48 53.36 47.36 44.61 38.10 48.26 PCN10A-96P-2.54DS 583-0006-5 96 94.00 88.00 85.25 78.74 88.90 A39 ■Pin Header: Right Angle Type PCN10-64ACP-2.54DS CL583-0046-0 BPCB mounting pattern ■Pin Header: Right Angle Type PCN10A-64ACP-2.54DS CL583-0032-5 BPCB mounting pattern A40 ■Pin Header: 3-row Straight Type (DIN standard type R) PCN10-96P-2.54DSA CL583-0002-4 BPCB mounting pattern ■Pin Header: 3-row Straight Type PCN10-48P-2.54DSA CL583-0104-4 BPCB mounting pattern A41 ■Receptacle: 3-row Right Angle Type PCN10A-96S-2.54DS CL583-0027-5 BPCB mounting pattern ■Receptacle: 3-row Right Angle Type(DIN standard type R) PCN10B-96S-2.54DS CL583-0004-0 BPCB mounting pattern A42 ■Receptacle: 3-row Right Angle Type PCN10B-64ACS-2.54DS CL583-0045-7 BPCB mounting pattern ■Receptacle: 3-row Straight Type(DIN standard type C) PCN10*S-2.54DSA BPCB mounting pattern The 48 contact type contains guide key grooves at 8 points. Unit:mm * Part Number CL No. Number of Contacts A B C D PCN10-48S-2.54DSA 583-0065-4 48 54.36 50.0 44.36 38.10 PCN10-96S-2.54DSA 583-0003-7 96 95.00 90.0 85.00 78.74 PCN10-96S-2.54WA 583-0085-1 96 95.00 90.0 85.00 78.74 PCN10-96S-2.54WB 583-0071-7 96 95.00 90.0 85.00 78.74 A43 ■Receptacle: 3-row Straight Type(DIN standard type C) ●With Board prefixed lock pin PCN10EA*S-2.54DSA Note: The PCB mounting pattern is equivalent to PCN10-*S-2.54DSA. Unit:mm (Refer to catalog page A36.) Part Number CL No. Number of Contacts A B C D PCN10EA-48S-2.54DSA 583-0195-0 48 54.36 50.0 44.36 38.10 Note PCN10EA-96S-2.54DSA 583-0180-2 96 95.00 90.0 85.00 78.74 Note: Flux prevention type ■Receptacle: Straight Type PCN10-64ACS-2.54DSA CL583-0044-4 BPCB mounting pattern A44 ■Pin Header: 3-row Right Angle Type ●With Board prefixed lock pin PCN10MA-144P-2.54DS CL583-0131-7 BPCB mounting pattern ■Receptacle: 3-row Straight Type ●Board prefixed lock pin attached PCN10MA-144S-2.54DSA CL583-0130-4 BPCB mounting pattern Sequential contacts are located at 27 points up to contact No.30~38 in both rows b and c. A45 ■Pin Header: 4-row Right Angle Type PCN10-128P-2.54DS CL583-0087-7 BPCB mounting pattern ■Pin Header: 4-row Right Angle Type PCN10A-128P-2.54DS CL583-0088-0 BPCB mounting pattern A46 ■Pin Header: 4-row Straight Type PCN10-128P-2.54DSA CL583-0215-5 BPCB mounting pattern ■Receptacle: 4-row Straight Type PCN10-128S-2.54DSA BPCB mounting pattern Unit:mm Part Number CL No. Number of Contacts PCN10-128S-2.54DSA 583-0089-2 128 PCN10-128S-2.54WA 583-0090-1 128 PCN10-128S-2.54WB 583-0091-4 128 * A47 ■Receptacle: 4-row Right Angle Type PCN10B-128S-2.54DS CL583-0333-1 BPCB mounting pattern A48 ■Polarizing Key Part Number CL No. Material PCN10-GK(A) 583-0269-4 PBT, black Note: Using the polarizing key prevents connector mis-insertion in the board. Insert the polarizing key in both connectors on the receptacle side and header side. Insert the polarizing key so as to hit the mold bottom. A49 Ribbon Cable Connector Compliant with DIN Standard ■Cable Insulation displacement Connector PCN10-64S-2.54R CL583-0030-0 ■Insulation displacement Tool ●Guide plate for insulation displacement + pressing block ●Hi-Flex connection press PCN10-GPB64 CL550-0168-6 A50 Part Number CL No. Hi-Flex connection press HHP502 550-0082-2 Height Width Depth 440mm 160mm 350mm Weight 13kg Crimping Connector Compliant with DIN Standard ■3-row Type PCN10-96S-2.54C CL583-0100-3 Current rated Voltage rated 2A ( ID type 1A Crimping type AWG#26 2A AWG#28·30 1A ) 300V AC (Crimping type 200V AC) ■2-row Type PCN10-*S-2.54C Unit: mm Part Number CL No. Number of Contacts A B C D PCN10-20S-2.54C 583-0241-5 20 39.12 34.12 29.12 22.86 PCN10-64S-2.54C 583-0243-0 64 95.00 90.00 85.00 78.74 A51 ■Manual Crimping Tool ●Crimping Contact ●PCN10-2630SC (Full Gold plated) CL583-0102-9 ●PCN10-2226SC (Selective Gold plated) CL583-0216-8 ●Crimping tool ●PCN10-TA2630HC (PCN10-2230SC) CL550-0163-2 ●PCN10-TA2226HC (PCN10-2226SC) CL550-0218-2 Applicable Cable ●PCN10-2630SC: AWG#26 to #30 100pcs per bag ●PCN10-2226SC: AWG#22 to #26 100pcs per bag ■Automatic Crimping Tool Item Part Number CL No. Applicable Contact Crimping tool unit CM-105 901-0005-4 ————————— AP105-PCN10-2226S 901-3506-6 PCN10-2226SCF AP105-PCN10-2630S 901-3508-1 PCN10-2630SCF Applicator ■Contact Extraction Tool Part Number PCN10-PO A52 CL No. 550-0282-1 Circuit Protection Function Type ■Pin Header: 3-row Right Angle Type PCN10MC-96P-2.54DS CL583-0120-0 BPCB mounting pattern ■Receptacle: 3-row Straight Type PCN10MC-96S-2.54DSA CL583-0169-0 BPCB mounting pattern A53 ■Receptacle: 3-row Wrapping Type PCN10MC-96S-2.54WB CL583-0119-1 BPCB mounting pattern ■Pin Header: 2-row Right Angle Type PCN10MC-*P-2.54DS PCN10MC-*h-2.54DS BPCB mounting pattern Unit:mm A54 Part Number CL No. Number of Contacts PCN10MC-064P-2.54DS 583-0211-4 64 PCN10MC-100P-2.54DS 583-0212-7 100 A B C D 94.0 85.35 78.74 88.9 139.72 131.07 124.46 134.62 ■Receptacle: 2-row Straight Type PCN10MC-*S-2.54DSA BPCB mounting pattern Note 2: (64 contacts): The sequential contacts are located at 27 points of 1 to 4 and 26 to 32 in both rows a and b. (100 contacts): The sequential contacts are located at 22 points of 1 to 4 and 44 to 50 in both rows a and b. Unit:mm Part Number CL No. Number of Contacts PCN10MC-064S-2.54DSA 583-0213-0 64 PCN10MC-100S-2.54DSA 583-0214-2 100 A B C D 95.0 90.0 85.0 78.74 140.72 135.72 130.72 124.46 A55 Stacking Connector ■Stacking Plug BPCB mounting pattern BApplication Pattern * * * Unit: mm Part Number CL No. Number of Contacts PCN10H-16P-2.54DSA PCN10H-20P-2.54DSA PCN10H-24P-2.54DSA PCN10H-32P-2.54DSA PCN10H-44P-2.54DSA PCN10H-50P-2.54DSA PCN10HA-16P-2.54DSA PCN10HA-20P-2.54DSA PCN10HA-24P-2.54DSA PCN10HA-32P-2.54DSA PCN10HA-44P-2.54DSA PCN10HA-50P-2.54DSA PCN10HB-16P-2.54DSA PCN10HB-20P-2.54DSA PCN10HB-24P-2.54DSA PCN10HB-32P-2.54DSA PCN10HB-44P-2.54DSA PCN10HB-50P-2.54DSA PCN10HC-16P-2.54DSA PCN10HC-44P-2.54DSA PCN10HC-50P-2.54DSA PCN10HD-16P-2.54DSA PCN10HD-24P-2.54DSA PCN10HD-44P-2.54DSA PCN10HD-50P-2.54DSA 583-0227-4 583-0157-0 583-0425-8 583-0161-8 583-0164-6 583-0401-0 583-0228-7 583-0158-3 583-0426-0 583-0162-0 583-0165-9 583-0402-2 583-0229-0 583-0159-6 583-0427-3 583-0163-3 583-0166-1 583-0403-5 583-0397-4 583-0399-0 583-0404-8 583-0398-7 583-0429-9 583-0400-7 583-0405-0 16 20 24 32 44 50 16 20 24 32 44 50 16 20 24 32 44 50 16 44 50 16 24 44 50 A 37.92 43.00 48.08 58.24 73.48 81.10 37.92 43.00 48.08 58.24 73.48 81.10 37.92 43.00 48.08 58.24 73.48 81.10 37.92 73.48 81.10 37.92 48.08 73.48 81.10 Note: Please note that the above series can not mate with PCN10EA series. A56 B 33.02 38.10 43.18 53.34 68.58 76.20 33.02 38.10 43.18 53.34 68.58 76.20 33.02 38.10 43.18 53.34 68.58 76.20 33.02 68.58 76.20 33.02 43.18 68.58 76.20 C 24.39 29.47 34.55 44.71 59.95 67.57 24.39 29.47 34.55 44.71 59.95 67.57 24.39 29.47 34.55 44.71 59.95 67.57 24.39 59.95 67.57 24.39 34.55 59.95 67.57 D 17.78 22.86 27.94 38.10 53.34 60.96 17.78 22.86 27.94 38.10 53.34 60.96 17.78 22.86 27.94 38.10 53.34 60.96 17.78 53.34 60.96 17.78 27.94 53.34 60.96 E F G 29.8 3.44 35 24.8 3.36 30 19.8 3.28 25 39.8 3.30 45 34.8 4.42 40 BApplication Pattern ●Vertical Connection ' ●2-row type A64 : Mounting hole center C.L. :Center line ' ●3-row type : Mounting hole center 48 contacts: 19.09 48 contacts: 19.09 48 contacts: 17.9 C.L. :Center line A65 ' : Mounting hole center C.L. :Center line 48 contacts: 19.09 ●3-row 144 Contact type ●4-row type A66 BApplication Pattern ●Horizontal Connection ' ●2-row type : Mounting hole center C.L. :Center line ●4-row type A67 ' ●3-row type 48 contacts: 19.09 A68 : Mounting hole center C.L. :Center line BApplication Pattern ●Horizontal Connection ' ●2-row type : Mounting hole center C.L. :Center line 48 contacts: 17.9 48 contacts: 17.9 ●3-row type ●4-row type A69