0.6mm Pitch Stacking Height 3mm to 16mm Connector FX8, FX8C Series FX8 Series FX8C Series Note that FX8 series and FX8C series are not mated with each other. ■Features 1. Stacking Height 3mm to 16mm available ●Stacking Height 3,4mm-FX8 Series The board to board stacking height can correspond to 3mm~16mm. 2. SMT Coplanarity The coplanarity of the SMT solder area lead is maintained at the high accuracy of less than 0.1mm. 3,4mm 3. Mating Guide The very small and guide rib is provided, and secures ±0.6mm self-alignment, considering the mating operativity into accounts. 4. Mis-insertion Prevention The boss prevents mis-insertion in the board to cause due to the boss position and boss diameter. ●Stacking Height 5 to 16mm-FX8C Series 5. Two-piece Connection Product In order to enhance the mating reliability for the fine pitch connector using two-pieces, the two-pieces of connectors are combined by our unique method, and can secure the mount position accuracy. In such a new concept, the two-piece connected product is prepared at every number of contacts (The standard mating pitch for the two-piece interconnected product in two rows is 11mm.) ■Applications Note pc, business equipments, which require miniaturization or light-weight A226 5 to 16mm FX8 Series ■Product Specifications Rating Current rating 0.4A Operating Temperature Range -55ç to +85ç Note 1. Storage Temperature Range -10ç to +60ç Note 2. Voltage rating 100V AC Operating Humidity Range -40% to 80% Storage Humidity Range 40% to 70% Item Specification Condition 1. Insulation Resistance 1000M ohms min 250V DC 2. Withstanding voltage No flashover or insulation breakdown. 300V AC/1 minute 3. Contact Resistance 45m ohms max. 100mA 4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance: 55m ohms max.: Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle Contact resistance: 55m ohms max.: Insulation resistance: 100M ohms min. (-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes (-85ç: 30 minutes, 15 to 35ç: 2 to 3 minutes) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 55m ohms max. 50 cycles 8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Part Material Finish Remarks Insulator PBS Light brown UL94V-0 Header Contact Phosphor bronze Receptacle Contact Phosphor bronze Contact area Gold plated Lead area Tin-lead plated Contact area Gold plated Lead area ––––––– ––––––– Note : The black dots on the insulater will not affect performance. ■Ordering Information ●Single Product FX8 - 120 P - SV 1 (22) q w e q Series Name : FX8 r t t Product height variation None...Standard (Minimum low profile) w Number of Contacts :60, 80, 90, 120, 140 e Connector type 1 : +1mm y Package Form P : Header None S : Receptacle r Contact type y (21) SV : Board vertical type : Tray package product : Tube packaging product (22) : Emboss tape package product *The embossed tape packaging product is prepared for all number of contacts, except for 140 contacts. ●two-pieces Connection Product FX8 - 120/120 P 11 - SV 1 J q q Series Name w r t y u r Connector to Connector Pitch :FX8 w Number of Contacts: 60∞2, 80∞2, 90∞2, 100∞2, 120∞2, 140∞2 Example: 120/120 = 240 contacts e Connector Type : e P : Header t Contact type : SV...Board vertical type y Product height variationBlank:Standard (Minimum low profile) 1 : +1mm u J: two-pieces connection product S : Receptacle *The standard delivery packaging of the two-piece connection product is the tray packaging. A227 BStacking Height Variation ●Single Product FX8-**P-SV1 3mm 4mm FX8-**/**P11-SVJ FX8-**/**P11-SV1J 3mm 4mm FX8-**S-SV 3 to 4 FX8-**P-SV ●two-pieces Connection Product FX8-**/**S11-SVJ BMating Sectional View (The above illustration represents the stacking height 3mm type.) A228 ■Header (Single Product) ■[FX8-**P-SV] Unit: mm Part Number CL No. Number of Contacts A B C D E Tube packaging Quantity (Pieces) FX8-060P-SV(**) 578-0001-6-** 60 24.60 23.00 20.70 17.40 22.20 21 FX8-080P-SV(**) 578-0003-1-** 80 30.60 29.00 26.70 23.40 28.20 17 FX8-090P-SV(**) 578-0004-4-** 90 33.60 32.00 29.70 26.40 31.20 15 FX8-100P-SV(**) 578-0005-7-** 100 36.60 35.00 32.70 29.40 34.20 14 FX8-120P-SV(**) 578-0006-0-** 120 42.60 41.00 38.70 35.40 40.20 12 FX8-140P-SV(**) 578-0007-2-** 140 48.60 47.00 44.70 41.40 46.20 10 **None: Tray packaging product, 21: Tube packaging product, 22: Embossed tape packaging product Note 1: To order the tube packaging product, determine a quantity for delivery,multiplying the tube packaging product by an integer. Note 2: The embossed tape package product is prepared for all number of contacts, except for 140 contacts. In addition, the product will be procured by the reel unit at 1 reel = 1000 pieces. Please refer to the delivery form item on page A235 for details. ■[FX8-**P-SV1] Unit: mm Part Number CL No. Number of Contacts A B C D E Tube packaging Quantity (Pieces) FX8-060P-SV1(**) 578-0041-0-** 60 24.60 23.00 20.70 17.40 22.20 21 FX8-080P-SV1(**) 578-0043-6-** 80 30.60 29.00 26.70 23.40 28.20 17 FX8-090P-SV1(**) 578-0044-9-** 90 33.60 32.00 29.70 26.40 31.20 15 FX8-100P-SV1(**) 578-0045-1-** 100 36.60 35.00 32.70 29.40 34.20 14 FX8-120P-SV1(**) 578-0046-4-** 120 42.60 41.00 38.70 35.40 40.20 12 FX8-140P-SV1(**) 578-0047-7-** 140 48.60 47.00 44.70 41.40 46.20 10 **None: Tray packaging product, 21: Tube packaging product, 22: Embossed tape packaging product Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube package product by an integer. Note 2: The embossed tape package product is prepared for the entire number of contacts, except for 140 contacts. In addition, the product will be sold by the reel unit when 1 reel = 1000 pieces. Please refer to the delivery form item on page A235 for details. A229 ■Receptacle (Single Product) ■[FX8-**S-SV] Unit: mm Part Number CL No. Number of Contacts A B C D E Tube packaging Quantity (Pieces) FX8-060S-SV(**) 578-0201-5-** 60 24.60 23.05 20.80 17.40 22.20 21 FX8-080S-SV(**) 578-0203-0-** 80 30.60 29.05 26.80 23.40 28.20 17 FX8-090S-SV(**) 578-0204-3-** 90 33.60 32.05 29.80 26.40 31.20 15 FX8-100S-SV(**) 578-0205-6-** 100 36.60 35.05 32.80 29.40 34.20 14 FX8-120S-SV(**) 578-0206-9-** 120 42.60 41.05 38.80 35.40 40.20 12 FX8-140S-SV(**) 578-0207-1-** 140 48.60 47.05 44.80 41.40 46.20 10 **None: Tray packaging product, 21: Tube packaging product, 22: Embossed tape packageing product Note 1: To order the tube packaging product, determine a quantity for delivery,multiplying the tube packaging product by an integer. Note 2: 0The embossed tape package product is prepared for the entire number of contacts, except for 140 contacts. In addition, the product will be sold per reel when 1 reel = 1000 pieces. Please refer to the delivery form item on page A235 for details. BPCB mounting pattern Header A230 Receptacle ■Header (Two-piece Connection Product) ■[FX8-**/**P11-SVJ] Unit: mm Part Number CL No. Number of Contacts A B C D E F FX8-060/060P11-SVJ 578-0101-0 60∞2 31.70 24.70 23.00 20.70 17.40 22.20 FX8-080/080P11-SVJ 578-0103-6 80∞2 37.70 30.70 29.00 26.70 23.40 28.20 FX8-090/090P11-SVJ 578-0104-9 90∞2 40.70 33.70 32.00 29.70 26.40 31.20 FX8-100/100P11-SVJ 578-0105-1 100∞2 43.70 36.70 35.00 32.70 29.40 34.20 FX8-120/120P11-SVJ 578-0106-4 120∞2 49.70 42.70 41.00 38.70 35.40 40.20 FX8-140/140P11-SVJ 578-0107-7 140∞2 55.70 48.70 47.00 44.70 41.40 46.20 Note : The two-piece connection product is packaged by tray. ■[FX8-**/**P11-SVJ1J] Unit: mm Part Number CL No. Number of Contacts A B C D E F FX8-060/060P11-SV1J 578-0141-5 60∞2 31.70 24.70 23.00 20.70 17.40 22.20 FX8-080/080P11-SV1J 578-0143-0 80∞2 37.70 30.70 29.00 26.70 23.40 28.20 FX8-090/090P11-SV1J 578-0144-3 90∞2 40.70 33.70 32.00 29.70 26.40 31.20 FX8-100/100P11-SV1J 578-0145-6 100∞2 43.70 36.70 35.00 32.70 29.40 34.20 FX8-120/120P11-SV1J 578-0146-9 120∞2 49.70 42.70 41.00 38.70 35.40 40.20 FX8-140/140P11-SV1J 578-0147-1 140∞2 55.70 48.70 47.00 44.70 41.40 46.20 Note : The two-piece product is packaged by tray. A231 ■Receptacle (two-piece Connection Product) ■[FX8-**/**P11-SVJ] Unit: mm Part Number CL No. Number of Contacts A B C D E F FX8-060/060S11-SVJ 578-0301-0 60∞2 31.70 24.60 23.05 20.80 17.40 22.20 FX8-080/080S11-SVJ 578-0303-5 80∞2 37.70 30.60 29.05 26.80 23.40 28.20 FX8-090/090S11-SVJ 578-0304-8 90∞2 40.70 33.60 32.05 29.80 26.40 31.20 FX8-100/100S11-SVJ 578-0305-0 100∞2 43.70 36.60 35.05 32.80 29.40 34.20 FX8-120/120S11-SVJ 578-0306-3 120∞2 49.70 42.60 41.05 38.80 35.40 40.20 FX8-140/140S11-SVJ 578-0307-6 140∞2 55.70 48.60 47.05 44.80 41.40 46.20 Note 1: The two-piece connection product is packaged by tray. BPCB mounting pattern Header A232 Receptacle BDetailed Figure After Joint Removal (two-piece Connection Product) Header Receptacle A233 BConnector Precautions for use 1. Tolerance Clearance on Mating Side The effective contact length of the product is set to 0.7mm. Please use the product so as to set the clearance to less than 0.2mm between the header and the receptacle in the mating process. 2. Fixation between Mounting Boards The very low profile and compact product, so never fix the connector between boards by mating force only 3. Stacking Height Tolerance for Mating Stack 3mm 3 +0.3 _0.2 mm Stack 4mm 4 +0.3 _0.2 mm Note: Please Note that the above stacking tolerance doesn't include the solder paste thickness. 4. Handling two-piece connection Product Both joint bars of the two-piece connection product are fixed by the joint members, but the mating cannot be implemented in that state. Before mating, remove the joint bars as if pull it up. (Don't remove the joint members, before mounting on the board.) Before removing joint bar After removing joint bar 5. Mounting Temperature Profile (Reference) Applicable Conditions Reflow system :IR reflow Solder :Paste type 63 Sn/37 Pb Test board :Glass epoxy 161mm x 100mm x 1.6 mm Metal mask thickness :0.15 mm (Flux content 11 wt%) Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount. A234 BPackaging Type Packaging Type Number of contacts Product Pieces Tube packaging 21 pieces 17 pieces 15 pieces 14 pieces 12pieces Unit Packaged Sales Deliver multiplying product pieces (60 contacts: 21, 42...) Tube Total Length 550mm±2mm Tape Width Embossed Tape Packaging 60 contacts 80 contacts 90contacts 100 contacts 120 contacts 140 contacts 44mm 44mm 44mm 56mm 56mm Product Pitch 12mm Emboss Reel Diameter Refer to the table on catalog page A236. Product Pieces 1000 pieces per reel Unit Packaged Sales Per reel 10pieces 72mm *The above packaging describes about the single product only. In addition, the packaging of the two-piece connection product is packaged by tray. BPackaging Specification [Tube packaging] ●Header [FX8-**P-SV (21)] [FX8-**P-SV1 (21)] ●Receptacle [FX8-**S-SV (21)] A235 [Embossed Tape Package] [52.4] [56] [26.2] ●Embossed Carrier Tape Dimensions *The above pattern represents the receptacle connector case. Unit: mm P/S Header Product No. FX8-**P-SV (22) A B 5.5 7.9 FX8-**P-SV1 (22) Receptacle FX8-**S-SV (22) C 8.4 E 3.2 4.2 6.0 D Ø 330 12 2.6 Ø 360 Ø 330 ** : Number of Contacts ●Reel Dimensions (FREE) [58] A236