NEW MIL Standard SMP Compatible Push-on Lock Coaxial Connectors PO40G Series ■Overview Continuing demand for higher transmission speeds in the communication systems created a need for development of high reliability small coaxial cable/connector systems. Drawing on it’s extensive experience in the development and manufacturing of coaxial connectors, Hirose Electric has developed PO40G line of connectors, capable of fulfilling this need. ■Features 1. Supports 18 GHz High quality and manufacturing standards assure high performance levels for frequencies of up to 18 GHz. Contact nearest HRS office if higher frequencies coaxial connector of the same configuration are needed. 2.High mated retention forces The built-in locking mechanism assures secure plug / receptacle retention force, needed for high frequency performance. 3.Compatible with MIL standard SMP ■Applications Communication equipment, transmission stations, measurement and instrumentation devices, medical diagnostic stations. ■Mating Diagrams Jack Side ■ Straight PO40G-J-*** Plug Side ■ PCB edge mount plug receptacle PO40G-LPR (LD) -SMT ■ Right-angle PO40G-LJ-*** ■ Conversion adapter PO40G plug -- SMA plug HRMP-PO40GP-18G ■ In-line adapter (jack to jack) PO40G-A-JJ-645 ■ Conversion adapters PO40G jack -- SMA jack HRMJ-PO40GJ-*** 2004.6 1 ■Product Specifications Nominal characteristic impedance: 50ohms Frequency range: DC to 18GHz Ratings Item Operating temperature range: - 50ç to +125ç Operating humidity: 95% max. Specification 1. Contact resistance Center : 6 m ohms max. Outer : 6 m ohms max. Conditions 100 mA max. 2. Insulation resistance 1000 M ø min. 500 V DC 3. Withstanding voltage No flashover or insulation breakdown. 500 V AC / 1 minute 4. Return loss 20dB min. DC to 18GHz 5. Center contact holding force 0.2N min. Measured with a 0.35 dia. gauge 6. Durability (mating/un-mating, with corresponding plug) Contact resistance Center : 12 m ohms max. 500 cycles 7. Humidity Outer : 12 m ohms max. Insulation resistance: 100 M ohms min. (high humidity) 240 hours (10 cycles) at temperature of 10ç to 65ç, Insulation resistance: 1000 M ohms min. (dry) RH 90% to 98% 8. Temperature cycle No damage, cracks or parts dislocation. Temperature: - 65ç ➝ +125ç Time: 30 ➝ 30 (Minutes) 5cycles 9. Salt spray test No corrosion 5% salt water solution, 48 hours ■Material and Finishes Part Shell Center contact Material Plug external spring portion Beryllium copper Gold plated Receptacle, shell body, remaining components Stainless steel Gold plated, passivated Pin Phosphor bronze Gold plated Socket Beryllium copper Gold plated PTFE (Polytetrafluoroethylene) Color: White Insulator ■Ordering information PO40G 1 1 Series name : PO40G 2 Connector type J : Straight jack LJ : Right-angle jack LPR : PCB edge mount plug receptacle A : In-line adapter 3 Cable type or terminal type 119 : 0.047 in. outer dia. semi-flexible cable 219 : 0.085 in. outer dia. semi-flexible cable SMT : SMT type 2 Finish 3 ■Typical Data 0 -0.5 -1 Return Loss (dB) 0 10 20 30 40 50 60 2 0 5 10 Frequency (GHz) 15 20 Insertion Loss (dB) PO40G-J-219 double ended coaxial cable (100mm) 0.085 inch outer dia. semi-flexible cable ■Straight Jack (DC to 15 GHz: Return Loss 20dB min.) Ø3.4 PO40G-J-119 Ø3.4 PO40G-J-219 6.4 6.4 Part Number Cable type PO40G-J-119 0.047 inch outer dia. semi-flexible cable PO40G-J-219 0.085 inch outer dia. semi-flexible cable * Sold only as complete cable assemblies. ■Right-angle Jack (DC to 10 GHz: Return Loss 20dB min.) 5.3 Ø4.8 PO40G-LJ-119 Ø4.8 PO40G-LJ-219 5.3 6.7 6.7 Part Number Cable type PO40G-LJ-119 0.047 inch outer dia. semi-flexible cable PO40G-LJ-219 0.085 inch outer dia. semi-flexible cable * Sold only as complete cable assemblies. ■PCB edge mount plug receptacle 6.5 4.2 4 Ø5 Ø0.65 4.5 0.35 Note: Mating side -- LIMITED DETENT Part Number CL No. PO40G-LPR(LD)-SMT CL338-0315-9 Ø3.4 ■In-line Adapter (Jack to Jack) 6.45 Part Number CL No. PO40G-A-JJ-645 CL338-0310-5 3 ■Conversion Adapters ●SMA conversion adapter launcher type (Mating portion: PO40G jack - SMA jack) 1/4-36UNS-2A CL No. HRMJ-PO40GJ-BPA CL311-0372-3 Ø6.3 8.35 Part Number 17 ●SMA conversion adapter (Mating portion: PO40G jack - SMA jack) Ø6.6 1/4-36UNS-2A Part Number CL No. HRMJ-PO40GJ-18G CL311-0370-8 14.3 ●SMA conversion adapter (Mating portion: PO40G plug - SMA plug) 1/4-36UNS-2A 8HEX Note: Mating side -- LIMITED DETENT 14.5 2.97 Part Number CL No. HRMP-PO40GP-18G CL311-0371-0 ■Connector extraction tools Sold separately Connector Part Number Applicable Tool Part Number CL No. Notes PO40G-J-N1 CL350-0142-6 Photo (1) *PO40G-J-N1 CL350-0142-6 Photo (2) *PO40G-J-N2 CL350-0143-9 Note: Both tools are required. PO40G-LJ-*** PO40G-J-*** Right-angle Jack (PO40G-LJ-***) PO40G-J-N1 Extraction tool Photo (1) Straight Jack (PO40G-J-***) PO40G-J-N1(Rear) Extraction tool Photo (2) Note 1: After initial release with the tool the connector can be removed with hand. Note 2: The extraction tools must be used only with specified Hirose Electric connectors. 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 4 PO40G-J-N2(Front) Extraction tool