NEW 2mm Hard Metric Coaxial Connector PO21M, PO51M, PO82M Series (IEC 61076-4-101 Compliant) Photo 1 ■Summary P021M, PO51M, and P082M connector series are a plug-in type coaxial contact and an applicable housing case compliant with the 2mm hard metric standard (IEC 61076-4-101). PO21M series: Housing PO51M series: 50ø coaxial contact PO82M series: 75ø coaxial contact Mounted on the same board as the 2mm hard metric connector ■Features 1. Profile complies with 2mm hard metric This connector can be mounted on the same board as the hard metric connector. (Refer to Photos 1 and 2.) It uses Compact-PCI designated key options to identify a 3.3V or 5V system. (Hirose’s MU optical fiber series can also be mounted on the same board as the 2mm electric system connector. Refer to Photo 1) Photo 2 ●50 ø type (PO51M series) 2. Flexible Design allows for various terminations The housing (P021M series) allows for both cable mount as well as board mounted connectors. The back plane side allows both a 50ø and a 75ø straight jack as well as a right angle 50ø jack. The daughter card side allows both a 50ø and a 75ø straight plug as well as a right angle 50ø board mounted jack. 3. 50ø type and 75ø type Hirose’s unique technology assures that the high frequency characteristics of the 50ø impedance type (P051M) and 75ø impedance type (P082M) are consistent between the fully mated position and a mated position with a 1mm gap. Note: The P082M connector opening is designed in the HRS original form in order to enhance high frequency characteristics. ●75 ø type (PO82M series) ■Applications ● Base Station ● Digital and Analog Switch Equipment ● Digital Broadcasting Equipment ● Test & Measurement Equipment ● Factory Control & Automation Equipment 2001.6 1 ■Specification PO51M Item PO82M Standard/Condition Standard/Condition Characteristic Impedance 50ø 75ø Voltage Standing Wave Ratio 0~3GHz V.S.W.R.1.2 max. 0~2GHz V.S.W.R.1.2 max. Insulation Resistance 1000Mø/500V DC 1000Mø/500V DC Withstand Voltage Contact Resistance 750V AC for one minute 750V AC for one minute Inner : 6mø max. · Outer : 3mø max. Inner : 11mø max. · Outer : 3mø max. Material Finish ■Materials Part Housing PBT –––– Outer Conductor Brass, phosphor bronze Gold plating Inner Conductor Phosphor bronze, beryllium bronze Gold plating PTFE –––– Insulator ■Product Configuration Cable to the Backplane Daughter Card Side Housing Backplane : PO21M series (PO21M-*S-*) Impedance 50ø type coaxial connector PO51M series Jack (PO51M-J-*) Right Angle Cable Jack (PO51M-LJ-*) Impedance 75ø type coaxial connector PO82M series (Hirose original) 2 Jack (PO82M-J-*) (PO21M-*P-*) Plug (PO51M-P-*) Right Angle PCB plug receptacle (PO51M-LPR-*) Plug(PO82M-P-*) Housing - PO21M series ■Daughter Card Side: Coaxial 6-contact housing (IEC 61076-4-101 Compliant) PBT 49.95 7.5 7.5 3.2 20.7 7.3 6.25 2 6 10 16 20 24 3.7 6.25 11.4 7.5 12.25 7.5 3.7 12.8 6 BRecommended PCB Layout (Component Side) 7.5 6.25 6.25 7.5 7.5 2.5 Note 1 The board hole pitch tolerance should be ±0.05mm. 2 The 30-Ø1.3 hole is needed to combine and use coaxial connector PO51M-LPR-PC-1A. 6 ot hr .1 +0 0 dt .05 +0 0 ote 2 Pl ed 2 ou ) gh 1.3 ugh o thr -Ø lot Ø 8- (N 30 (P 3.5 2.5 2 2.5 2.5 7.5 ) Product No. HRS No. Remark PO21M-6P-SA CL330-0305-4 Compliant to IEC = Style L 3 ■Daughter Card Side: Coaxial 6-contact housing (Nut Insert for Board Mounting) PBT 49.95 A 7.5 7.5 3.2 20.7 7.3 6.25 2 6 10 16 20 24 3.7 6.25 11.4 7.5 12.25 7.5 3.7 A 12.8 5.1 AA 2.1 M2 M2 BRecommended PCB Layout (Component Side) 6.25 7.5 6.25 7.5 7.5 2.5 Note 1 The board hole pitch tolerance should be ±0.05mm. 2 The 30-Ø1.3 hole is needed to combine and use coaxial connector PO51M-LPR-PC-1A. 6 3.5 2.5 2 2.5 2.5 7.5 +0 .1 .1 +0 0 ) gh ou thr .3 Ø1 ed 0 ) gh .2 ou Ø2 thr 2ted Plo ot (N 30 lot (P 2 4 (N 6- ot Pl ot Ø2 ed th +0 0 .05 ro ug h) Product No. HRS No. Remark PO21M-6P-SA-S CL330-0306-7 Nut insert product for mounting board ■Backplane Cable Side: Coaxial 6-contact housing 49.95 0.55 0.4 B 3.75 3.75 3.75 3.75 15.4 3 2 24 7.5 PBT 7.5 20 6.25 10 6.25 16 7.5 6 2 7.5 B 3.5 4 3 13.45 A A 5.5 AA (PO21M-6S-PA-S) 4.5 (PO21M-6S-PA) AA 2 Ø5.1 M2.5 BRecommended PCB Layout (Component Side) 5 .0 +0 0 7.5 6.25 6.25 7.5 7.5 2 o (N 5 5.5 4.5 7.5 Note 1 The board hole pitch tolerance should be ±0.05mm. 2 The 4-Ø2.6 hole is needed to use and fix this product on the board by screws. h) ug 2 hro -Ø ed t .1 11 t plat +0 0 ugh) o .1 thro (N Ø6 ted 6- t pla Connector center line 43.75 3.75 3.75 3.75 (N ot Ø2 .6 +0 pla 0 .1 te d th 2 ro ug h) Product No. HRS No. Remark PO21M-6S-PA CL330-0300-0 Compliant to IEC = Style L PO21M-6S-PA-S CL330-0301-3 Nut insert product for mounting board * * The above pattern shows a layout for PO21M-6S-PA. PO21M-6-PA-S needs 2 screws (M2.5) to be inserted in area #2 as shown above. 5 ■Coding Key These IEC 61076-4-101 compliant keys distinguish between daughter cards with 3.3V or 5V as specified by Compact-PCI. These keys are installed into the PO21M-6S and PO21M-6P type housings to prevent mis-mating. ● Product Corresponding to Compact PCI 3.3V (Yellow) Product No. HRS No. Type Applicable Connector PCN-21-P-CK (A) CL643-0039-3 3456 PO21M-6S type housing PCN-21-S-CK (A) CL643-0037-8 1278 PO21M-6P type housing ●Product Corresponding to Compact PCI 5V (Blue) 6 Product No. HRS No. Type Applicable Connector PCN-21-P-CK (B) CL643-0040-2 1567 PO21M-6S type housing PCN-21-S-CK (B) CL643-0038-0 2348 PO21M-6P type housing 50ø Impedance Coaxial Connector – PO51M Series ■Inline Cable Plug HRS No. 18.9 Applicable Cable PO51M-P-1.5W CL330-0320-8 1.5D-HQEW, Each kind of 1.5D-2W type cable PO51M-P-1.5W CL330-0321-0 1.5D-HQEV, Each kind of 1.5D-2V type cable 11.5 Ø5.7 Product No. HRS No. CL330-0315-8 5.7 5.7 11.5 3.2 Product No. PO51M-LPR-PC-1A 10 ■Right Angle PCB Receptacle BRecommended PCB Layout (Component Side) 4-M 0.6 .1 +0 0 5±0.05 2.5±0.05 Ø 3 1. 2.5±0.05 5±0.05 ■Inline Cable Jack 18.9 HRS No. Applicable Cable PO51M-J-1.5W CL330-0330-1 1.5D-HQEW, Each kind of 1.5D-2W type cable PO51M-J-1.5W CL330-0331-4 1.5D-HQEV, Each kind of 1.5D-2V type cable 11.7 Ø5.7 Product No. ■Right Angle Cable Jack 22.1 CL330-0340-5 1.5D-HQEW, Each kind of 1.5D-2W type cable PO51M-LJ-1.5 CL330-0341-8 1.5D-HQEV, Each kind of 1.5D-2V type cable PO51M-LJ-178-1 CL330-0343-3 RG-178B/U 13.9 PO51M-LJ-1.5W M 5.7 Applicable Cable 11.7 PO51M-LJ-1.5W PO51M-LJ-1.5 22.1 7.55 14.2 HRS No. M 5.7 Product No. 7.55 11.7 PO51M-LJ-178-1 7 75ø Impedance Coaxial Connector – PO82M Series ■Inline Cable Plug 18.9 HRS No. Applicable Cable PO82M-P-1.5C CL330-0350-9 1.5C-QEV, Each kind of 1.5C-2V type cable 11.5 Ø5.7 Product No. ■Inline Cable Jack 18.9 HRS No. Applicable Cable PO82M-J-1.5C CL330-0351-1 1.5C-QEV, Each kind of 1.5C-2V type cable 11.7 Ø5.7 Product No. ■ Extraction Jig 8 Product No. HRS No. PO51M, PO82M Plug Jig PO51MP-T-1 CL350-0137-6 PO51M, PJ82M Jack Jig (Common to PO51, PO72 Jack Jig) PO51J-T-1 CL350-0038-4 BMating Condition The mating condition is shown as follows. ● Slant Mating ±2 ● Lateral and Longitudinal Mating ±2 ± 2° ± 2° 9 BUsage ● Example of 50ø Impedance Type (PO51M) in Combination SMB economic product One touch full rock PO51M series POD1 series Ø7.6 8.6 N.UM (P) series ● Example of 75ø Impedance Type (PO82M) in Combination 75ø high precise aligned ● Example of Custom Development (Mid plane Application) 10 BNC(75) series Ø13 PO82M series 7.65 PL71 series 11 12