Revised December 2001 74ALVC86 Low Voltage Quad 2-Input Exclusive-OR Gate with 3.6V Tolerant Inputs and Outputs General Description Features The ALVC86 contains four 2-input exclusive OR gates. This product is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V ■ 3.6V tolerant inputs and outputs The 74ALVC86 is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation. ■ 1.65V to 3.6V VCC supply operation ■ tPD 3.5 ns max for 3.0V to 3.6V VCC 4.4 ns max for 2.3V to 2.7V VCC 7.8 ns max for 1.65V to 1.95V VCC ■ Power-off high impedance inputs and outputs ■ Uses patented Quiet Series noise/EMI reduction circuitry ■ Latchup conforms to JEDEC JED78 ■ ESD performance: Human body model > 2000V Machine model > 250V Ordering Code: Order Number Package Number 74ALVC86M 74ALVC86MTC M14A MTC14 Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names Description An , Bn Inputs On Outputs Quiet Series is a trademark of Fairchild Semiconductor Corporation © 2001 Fairchild Semiconductor Corporation ds500718 www.fairchildsemi.com 74ALVC86 Low Voltage Quad 2-Input Exclusive-OR Gate with 3.6V Tolerant Inputs and Outputs December 2001 74ALVC86 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 3) −0.5V to +4.6V Supply Voltage (VCC) −0.5V to 4.6V DC Input Voltage (VI) Output Voltage (VO) (Note 2) Power Supply −0.5V to VCC +0.5V Operating DC Input Diode Current (IIK) VI < 0V −50 mA 0V to VCC Output Voltage (VO) DC Output Diode Current (IOK) 0V to VCC Free Air Operating Temperature (TA) VO < 0V −50 mA −40°C to +85°C Minimum Input Edge Rate (∆t/∆V) VIN = 0.8V to 2.0V, VCC = 3.0V DC Output Source/Sink Current ±50 mA (IOH/IOL) ±100 mA Supply Pin (I CC or GND) 10 ns/V Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. DC VCC or GND Current per Storage Temperature Range (TSTG) 1.65V to 3.6V Input Voltage (VI) −65°C to +150°C Note 2: IO Absolute Maximum Rating must be observed. Note 3: Floating or unused inputs must be held HIGH or LOW. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage IOH = −100 µA VCC (V) Min 1.65 -1.95 0.65 x VCC 2.3 - 2.7 1.7 2.7 - 3.6 2.0 Max V 1.65 -1.95 0.35 x VCC 2.3 - 2.7 0.7 2.7 - 3.6 0.8 1.65 - 3.6 VCC - 0.2 IOH = −4 mA 1.65 1.2 IOH = −6 mA 2.3 2 IOH = −12 mA 2.3 1.7 2.7 2.2 V V 3.0 2.4 IOH = −24 mA 3.0 2 IOL = 100 µA 1.65 - 3.6 0.2 1.65 0.45 IOL = 6 mA 2.3 0.4 IOL = 12mA 2.3 0.7 IOL = 4 mA Units 2.7 0.4 IOL = 24 mA 3 0.55 V II Input Leakage Current 0 ≤ VI ≤ 3.6V 3.6 ±5.0 µA IOZ 3-STATE Output Leakage 0 ≤ VO ≤ 3.6V 3.6 ±10 µA ICC Quiescent Supply Current VI = VCC or GND, IO = 0 3.6 40 µA ∆ICC Increase in ICC per Input VIH = VCC − 0.6V 3 -3.6 750 µA www.fairchildsemi.com 2 T A = −40°C to +85°C, RL = 500Ω Symbol tPHL, tPLH CL = 50 pF Parameter V CC = 3.3V ± 0.3V Propagation Delay Bus to Bus CL = 30 pF V CC = 2.7V V CC = 2.5V ± 0.2V V CC = 1.8V ± 0.15V Min Max Min Max Min Max Min Max 1.1 3.5 1.3 4.4 0.8 3.9 1.0 7.8 Units ns Capacitance Symbol Parameter TA = +25°C Conditions VCC Typical Units CIN Input Capacitance VI = 0V or VCC 3.3 6 pF COUT Output Capacitance VI = 0V or VCC 3.3 7 pF CPD Power Dissipation Capacitance 3.3 20 2.5 20 Outputs Enabled f = 10 MHz, CL = 50 pF pF AC Loading and Waveforms TABLE 1. Values for Figure 1 TEST SWITCH tPLH,tPHL Open FIGURE 1. AC Test Circuit TABLE 2. Variable Matrix (Input Characteristics: f = 1MHz; tr = tf = 2ns; Z0 = 50Ω Symbol VCC 3.3V ± 0.3V 2.7V 2.5V ± 0.2V 1.8V ± 0.15V Vmi 1.5V 1.5V VCC /2 VCC/2 Vmo 1.5V 1.5V VCC /2 VCC/2 FIGURE 2. Waveform for Inverting and Non-inverting Functions 3 www.fairchildsemi.com 74ALVC86 AC Electrical Characteristics 74ALVC86 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A www.fairchildsemi.com 4 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 5 www.fairchildsemi.com 74ALVC86 Low Voltage Quad 2-Input Exclusive-OR Gate with 3.6V Tolerant Inputs and Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued)