MCC Features • • • • High Forward Surge Capability Ideal for printed circuit boards High Temperature Soldering: 250oC for 10 seconds Reliable low cost construction utilizing molded plastic technique Maximum Ratings • • • HDBS101G THRU HDBS107G omponents 21201 Itasca Street Chatsworth !"# $ % !"# 1.0 AMP. Glass Passivated Bridge High Efficient Rectifier 50 to 1000 Volts Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C For Capacitive Load, Derate Current by 20% MCC Part Number HDBS101G HDBS102G HDBS103G HDBS104G HDBS105G HDBS106G HDBS107G Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V SDB-1 B Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V IF(AV) IFSM VF 1.0 A 50A 1.0V 1.3V 1.7V IFM = 1.0A; TC = 25°C C Notch in Case A G E H DIMENSIONS TC = 40°C 8.3ms, half sine TJ=150oC D K Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage HDBS101G-103G HDBS104G HDBS105G-107G Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time HDBS101G-104G HDBS105G-107G + ∼ ∼ DIM A B C D E G H K INCHES MIN MAX .320 .335 .245 .255 .040 .060 .386 .404 .120 .130 .003 .013 .195 .205 .040 .047 MM MIN 8.13 6.20 1.02 9.80 3.05 0.076 5.00 1.02 MAX 8.50 6.50 1.52 10.3 3.30 0.33 5.20 1.20 NOTE TYP Suggested Solder Pad Layout .047” IR 5.0µA 500uA TC = 25°C TC = 125°C .344” .060” Trr 50ns 75ns IF=0.5A, IR=1.0A, Irr=0.25A .205” www.mccsemi.com Version: 3 2003/01/30 MCC HDBS101G thru HDBS107G FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 10W NONINDUCTIVE 50W NONINDUCTIVE trr 1.0 +0.5A PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) .06" (1.5mm) AVERAGE FORWARD CURRENT. (A) (+) 50Vdc (approx) (-) (-) DUT 0 -0.25A (+) PCB 0.5 60Hz RESISTIVE OR INDUCTIVE LOAD -1.0A NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms 0 1cm FIG.3- TYPICAL REVERSE CHARACTERISTICS Copper Pauls .51" x .51" (13mm x 13mm) 20 40 60 80 100 120 140 150 o AMBIENT TEMPERATURE. ( C) SET TIME BASE FOR 5/ 10ns/ cm FIG.4- TYPICAL FORWARD CHARACTERISTICS 10 1.0 0.1 Tj=25 0C 0 20 40 60 80 100 .2 25 20 15 10 5 10 20 NUMBER OF CYCLES AT 60Hz G~ HD BS 1 06 BS 10 5G HD BS 1 07 G BS1 1.2 1.4 70 JUNCTION CAPACITANCE.(pF) PEAK FORWARD SURGE CURRENT. (A) 8.3ms Single Half Sine Wave JEDEC Method 2 1.0 FIG.6- TYPICAL JUNCTION CAPACITANCE 35 1 ~HD .4 FORWARD VOLTAGE. (V) FIG.5- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 0 .8 0.01 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 30 .6 0.1 0.001 120 HD 10 01G Tj=125 0C Tj=25 0C 1.0 BS1 100 HD INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) 04G 1000 50 100 60 50 40 HD B S1 01G ~HD BS1 HDB S10 05G 6G~ HDB S10 7G 30 20 10 0 .1 .5 1 2 5 Tj=25 0C 10 20 50 100 200 500 REVERSE VOLTAGE. (V) www.mccsemi.com Version: 3 2003/01/30