DUAL DIFFERENTIAL PECL-to-TTL TRANSLATOR DESCRIPTION FEATURES ■ ■ ■ ■ ■ ■ ClockWorks™ SY10ELT23 SY100ELT23 3.0ns typical propagation delay <500ps typical output-to-output skew Differential PECL inputs 24mA TTL outputs Flow-through pinouts Available in 8-pin SOIC package The SY10/100ELT23 are dual differential PECL-to-TTL translators. Because PECL (Positive ECL) levels are used, only +5V and ground are required. The small outline 8-lead SOIC package and the low skew dual gate design of the ELT23 makes it ideal for applications which require the translation of a clock and a data signal. The ELT23 is available in both ECL standards: the 10ELT is compatible with positive ECL 10H logic levels, while the 100ELT is compatible with positive ECL 100K logic levels. PIN NAMES PIN CONFIGURATION/BLOCK DIAGRAM Pin D0 1 8 VCC D0 2 7 Q0 PECL TTL D1 3 6 Q1 D1 4 5 GND Function Qn TTL Outputs Dn Differential PECL Inputs VCC +5.0V Supply GND Ground SOIC TOP VIEW Rev.: G 1 Amendment: 0 Issue Date: December 1999 ClockWorks™ SY10ELT23 SY100ELT23 Micrel ABSOLUTE MAXIMUM RATINGS(1) Symbol TRUTH TABLE Value Unit D D Q –0.5 to +7.0 V L H L 0V to VCC+0.5 V H L H Open Open L Paramter VCC Power Supply Voltage VI PECL Input Voltage VO Voltage Applied to Output at HIGH State –0.5 to +5.5 V IO Current Applied to Output at LOW State Twice the Rated IOL mA Tstore Storage Temperature –65 to +150 °C TA Operating Temperature –40 to +85 °C NOTE: 1. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM RATlNG conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40°C Symbol ICC Parameter Power Supply Current NOTE: 1. Parametric values specified at: TA = +25°C TA = +85°C Min. Max. Min. TA = 0°C Max. Min. Max. Min. Max. Unit Condition — 30 — 30 — 30 — 30 mA — 5 volt Power Supply Range 100ELT23 Series: 10ELT23 Series +4.5V to +5.5V. +4.75V to +5.5V. AC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition tPLH tPHL Propagation Delay D to Output Q 2.5 3.5 2.5 3.5 2.5 3.5 2.5 3.5 ns CL = 50pF tskpp Part-to-Part Skew(2,5) — 0.5 — 0.5 — 0.5 — 0.5 ns CL = 50pF tskew++ Within-Device Skew(3,5) — 0.3 — 0.3 — 0.3 — 0.3 ns CL = 50pF tskew– – Within-Device Skew(4,5) — 0.3 — 0.3 — 0.3 — 0.3 ns CL = 50pF tr tf Output Rise/Fall Time 1.0V to 2.0V — 1.5 — 1.5 — 1.5 — 1.5 ns CL = 50pF fMAX Maximum Input Frequency(5) 160 — 160 — 160 — 160 — MHz CL = 50pF NOTES: 1. Parametric values specified at: 2. 3. 4. 5. 5 volt Power Supply Range 100ELT23 Series: 10ELT23 Series Device-to-Device Skew considering HIGH-to-HIGH transitions at common VCC level. Within-Device Skew considering HIGH-to-HIGH transitions at common VCC level. Within-Device Skew considering LOW-to-LOW transitions at common VCC level. These parameters are guaranteed but not tested. 2 +4.5V to +5.5V. +4.75V to +5.5V. ClockWorks™ SY10ELT23 SY100ELT23 Micrel TTL DC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition VOH Output HIGH Voltage 2.5 2.0 — — 2.5 2.0 — — 2.5 2.0 — — 2.5 2.0 — — V V IOH = –3.0mA IOH = –15mA VOL Output LOW Voltage — 0.5 — 0.5 — 0.5 — 0.5 V IOL = 24mA IOS Output Short Circuit Current –80 –200 –80 –200 –80 –200 –80 –200 mA VOUT = 0V NOTE: 1. Parametric values specified at: 5 volt Power Supply Range 100ELT23 Series: 10ELT23 Series +4.5V to +5.5V. +4.75V to +5.5V. PECL DC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40°C Symbol Parameter TA = 0°C Min. Typ. Max. TA = +25°C Min. Typ. Max. TA = +85°C Min. Typ. Max. Min. Typ. Max. Unit IIH Input HIGH Current — — 150 — — 150 — — 150 — — 150 µA IIL Input HIGH Current 0.5 — — 0.5 — — 0.5 — — 0.5 — — µA VCMR Common Mode Range 2.2 — VCC 2.2 — VCC 2.2 — VCC 2.2 — VCC V VPP Minimum Peak-to-Peak Input(2) 200 — — 200 — — 200 — — 200 — — VIH Input HIGH Voltage(3) 10ELT 3770 100ELT 3835 — — 4110 4120 3830 3835 — — 4160 4120 3870 3835 — — 4190 4120 3940 3835 — — 4280 4120 Input LOW Voltage(3) 10ELT 3050 100ELT 3190 — — 3500 3525 3050 3190 — — 3520 3525 3050 3190 — — 3520 3525 3050 3190 — — 3555 3525 VIL NOTES: 1. Parametric values specified at: mV 5 volt Power Supply Range 100ELT23 Series: 10ELT23 Series 2. 200mV input guarantees full logic at output. 3. These values are for VCC = 5.0V. Level Specifications will vary 1:1 VCC. PRODUCT ORDERING CODE Ordering Code mV mV Package Type Operating Range VCC Range (V) SY10ELT23ZC Z8-1 Commercial +4.75 to +5.5 SY10ELT23ZCTR Z8-1 Commercial +4.75 to +5.5 SY100ELT23ZC Z8-1 Commercial +4.5 to +5.5 SY100ELT23ZCTR Z8-1 Commercial +4.5 to +5.5 3 +4.5V to +5.5V. +4.75V to +5.5V. ClockWorks™ SY10ELT23 SY100ELT23 Micrel 8 LEAD SOIC .150" WIDE (Z8-1) Rev. 03 MICREL-SYNERGY TEL 3250 SCOTT BOULEVARD SANTA CLARA CA 95054 USA + 1 (408) 980-9191 FAX + 1 (408) 914-7878 WEB http://www.micrel.com This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc. © 2000 Micrel Incorporated 4