5V/3.3V 2:1 MULTIPLEXER FEATURES ■ ■ ■ ■ ■ ■ DESCRIPTION 3.3V and 5V power supply options 275ps typical propagation delay High bandwidth to XGHz min. 75kΩ internal input pulldown resistors Q output will default LOW with inputs open or at VEE Available in 8-pin SOIC and 10-pin MSOP packages The SY10EP58V is a 2:1 multiplexer. The device is pin and functionally equivalent to the SY100EL58 device. PIN CONFIGURATION/BLOCK DIAGRAM PIN NAMES Pin NC 1 Da 2 1 SEL 4 0 Function 8 VCC Da, Db ECL Data Inputs 7 Q SEL ECL Select Inputs Q, /Q ECL Data Outputs MUX Db 3 PRELIMINARY SY10EP58V 6 /Q 5 VEE Available in 8-Pin SOIC or MSOP package Rev.: A 1 Amendment: /1 Issue Date: December 2000 Micrel SY10EP58V ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit VCC Power Supply Voltage (VEE = 0) –6.0 to 0 Vdc VEE Power Supply Voltage (VCC = 0) +6.0 to 0 Vdc VI Input Voltage (VCC = 0V) –6.0 to 0 Vdc VI Input Voltage (VEE = 0V) +6.0 to 0 Vdc IOUT Output Current 50 100 mA TA Operating Temperature Range –40 to +85 °C Tstore Storage Temperature Range –65 to +150 °C –Continuous –Surge NOTE: 1. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM RATlNG conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS(1) VCC = 0V; VEE = –5.5V to –3.0V or VCC = +3.3V ±10%; VEE = 0V or VCC = +5.0V ±10%, VEE = 0V(4) TA = –40°C Symbol IEE VOH Parameter Power Supply Output HIGH Current(2) Voltage(3) TA = +25°C Max. Min. Typ. Max. Min. Max. Unit 20 40 20 30 40 22 40 mA VCC –1135 VCC –885 VCC –1070 VCC –945 Voltage(3) TA = +85°C Min. VCC –820 VCC –1010 VCC –760 mV VCC –1935 VCC –1685 VCC –1870 VCC –1745 VCC –1620 VCC –1810 VCC –1560 mV VOL Outuput LOW VIH Input HIGH Voltage VCC –1210 VCC –885 VCC –1145 — VCC –820 VCC –1085 VCC –760 mV VIL Input LOW Voltage VCC –1935 VCC –1610 VCC –1870 — VCC –1545 VCC –1810 VCC –1485 mV IIH Input HIGH Current IIL Input LOW Current D — 150 — — 150 — 150 µA 0.5 — 0.5 — — 0.5 — µA NOTES: 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. VCC = 0V, VEE = –3.3V, all other pins floating. 3. All loading with 50Ω to VCC –3.0V. 4. Input and output parameters vary 1:1 with VCC. 2 Micrel SY10EP58V AC ELECTRICAL CHARACTERISTICS VCC = 0V; VEE = –5.5V to –3.0V or VCC = +3.3V ±10%; VEE = 0V or VCC = +5.0V ±10%, VEE = 0V TA = –40°C Symbol Parameter Maximum Toggle tPLH tPHL Propagation Delay to Output Differential tr tf Output Rise/Fall Times (20% to 80%) Min. Typ. Max. Min. Max. Unit TBD — TBD — — TBD — GHz D➝ Q, /Q SEL➝ Q, /Q 170 170 350 350 190 190 275 275 375 375 210 210 400 400 ps ps Q 60 190 60 130 200 70 220 ps NOTES: 1. fMAX guaranteed for functionality only. PRODUCT ORDERING INFORMATION Ordering Code TA = +85°C Max. Frequency(1) fMAX TA = +25°C Min. Package Type Operating Range SY10EP58VZC Z8-1 Commercial SY10EP58VZCTR Z8-1 Commercial SY10EP58VKC K10-1 Commercial SY10EP58VKCTR K10-1 Commercial 3 Micrel SY10EP58V 10 LEAD MSOP (K10-1) Rev. 00 4 Micrel SY10EP58V 8 LEAD PLASTIC SOIC (Z8-1) Rev. 03 MICREL-SYNERGY TEL + 1 (408) 980-9191 FAX 3250 SCOTT BOULEVARD SANTA CLARA CA 95054 USA + 1 (408) 914-7878 WEB http://www.synergysemi.com http://www.micrel.com This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc. © 2000 Micrel Incorporated 5