3.3V DUAL TTL-to-DIFFERENTIAL PECL TRANSLATOR FEATURES ■ ■ ■ ■ ■ ■ ■ SY10ELT22L SY100ELT22L DESCRIPTION 3.3V power supply 300ps typical propagation delay <100ps output-to-output skew Differential PECL outputs PNP TTL inputs for minimal loading Flow-through pinouts Available in 8-pin SOIC package The SY10/100ELT22L are dual TTL-to-differential PECL translators with +3.3V power supply. Because PECL (Positive ECL) levels are used, only +3.3V and ground are required. The small outline 8-lead SOIC package and the low skew, dual gate design of the ELT22L makes it ideal for applications which require the tranlation of a clock and a data signal. The ELT22L is available in both ECL standards: the 10ELT is compatible with positive ECL 10H logic levels, while the 100ELT is compatible with positive ECL 100K logic levels. PIN NAMES PIN CONFIGURATION/BLOCK DIAGRAM Pin Q0 Q0 8 1 7 2 PECL VCC D0 TTL Q1 3 6 Q1 4 5 D1 GND Function Qn Differential PECL Outputs Dn TTL Inputs VCC +3.3V Supply GND Ground SOIC TOP VIEW Rev.: H 1 Amendment: /0 Issue Date: March, 1999 SY10ELT22L SY100ELT22L Micrel ABSOLUTE MAXIMUM RATINGS(1) Symbol Paramter TRUTH TABLE Value Unit D Q Q VCC Power Supply Voltage –0.5 to +7.0 V H H L VI TTL Input Voltage –0.5 to VCC V L L H II TTL Input Current –30 to +5.0 mA Open H L IOUT PECL Output Current — Continuous — Surge 50 100 Tstore Storage Temperature –65 to +150 °C Tamb Operating Temperature –40 to +85 °C mA NOTE: 1. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM RATlNG conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS(1) VCC = +3.0V to +3.8V TA = -40°C Symbol ICC Parameter Min. Max. Power Supply Current NOTE: 1. Parametric values specified at: — 25 3 volt Power Supply Range TA = 0°C TA = +25°C Min. Max. Min. Max. — 25 — 25 TA = +85°C Min. Max. Unit — 25 mA Condition — 10/100ELT22L Series: +3.0V to +3.8V. AC ELECTRICAL CHARACTERISTICS(1) VCC = +3.0V to +3.8V TA = -40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition tPLH tPHL Propagation Delay to Output D, ENECL/ENTTL 100 600 100 600 100 600 100 600 ps 50Ω to VCC – 2.0V tr tf Output Rise/Fall Time 20% to 80% 200 500 200 500 200 500 200 500 ps 50Ω to VCC – 2.0V tskpp Part-to-Part Skew(2) — 500 — 500 — 500 — 500 ps 50Ω to VCC – 2.0V — 100 — 100 — 100 — 100 ps 50Ω to VCC – 2.0V tskew Within-Device Skew(2,3) NOTES: 1. Parametric values specified at: 3 volt Power Supply Range 2. Guaranteed, but not tested. 3. Same transition @common VCC levels. 10/100ELT22L Series: +3.0V to +3.8V. 2 SY10ELT22L SY100ELT22L Micrel TTL DC ELECTRICAL CHARACTERISTICS(1) VCC = +3.0V to +3.8V TA = -40°C Symbol Parameter TA = +25°C TA = +85°C Min. Max. Min. TA = 0°C Max. Min. Max. Min. Max. Unit Condition VIH Input HIGH Voltage 2.0 — 2.0 — 2.0 — 2.0 — V — VIL Input LOW Voltage — 0.8 — 0.8 — 0.8 — 0.8 V — IIH Input HIGH Current — — 20 100 — — 20 100 — — 20 100 — — 20 100 µA VIN = 2.7V VIN = VCC IIL Input LOW Current — –0.2 — –0.2 — –0.2 — –0.2 mA VIN = 0.5V VIK Input Clamp Voltage — –1.2 — –1.2 — –1.2 — –1.2 V NOTE: 1. Parametric values specified at: 3 volt Power Supply Range IIN = –18mA 10/100ELT22L Series: +3.0V to +3.8V. PECL DC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40°C Symbol VOH VOL Parameter TA = +25°C TA = +85°C Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. 10ELT 2220 100ELT 2220 — — 2410 2420 2280 2275 — — 2460 2420 2320 2275 — — 2490 2420 2390 2275 — — 2580 2420 Output LOW Voltage(2) 10ELT 1350 100ELT 1470 — — 1650 1750 1350 1490 — — 1670 1680 1350 1490 — — 1670 1680 1350 1490 — — 1705 1680 Output HIGH Min. TA = 0°C Voltage(2) mV mV NOTES: 1. Parametric values specified at: 3 volt Power Supply Range 10/100ELT22L Series: +3.0V to +3.8V. 2. These values are for VCC = 3.3V. Level Specifications will vary 1:1 with VCC. PRODUCT ORDERING CODE Ordering Code Unit Package Type Operating Range VCC Range (V) SY10ELT22LZC Z8-1 Commercial +3.0 to +3.8 SY10ELT22LZCTR Z8-1 Commercial +3.0 to +3.8 SY100ELT22LZC Z8-1 Commercial +3.0 to +3.8 SY100ELT22LZCTR Z8-1 Commercial +3.0 to +3.8 3 SY10ELT22L SY100ELT22L Micrel 8 LEAD SOIC .150" WIDE (Z8-1) Rev. 03 MICREL-SYNERGY TEL 3250 SCOTT BOULEVARD SANTA CLARA CA 95054 USA + 1 (408) 980-9191 FAX + 1 (408) 914-7878 WEB http://www.micrel.com This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc. © 2000 Micrel Incorporated 4