NC7SZ126 TinyLogic® UHS Buffer with 3-STATE Output Features General Description ■ Space saving SOT23 or SC70 5-lead package The NC7SZ126 is a single buffer with 3-STATE output from Fairchild's Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V range. The inputs and output are high impedance above ground when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. The output tolerates voltages above VCC in the 3-STATE condition. ■ Ultra small MicroPak™ leadless package ■ Ultra High Speed; tPD 2.6ns Typ. into 50pF at 5V VCC ■ High Output Drive; ±24mA at 3V VCC ■ Broad VCC Operating Range; 1.65V to 5.5V ■ Matches the performance of LCX when operated at 3.3V VCC ■ Power down high impedance inputs/output ■ Overvoltage tolerant inputs facilitate 5V to 3V translation ■ Patented noise/EMI reduction circuitry implemented Ordering Information Order Number Package Number Product Code Top Mark NC7SZ126M5X MA05B NC7SZ126P5X NC7SZ126L6X Package Description Supplied As 7Z26 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel MAA05A Z26 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel MAC06A FF 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output March 2008 Logic Symbol Pin Assignments for SC70 and SOT23 Function Table (Top View) Inputs Pad Assignments for MicroPak Output OE A OUT Y H L L H H H L X Z H = HIGH Logic Level L = LOW Logic Level X = HIGH or LOW Logic Level (Top Thru View) Z = HIGH Impedance State Pin Description Pin Names Description A, OE Inputs Y Output NC No Connect ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 2 NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output Connection Diagram Symbol Parameter Rating VCC Supply Voltage –0.5V to +6V VIN DC Input Voltage –0.5V to +6V DC Output Voltage –0.5V to +6V VOUT DC Input Diode Current @ VIN < –0.5V @ VIN > 6V –50mA +20mA DC Output Diode Current @ VOUT < –0.5V @ VOUT > 6V, VCC = GND –50mA +20mA DC Output Current ±50mA ICC / IGND DC VCC /GND Current ±50mA TSTG Storage Temperature IIK IOK IOUT TJ -65°C to +150°C Junction Temperature under Bias 150°C TL Junction Lead Temperature (Soldering, 10 seconds) 260°C PD Power Dissipation @ +85°C SOT23-5 SC70-5 200mW 150mW Recommended Operating Conditions(1) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Supply Voltage Operation Rating 1.65V to 5.5V VCC Supply Voltage Data Retention VIN Input Voltage 0V to 5.5V Output Voltage Active State 3-STATE 0V to VCC 0V to 5.5V VOUT TA tr , tf θJA 1.5V to 5.5V Operating Temperature –40°C to +85°C Input Rise and Fall Time VCC = 1.8V, 2.5V ±0.2V VCC = 3.3V ±0.3V VCC = 5.0V ±0.5V 0ns/V to 20ns/V 0ns/V to 10ns/V 0ns/V to 5ns/V Thermal Resistance SOT23-5 SC70-5 300°C/W 425°C/W Notes: 1. Unused inputs must be held HIGH or LOW. They may not float. ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 3 NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = +25°C Symbol Parameter VCC (V) Conditions Min. VIH HIGH Level Input Voltage 1.65–1.95 0.75 x VCC 2.3–5.5 0.7 x VCC VIL LOW Level Input Voltage 1.65–1.95 VOH HIGH Level Output Voltage 1.65 LOW Level Output Voltage Max. Min. 0.3 x VCC 1.55 1.8 1.7 1.8 1.7 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 1.65 IOH = –4mA 1.29 1.52 1.29 2.3 IOH = –8mA 1.9 2.15 1.9 3.0 IOH = –16mA 2.4 2.80 2.4 3.0 IOH = –24mA 2.3 2.68 2.3 IOH = –32mA 3.8 4.20 V 3.8 0.0 0.1 0.1 1.8 0.0 0.1 0.1 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 4.5 0.0 0.1 0.1 1.65 IOL = 4mA 0.08 0.24 0.24 2.3 IOL = 8mA 0.10 0.3 0.3 3.0 IOL = 16mA 0.15 0.4 0.4 3.0 IOL = 24mA 0.22 0.55 0.55 IOL = 32mA 0.22 4.5 V 0.3 x VCC 1.65 VIN = VIL IOL = 100µA V 0.25 x VCC 1.55 1.65 Unit 0.7 x VCC 0.25 x VCC VIN = VIH IOH = –100µA Max. 0.75 x VCC 2.3–5.5 4.5 VOL Typ. TA = –40°C to +85°C V 0.55 0.55 IIN Input Leakage Current 0–5.5 VIN = 5.5V, GND ±1 ±10 µA IOZ 3-STATE Output Leakage 0–5.5 VIN = VIH or VIL, VO = VCC or GND ±1 ±10 µA IOFF Power Off Leakage Current 0.0 VIN or VOUT = 5.5V 1 10 µA ICC Quiescent Supply Current 2.0 20 µA 1.65–5.5 ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 VIN = 5.5V, GND www.fairchildsemi.com 4 NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output DC Electrical Characteristics TA = –40°C to +85°C TA = +25°C Symbol tPLH, tPHL tPLH, tPHL tPZL, tPZH Parameter Propagation Delay Propagation Delay Output Enable Time VCC (V) 1.65 1.8 Conditions CL = 15pF, RD = 1MΩ, S1 = OPEN Typ. Max. Min. Max. Units Fig. No. 6.4 13.2 2.0 13.8 2 5.3 11 2 11.5 0.8 3.4 7.5 0.8 8.0 3.3 ± 0.3 0.5 2.5 5.2 0.5 5.5 5.0 ± 0.5 0.5 2.1 4.5 0.5 4.8 3.3 ± 0.3 5.0 ± 0.5 1.65 1.8 3.3 ± 0.3 CL = 50pF, RD = 500Ω, S1 = OPEN CL = 50pF, RD = 500Ω, RU = 500Ω, S1 = GND for tPZH, S1 = VI for tPZL, VI = 2 × VCC 5.0 ± 0.5 Output Disable Time 2.0 2.5 ± 0.2 2.5 ± 0.2 tPLZ, tPHZ Min. 1.65 1.8 2.5 ± 0.2 3.3 ± 0.3 CL = 50 pF, RD = 500Ω, RU = 500Ω, S1 = GND for tPHZ, S1 = VI for tPLZ, VI = 2 × VCC 5.0 ± 0.5 1.5 3.2 5.7 1.5 6.0 0.8 2.6 5.0 0.8 5.3 2.0 8.4 15.0 2.0 15.6 2.0 6.1 11.5 2 12 1.5 3.8 8.0 1.5 8.5 1.5 3.2 5.7 1.5 6.0 0.8 2.3 5.0 0.8 5.3 2.0 6.5 13.2 2.0 14.5 2.0 5.6 11 2.0 12 1.0 4.0 8.0 1.0 8.5 1.0 3.5 5.7 1.0 6.0 0.5 2.5 4.7 0.5 5.0 ns Figure 1 Figure 3 ns Figure 1 Figure 3 ns Figure 1 Figure 3 ns Figure 1 Figure 3 CIN Input Capacitance 0 4 pF COUT Output Capacitance 0 8 pF CPD Power Dissipation Capacitance 17 pF 3.3 (2) 5.0 Figure 2 24 Note: 2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICC static). ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 5 NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output AC Electrical Characteristics NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0MHz, tw = 500ns Figure 1. AC Test Circuit Input = AC Waveform; tr = tf = 1.8ns; PRR = 10MHz; Duty Cycle = 50% Figure 2. ICCD Test Circuit Figure 3. AC Waveforms ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 6 Tape Format for SC70 and SOT23 Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status M5X, P5X Leader (Start End) 125 (typ.) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ.) Empty Sealed Tape Dimensions inches (millimeters) Package Tape Size Dim A Dim B Dim F Dim Ko Dim P1 Dim W SC70-5 8mm 0.093 (2.35) 0.096 (2.45) 0.138 ± 0.004 (3.5 ± 0.10) 0.053 ± 0.004 (1.35 ± 0.10) 0.157 (4) 0.315 ± 0.004 (8 ± 0.1) SOT23-5 8mm 0.130 (3.3) 0.130 (3.3) 0.138 ± 0.002 (3.5 ± 0.05) 0.055 ± 0.004 (1.4 ± 0.11) 0.157 (4) 0.315 ± 0.012 (8 ± 0.3) ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 7 NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output Tape and Reel Specifications Tape Format for MicroPak Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status L6X Leader (Start End) 125 (typ.) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ.) Empty Sealed Reel Dimensions inches (millimeters) Tape Size A B 8 mm 7.0 (177.8) 0.059 (1.50) ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 C D N 0.512 0.795 2.165 (13.00) (20.20) (55.00) W1 W2 W3 0.331 + 0.059/–0.000 (8.40 + 1.50/–0.00) 0.567 (14.40) W1 + 0.078/–0.039 (W1 + 2.00/–1.00) www.fairchildsemi.com 8 NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output Tape and Reel Specifications (Continued) CL 3.00 2.80 5 0.95 A 0.95 4 B 3.00 2.60 1.70 1.50 1 2 2.60 3 (0.30) 1.00 0.50 0.30 0.95 1.90 0.20 C A B 0.70 TOP VIEW LAND PATTERN RECOMMENDATION SEE DETAIL A 1.30 0.90 1.45 MAX 0.15 0.05 0.22 0.08 C 0.10 C NOTES: UNLESS OTHEWISE SPECIFIED GAGE PLANE A) THIS PACKAGE CONFORMS TO JEDEC MO-178, ISSUE B, VARIATION AA, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) MA05Brev5 0.25 8° 0° 0.55 0.35 0.60 REF SEATING PLANE Figure 4. 5-Lead SOT23, JEDEC MO-178, 1.6mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 9 NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output Physical Dimensions NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output Physical Dimensions (Continued) Figure 5. 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 10 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.49) 5X 1.00 (0.75) (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C DETAIL A 0.25 0.15 6X 1.0 0.10 0.05 0.45 0.35 0.10 0.00 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 (0.05) 6X 0.5 BOTTOM VIEW 0.075 X 45 CHAMFER DETAIL A PIN 1 TERMINAL (0.13) 4X Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC Figure 6. 6-Lead MicroPak, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 11 NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output Physical Dimensions (Continued) ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EZSWITCH™ * ™ PDP-SPM™ Power220® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter® * ® SupreMOS™ SyncFET™ ® The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I33 ©1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 12 NC7SZ126 — TinyLogic® UHS Buffer with 3-STATE Output TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.