FAIRCHILD NC7WV07_12

NC7WV07
TinyLogic® ULP-A Bual Buffer (Open-Drain Output)
Features
Description


0.9V to 3.6V VCC Supply Operation

Extremely High Speed tPD
- 1.0ns: Typical for 2.7V to 3.6V VCC
- 1.2ns: Typical for 2.3V to 2.7V VCC
- 2.0ns: Typical for 1.65V to 1.95V VCC
- 3.2ns: Typical for 1.4V to 1.6V VCC
- 6.0ns: Typical for 1.1V to 1.3V VCC
- 13.0ns: Typical for 0.9V VCC
The NC7WV07 is a dual buffer with open drain output
from Fairchild's Ultra Low Power-A series of TinyLogic®
ULP-A is ideal for applications that require extreme high
speed, high drive and low power. This product is
designed for a wide low voltage operating range (0.9V to
3.6V VCC) and applications that require more drive and
speed than the TinyLogic ULP series, but still offer best
in class low power operation.


3.6V Over-Voltage Tolerant I/Os at VCC from
0.9V to 3.6V
The NC7WV07 is uniquely designed for optimized power
and speed, and is fabricated with an advanced CMOS
technology to achieve high-speed operation while
maintaining low CMOS power dissipation.
Power-Off High-Impedance Inputs and Outputs
High Static Drive (IOH/IOL)
- 24mA at 3.00V VCC
-18mA at 2.30V VCC
-6mA at 1.65V VCC
- 4mA at 1.4V VCC
- 2mA at 1.1V VCC
- 0.1mA at 0.9V VCC

Uses Proprietary Quiet Series™ Noise/EMI
Reduction Circuitry


Ultra-Small MicroPak™ Packages
Ultra-Low Dynamic Power
Ordering Information
Part Number
Top Mark
Package
Packing Method
NC7WV07P6X
V07
6-Lead SC70, EIAJ SC-88a, 1.25mm Wide
3000 Units on Tape & Reel
NC7WV07L6X
BC
6-Lead MicroPak™, 1.00mm Wide
5000 Units on Tape & Reel
TinyLogic®is a registered trademark of Fairchild Semiconductor Corporation.
MicroPak™and Quiet Series™are trademarks of Fairchild Semiconductor Corporation.
© 2006 Fairchild Semiconductor Corporation
NC7WV07 • Rev. 1.0.2
www.fairchildsemi.com
NC7WV07 — TinyLogic® ULP-A Dual Buffer (Open-Drain Output)
July 2012
700
600
500
ULP (SP)
Battery Life 400
(Days)
300
ULP-A (SV)
200
100
0
0.9
1.2
UHS (SZ)
1.5 1.8
2.5 3.3
VCC Supply Voltage
5.0
Figure 1. Battery Life vs. VCC Supply Voltage
Notes:
1. TinyLogic® ULP and ULP-A with up to 50% less power consumption can extend battery life significantly.
Battery Life (Vbattery•Ibattery•.9)/(Pdevice)/24hrs/day
where, Pdevice (ICC • VCC) (CPD CL) • VCC2 • f.
2. Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and derated 90% and device frequency at
10MHz, with CL=15pF load.
Pin Configurations
Figure 2. SC70 (Top View)
NC7WV07 — TinyLogic® ULP-A Dual Buffer (Open-Drain Output)
Battery Life
Figure 3. MicroPak (Top Through View)
Pin Definitions
Pin # SC70
Pin # MicroPak
Name
Description
1
1
A1
2
2
GND
3
3
A2
Data Inputs
4
4
Y2
Output
5
5
VCC
Supply Voltage
6
6
Y1
Output
Data Inputs
Ground
Function Table
Inputs
Output
A
Y
L
L
H
*H
H=HIGH Logic Level
L=LOW Logic Level
*H=HIGH Impedance Output Status (Open Drain)
© 2006 Fairchild Semiconductor Corporation
NC7WV07 • Rev. 1.0.2
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VCC
Supply Voltage
-0.5
4.6
V
VIN
DC Input Voltage
-0.5
4.6
V
VOUT
4.6
V
IIK
DC Input Diode Current
VIN < 0V
-50
mA
IOK
DC Output Diode Current
VOUT < 0V
-50
mA
DC Output Sink Current
+50
mA
DC VCC or Ground Current per Supply Pin
±50
mA
+150
°C
IOL
ICC or IGND
TSTG
DC Output Voltage
-0.5
Storage Temperature Range
-65
TJ
Junction Temperature Under Bias
+150
°C
TL
Junction Lead Temperature, Soldering 10 Seconds
+260
°C
PD
Power Dissipation at +85°C
SC70-5
150
MicroPak-6
130
MicroPak2-6
ESD
mW
120
Human Body Model, JEDEC:JESD22-A114
4000
Charge Device Model, JEDEC:JESD22-C101
2000
V
NC7WV07 — TinyLogic® ULP-A Dual Buffer (Open-Drain Output)
Absolute Maximum Ratings
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
VCC
Supply Voltage
VIN
Input Voltage
VOUT
IOL
TA
t/V
JA
Conditions
Output Voltage
Output Current in IOL
Thermal Resistance
Max.
Unit
0.9
3.6
V
0
3.6
V
3.6
V
0
VCC=3.0V to 3.6V
+24.0
VCC=2.3V to 3.6V
+18.0
VCC=1.65V to 1.95V
+6.0
VCC=1.4V to 1.6V
+4.0
VCC=1.1V to 1.3V
+2.0
VCC=0.9V
+0.1
Operating Temperature, Free Air
Minimum Input Edge Rate
Min.
-40
mA
+85
°C
ns/V
VIN=0.8V to 2.0, VCC=3.0V
10
SC70-5
425
MicroPak-6
500
°C/W
Note:
3. Unused inputs must be held HIGH or LOW. They may not float.
© 2006 Fairchild Semiconductor Corporation
NC7WV07 • Rev. 1.0.2
www.fairchildsemi.com
3
Symbol
VIH
Parameter
HIGH Level Input
Voltage
VCC
Conditions
1.10 VCC 1.30
.65 x VCC
.65 x VCC
1.40 VCC 1.60
.65 x VCC
.65 x VCC
1.65 VCC 1.95
.65 x VCC
.65 x VCC
1.6
1.6
2.0
1.10 VCC 1.30
.35 x VCC
1.65 VCC 1.95
.35 x VCC
.35 x VCC
2.30 VCC 2.70
0.7
0.7
2.70 VCC 3.60
0.8
0.8
0.90
0.1
0.1
1.10 VCC 1.30
0.1
0.1
0.2
0.2
0.2
0.2
2.30 VCC 2.70
0.2
0.2
2.70 VCC 3.60
0.2
0.2
1.10  VCC  1.30
IOL=2mA
0.25 x VCC
0.25 x VCC
1.40  VCC  1.60
IOL=4mA
0.25 x VCC
0.25 x VCC
1.65  VCC  1.95
IOL=6mA
0.3
0.3
2.70  VCC  3.60
2.30 VCC  2.70
2.70  VCC  3.60
2.70  VCC  3.60
Input Leakage
Current
Power Off
Leakage Current
ICC
Quiescent Supply
Current
.35 x VCC
.35 x VCC
2.30  VCC  2.70
IOFF
2.0
.35 x VCC
.35 x VCC
IOL=100µA
© 2006 Fairchild Semiconductor Corporation
NC7WV07 • Rev. 1.0.2
0.90 to 3.60
0
0.90 to 3.60
IOL=12mA
Units
V
.35 x VCC
1.65 VCC 1.95
IIN
Max.
1.40 VCC 1.60
1.40 VCC 1.60
LOW Level Output
Voltage
Min.
.65 x VCC
0.90
VOL
Max.
.65 x VCC
2.70 VCC 3.60
LOW Level Input
Voltage
Min.
TA=-40 to 85°C
0.90
2.30 VCC 2.70
VIL
TA=25°C
0.4
0.4
0.4
0.4
V
V
0.6
0.6
0.4
0.4
IOL=24mA
0.55
0.55
0  VIN  3.60
±0.1
±0.5
µA
0  (VIN, VO)
 3.60
0.5
0.5
µA
VIN=VCC, or
GND
0.9
0.9
IOL=18mA
NC7WV07 — TinyLogic® ULP-A Dual Buffer (Open-Drain Output)
DC Electrical Characteristics
µA
VCC  VIN 
3.6V
±0.9
www.fairchildsemi.com
4
Symbol
Parameter
VCC
1.10  VCC  1.30
tPZL, tPLZ
Min.
Typ.
CL=15pF,
RU=RD=1M
0.90
Propagation
Delay
TA=25°C
Conditions
1.40  VCC  1.60
2.70  VCC  3.60
Max.
Min.
Max.
Units
Figure
ns
Figure 4
Figure 5
13
CL=15pF,
RU=RD=2k
1.65  VCC  1.95
2.30  VCC  2.70
TA=-40 to 85°C
CL=30pF,
RU=RD=500
2.0
6.0
15.0
1.0
18.6
1.0
3.2
8.7
1.0
9.7
1.0
2.0
6.0
1.0
6.8
0.7
1.2
3.6
0.6
4.7
0.5
1.0
3.3
0.4
4.0
CIN
Input
Capacitance
0
2
COUT
Output
Capacitance
0
6.5
CPD
Power
Dissipation
Capacitance
0.90 to 3.60
VIN=0V or VCC,
f=10MHz
pF
10
pF
AC Loadings and Waveforms
Figure 4. AC Test Circuit
Test
Switch
tPZL, tPLZ
6V at VCC=3.3±0.3V; VCC x 2 at VCC=0.9-2.7V
NC7WV07 — TinyLogic® ULP-A Dual Buffer (Open-Drain Output)
AC Electrical Characteristics
Figure 5. AC Waveforms for Inverting and Non-Inverting Functions
VCC
Symbol
3.3V ± 0.3V
2.5V ± 0.2V
1.8V ±
0.15V
1.5V ± 0.1V
1.2V ± 0.1V
0.9V
Vmi
1.5V
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
Vmo
VOL + 0.30V
VOL + 0.15V
VOL + 0.15V
VOL + 0.10V
VOL + 0.10V
VOL + 0.10V
© 2006 Fairchild Semiconductor Corporation
NC7WV07 • Rev. 1.0.2
www.fairchildsemi.com
5
NC7WV07 — TinyLogic® ULP-A Dual Buffer (Open-Drain Output)
Physical Dimensions
SYMM
C
L
2.00±0.20
0.65
A
0.50 MIN
4
6
B
PIN ONE
1.25±0.10
1
1.90
3
0.30
0.15
(0.25)
0.40 MIN
0.10
0.65
A B
1.30
LAND PATTERN RECOMMENDATION
1.30
1.00
0.80
SEE DETAIL A
1.10
0.80
0.10 C
0.10
0.00
C
2.10±0.30
SEATING
PLANE
NOTES: UNLESS OTHERWISE SPECIFIED
GAGE
PLANE
(R0.10)
0.25
0.10
0.20
A) THIS PACKAGE CONFORMS TO EIAJ
SC-88, 1996.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE BURRS
OR MOLD FLASH.
D) DRAWING FILENAME: MKT-MAA06AREV6
30°
0°
0.46
0.26
DETAIL A
SCALE: 60X
Figure 6. 6-Lead, SC70, EIAJ SC-88a, 1.25mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/analog/pdf/sc70-6_tr.pdf.
Package Designator
P6X
© 2006 Fairchild Semiconductor Corporation
NC7WV07 • Rev. 1.0.2
Tape Section
Cavity Number
Leader (Start End)
125 (Typical)
Cavity Status Cover Type Status
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
6
NC7WV07 — TinyLogic® ULP-A Dual Buffer (Open-Drain Output)
Physical Dimensions
2X
0.05 C
1.45
B
2X
(1)
0.05 C
(0.254)
(0.49)
5X
1.00
(0.75)
PIN 1 IDENTIFIER
5
(0.52)
1X
A
TOP VIEW
0.55MAX
(0.30)
6X
PIN 1
0.05 C
0.05
0.00
RECOMMENED
LAND PATTERN
0.05 C
C
0.25
0.15 6X
1.0
DETAIL A
0.10
0.05
0.45
0.35
0.10
0.00 6X
C B A
C
0.40
0.30
0.35 5X
0.25
0.40 5X
0.30
0.5
(0.05)
6X
BOTTOM VIEW
DETAIL A
PIN 1 TERMINAL
0.075 X 45
CHAMFER
(0.13)
4X
Notes:
1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
2. DIMENSIONS ARE IN MILLIMETERS
3. DRAWING CONFORMS TO ASME Y14.5M-1994
4. FILENAME AND REVISION: MAC06AREV4
5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY
OTHER LINE IN THE MARK CODE LAYOUT.
Figure 7. 6-Lead, MicroPak™, 1.0mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.
Package Designator
L6X
© 2006 Fairchild Semiconductor Corporation
NC7WV07 • Rev. 1.0.2
Tape Section
Cavity Number
Cavity Status Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
7
NC7WV07 — TinyLogic® ULP-A Dual Buffer (Open-Drain Output)
© 2006 Fairchild Semiconductor Corporation
NC7WV07 • Rev. 1.0.2
www.fairchildsemi.com
8