SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue PACKAGE DIMENSIONS 2 Top View 1 G 0.060 (1.5) R 0.107 (2.7) B 4 3 COMMON ANODE 0.127 (3.2) RESIN Side View 0.043 (1.1) 0.0198 (0.5) PCB ANODE SIDE Bottom View 0.0473 (1.2) 0.0276 (0.7) Die 1 Pin 1 (Red) Die 2 Pin 2 (Green) Pin 4 Die 3 Pin 3 (Blue) APPLICATIONS POLARITY • Keypad backlighting • Push-button backlighting NOTE: Dimensions for all drawings are in inches (mm). • LCD backlighting DESCRIPTION This full-color surface mount chip LED is designed to fit industry standard footprint. Small size, low profile and wide viewing angle make this LED ideal for backlighting applications and panel illumination. FEATURES • Miniature footprint - 3.2(L) X 2.7(W) X 1.1(H) mm • AllnGaP and InGaN technology • Wide viewing angle of 140° • Diffused optics • Moisture-proof packaging • Available in 0.315" (8mm) width tape on 7" (178mm) diameter reel; 2,000 units per reel © 2003 Fairchild Semiconductor Corporation Page 1 of 7 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue ABSOLUTE MAXIMUM RATINGS (TA =25°C Unless otherwise specified) Parameter Symbol R G B Units IF 30 20 20 mA Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) IFM 100 80 80 mA Reverse Voltage (IR = 100 µA) VR Power Dissipation PD Continuous Forward Current 5 72 V 78 78 mW Operating Temperature TOPR -30 to +80 °C Storage Temperature TSTG -40 to +85 °C Lead Soldering Time TSOL 260 for 5 sec °C ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) QTLP650D Parameter Symbol Luminous Intensity (mcd) min: typ: Forward Voltage (V) typ: max: Wavelength (nm) IV VF Condition R G B 25 63 25 60 130 40 1.9 3.3 3.3 2.4 3.9 3.9 Peak: IP 630 520 468 Dominance: ID 624 525 470 Typical Viewing Angle (°) © 2003 Fairchild Semiconductor Corporation 2U1/2 Page 2 of 7 140 IF = 20mA IF = 20mA IF = 20mA IF = 20mA 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue TYPICAL PERFORMANCE CURVES Fig. 1A Forward Current vs. Forward Voltage Fig. 1B Forward Current vs. Forward Voltage FORWARD CURRENT (mA) 40 35 100 30 25 10 20 15 1 BLUE & GREEN 10 RED 5 0 0.1 1.0 1.4 1.8 2.2 0 2.6 2 FORWARD VOLTAGE (V) 3 5 4 FORWARD VOLTAGE (V) Fig. 2 Relative Intensity vs. Forward Current Fig. 3 Forward Current vs. Ambient Temperature 30 125 FORWARD CURRENT (mA) RELATIVE INTENSITY (%) 150 100 75 50 25 0 0 5 10 15 20 25 30 35 25 FORWARD VOLTAGE (mA) BLUE & GREEN 15 10 5 3 0 -20 40 RED 20 0 20 40 60 80 100 AMBIENT TEMPERATURE (°C) Fig. 4 Relative Intensity vs. Peak Wavelength RELATIVE INTENSITY 1.0 0.5 0 468 520 630 WAVELENGTH (nm) © 2003 Fairchild Semiconductor Corporation Page 3 of 7 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue TYPICAL PERFORMANCE CURVES Fig.5 Radiation Diagrams 0° -30° 0° -30° 30° QTLP650D RGB -60° 60° B B -60° 60° G R 100% 30° QTLP650D RGB G 50% 0 © 2003 Fairchild Semiconductor Corporation 50% R 100% 100% Page 4 of 7 50% 0 50% 100% 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.181 (4.6) 0.083 (2.1) 0.114 (2.9) 0.020 (0.5) RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240° C MAX +5° C/s MAX -5° C/s MAX 60 - 120 sec Preheating 120 - 150° C MAX © 2003 Fairchild Semiconductor Corporation Page 5 of 7 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 11.0 Ø62.0±0.5 +0.5 -0.0 2.5 0± 0.5 Ø180±1 5 ±0. 2.5 Ø12.75 +0.25 -0.0 2.0±0.05 4.0 Ø1.55.±05 0.23 3.56 8.0 3.5±0.05 1.75 Progressive direction 1.65 4.0 Polarity 2.95 Dimensional tolerance is ± 0.1mm unless otherwise specified Angle: ± 0.5 Unit: mm © 2003 Fairchild Semiconductor Corporation Page 6 of 7 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. © 2003 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 7 of 7 9/26/03