SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-4 QTLP670C-RY Red/Yellow QTLP670C-RAG Red/Yellow-Green PACKAGE DIMENSIONS 0.134 (3.4) 0.118 (3.0) Ø0.094 (2.4) 3 2 4 1 0.067 (1.7 ) 0.052 (1.3) 0.091 (2.3) 0.083 (2.1) 0.118 (3.0) 0.102 (2.6) TOP 0.035 (0.9) 0.028 (0.7) 0.024 (0.6) 0.083 (2.1) 0.067 (1.7) 0.007 (0.18) 0.005 (0.12) 0.041 (1.0) SIDE 0.148 (3.7) 0.130 (3.3) 0.043 (1.1) 0.020 (0.5) BOTTOM 3 2 4 1 YELLOW / YELLOW-GREEN RED POLARITY NOTE: APPLICATIONS Dimensions for all drawings are in inches (mm). • Automotive interior lighting • Status indication for consumer electronics and office equipment DESCRIPTION These super bright dual color surface mount LEDs are designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. They are compatible with convective IR and vapor phase reflow soldering. The package size and configuration conform to EIA-535 BAAC standard specification for case size 3528 tantalum capacitor. These LEDs are ideal for backlighting and optical coupling into light pipes. FEATURES • AllnGaP technology for -R, -Y and -AG • Wide viewing angle of 120° • Water clear optics • Available in 0.315” (8mm) width tape on 7” (178mm) diameter reel; 2,000 units per reel 2001 Fairchild Semiconductor Corporation DS300110 8/31/01 1 OF 6 www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-4 QTLP670C-RY Red/Yellow ABSOLUTE MAXIMUM RATINGS Parameter QTLP670C-RAG Red/Yellow-Green (TA =25°C Unless otherwise specified) QTLP670C Symbol Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage Power Dissipation Junction Temperature Thermal Resistance (Junction-Air) Operating Temperature Storage Temperature Lead Soldering Time IF -RAG 30 / 30 IFM 160 / 120 160 / 160 mA VR PD TJ Rth JA TOPR TSTG TSOL 5 72 / 60 100 / 100 5501 / 7502 5 72 / 72 100 / 100 5501 / 7502 V mW °C K/W °C °C °C Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Wavelength (nm) Peak Dominant Spectral Line Half Width (nm) Viewing Angle (°) 1 2 Symbol mA -40 to +95 -40 to +100 260 for 5 sec ELECTRICAL / OPTICAL CHARACTERISTICS Parameter Units -RY 30 / 25 (TA =25°C) QTLP670C Units -RY -RAG IV 20 / 20 55 / 55 20 / 15 55 / 25 IF = 20mA VF 2.4 / 2.4 2.0 / 2.0 2.4 / 2.4 2.0 / 2.0 IF = 20mA 630 / 590 624 / 589 20 / 15 120 630 / 575 624 / 573 20 / 20 120 IF = 20mA DP DD D 201/2 IF = 20mA IF = 20mA One chip on Two chips on www.fairchildsemi.com 2 OF 6 8/31/01 DS300110 SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-4 QTLP670C-RY Red/Yellow QTLP670C-RAG Red/Yellow-Green TYPICAL PERFORMANCE CURVES Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. DC Forward Current 2.5 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 100 90 80 70 60 50 40 30 20 10 0 1.0 1.5 2.0 2.5 2.0 1.5 1.0 0.5 0.0 3.0 0 VF - FORWARD VOLTAGE (V) 10 20 30 40 50 IF - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength AG RELATIVE INTENSITY 1.0 Y R 0.5 0 500 550 600 650 700 WAVELENGTH (nm) Fig.4 Radiation Diagram Fig.5 Maximum Forward Current vs. Ambient Temperature -30˚ -20˚ -10˚ 0˚ 10˚ 20˚ -40˚ IF - FORWARD CURRENT (mA) 50 30˚ 40˚ -50˚ 50˚ -60˚ 60˚ -70˚ 70˚ -80˚ 80˚ -90˚ 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 90˚ 8/31/01 R and AG 30 Y 20 10 0 0 REL. LUMINOUS INTENSITY (%) DS300110 40 20 40 60 80 100 AMBIENT TEMPERATURE TA (˚C) 3 OF 6 www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-4 QTLP670C-RY Red/Yellow QTLP670C-RAG Red/Yellow-Green RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.102 [2.59] 0.043 [1.09] 0.059 [1.50] 0.177 [4.50] RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240° C MAX +5° C/s MAX -5° C/s MAX 60 - 120 sec Preheating 120 - 150° C MAX www.fairchildsemi.com 4 OF 6 8/31/01 DS300110 SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-4 QTLP670C-RY Red/Yellow QTLP670C-RAG Red/Yellow-Green TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 11.0 Ø62.0±0.5 +0.5 -0.0 2.5 0± 0.5 Ø180±1 5 ±0. 2.5 Ø12.75 +0.25 -0.0 2.0±0.05 4.0 3.84 4.0 Polarity 0.23 Ø1.55.±05 8.0 3.5±0.05 1.75 Progressive direction 3.12 2.24 Dimensional tolerance is ± 0.1mm unless otherwise specified Angle: ± 0.5 Unit: mm DS300110 8/31/01 5 OF 6 www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT PLCC-4 QTLP670C-RY Red/Yellow QTLP670C-RAG Red/Yellow-Green DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 6 OF 6 8/31/01 DS300110