MOTOROLA MC74AC245N

OCTAL BIDIRECTIONAL
TRANSCEIVER
WITH 3-STATE
INPUTS/OUTPUTS
The MC74AC245/74ACT245 contains eight non-inverting bidirectional buffers
with 3-state outputs and is intended for bus-oriented applications. Current sinking
capability is 24 mA at both the A and B ports. The Transmit/Receive (T/R) input
determines the direction of data flow through the bidirectional transceiver. Transmit
(active-HIGH) enables data from A ports to B ports; Receive (active-LOW) enables
data from B ports to A ports. The Output Enable input, when HIGH, disables both A
and B ports by placing them in a High Z condition.
•
•
•
•
Noninverting Buffers
Bidirectional Data Path
A and B Outputs Source/Sink 24 mA
′ACT245 Has TTL Compatible Inputs
N SUFFIX
CASE 738-03
PLASTIC
VCC
OE
B0
B1
B2
B3
B4
B5
B6
B7
20
19
18
17
16
15
14
13
12
11
DW SUFFIX
CASE 751D-04
PLASTIC
1
2
3
4
5
6
7
8
9
10
T/R
A0
A1
A2
A3
A4
A5
A6
A7
GND
PIN NAMES
OE
T/R
A0–A7
B0–B7
Output Enable Input
Transmit/Receive Input
Side A 3-State Inputs or 3-State Outputs
Side B 3-State Inputs or 3-State Outputs
TRUTH TABLES
Inputs
Outputs
OE
T/R
L
L
H
L
H
X
Bus B Data to Bus A
Bus A Data to Bus B
High Z State
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial
FACT DATA
5-1
MC74AC245 MC74ACT245
MAXIMUM RATINGS*
Symbol
Parameter
Value
Unit
–0.5 to +7.0
V
V
VCC
DC Supply Voltage (Referenced to GND)
Vin
DC Input Voltage (Referenced to GND)
–0.5 to VCC +0.5
Vout
DC Output Voltage (Referenced to GND)
–0.5 to VCC +0.5
V
Iin
DC Input Current, per Pin
±20
mA
Iout
DC Output Sink/Source Current, per Pin
±50
mA
ICC
DC VCC or GND Current per Output Pin
±50
mA
Tstg
Storage Temperature
–65 to +150
°C
* Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended
Operating Conditions.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
Supply Voltage
Vin, Vout
DC Input Voltage, Output Voltage (Ref. to GND)
tr, tf
Input Rise and Fall Time (Note 1)
′AC Devices except Schmitt Inputs
tr, tf
Input Rise and Fall Time (Note 2)
′ACT Devices except Schmitt Inputs
TJ
Junction Temperature (PDIP)
TA
Operating Ambient Temperature Range
IOH
IOL
Min
Typ
Max
′AC
2.0
5.0
6.0
′ACT
4.5
5.0
5.5
0
VCC
VCC @ 3.0 V
150
VCC @ 4.5 V
40
VCC @ 5.5 V
25
VCC @ 4.5 V
10
VCC @ 5.5 V
8.0
Unit
V
V
ns/V
ns/V
140
°C
85
°C
Output Current — High
–24
mA
Output Current — Low
24
mA
–40
1. Vin from 30% to 70% VCC; see individual Data Sheets for devices that differ from the typical input rise and fall times.
2. Vin from 0.8 V to 2.0 V; see individual Data Sheets for devices that differ from the typical input rise and fall times.
FACT DATA
5-2
25
MC74AC245 MC74ACT245
DC CHARACTERISTICS
Symbol
Parameter
VCC
(V)
74AC
74AC
TA = +25°C
TA =
–40°C to +85°C
Typ
VIH
VIL
VOH
Conditions
Guaranteed Limits
Minimum High Level
Input Voltage
3.0
4.5
5.5
1.5
2.25
2.75
2.1
3.15
3.85
2.1
3.15
3.85
V
VOUT = 0.1 V
or VCC – 0.1 V
Maximum Low Level
Input Voltage
3.0
4.5
5.5
1.5
2.25
2.75
0.9
1.35
1.65
0.9
1.35
1.65
V
VOUT = 0.1 V
or VCC – 0.1 V
Minimum High Level
Output Voltage
3.0
4.5
5.5
2.99
4.49
5.49
2.9
4.4
5.4
2.9
4.4
5.4
V
2.56
3.86
4.86
2.46
3.76
4.76
0.1
0.1
0.1
0.1
0.1
0.1
3.0
4.5
5.5
0.36
0.36
0.36
0.44
0.44
0.44
3.0
4.5
5.5
VOL
Unit
Maximum Low Level
Output Voltage
3.0
4.5
5.5
0.002
0.001
0.001
IOUT = –50 µA
V
*VIN = VIL or VIH
–12 mA
IOH
–24 mA
–24 mA
IOUT = 50 µA
V
V
*VIN = VIL or VIH
12 mA
IOL
24 mA
24 mA
IIN
Maximum Input
Leakage Current
5.5
±0.1
±1.0
µA
VI = VCC, GND
IOZT
Maximum
3-State
Current
5.5
±0.6
±6.0
µA
VI (OE) = VIL, VIH
VI = VCC, GND
VO = VCC, GND
5.5
75
mA
VOLD = 1.65 V Max
5.5
–75
mA
VOHD = 3.85 V Min
80.0
µA
VIN = VCC or GND
IOLD
IOHD
ICC
†Minimum Dynamic
Output Current
Maximum Quiescent
Supply Current
5.5
8.0
* All outputs loaded; thresholds on input associated with output under test.
† Maximum test duration 2.0 ms, one output loaded at a time.
Note: IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective limit @ 5.5 V VCC.
FACT DATA
5-3
MC74AC245 MC74ACT245
AC CHARACTERISTICS (For Figures and Waveforms — See Section 3)
Symbol
VCC*
(V)
Parameter
74AC
74AC
TA = +25°C
CL = 50 pF
TA = –40°C
to +85°C
CL = 50 pF
Min
Typ
Max
Min
Max
Unit
Fig.
No.
tPLH
Propagation Delay
An to Bn or Bn to An
3.3
5.0
1.5
1.5
5.0
3.5
8.5
6.5
1.0
1.0
9.0
7.0
ns
3-5
tPHL
Propagation Delay
An to Bn or Bn to An
3.3
5.0
1.5
1.5
5.0
3.5
8.5
6.0
1.0
1.0
9.0
7.0
ns
3-5
tPZH
Output Enable Time
3.3
5.0
2.5
1.5
7.0
5.0
11.5
8.5
2.0
1.0
12.5
9.0
ns
3-7
tPZL
Output Enable Time
3.3
5.0
2.5
1.5
7.5
5.5
12.0
9.0
2.0
1.0
13.5
9.5
ns
3-8
tPHZ
Output Disable Time
3.3
5.0
2.0
1.5
6.5
5.5
12.0
9.0
1.0
1.0
12.5
10.0
ns
3-7
tPLZ
Output Disable Time
3.3
5.0
2.0
1.5
7.0
5.5
11.5
9.0
1.5
1.0
13.0
10.0
ns
3-8
* Voltage Range 3.3 V is 3.3 V ±0.3 V.
Voltage Range 5.0 V is 5.0 V ±0.5 V.
DC CHARACTERISTICS
Symbol
Parameter
VCC
(V)
74ACT
74ACT
TA = +25°C
TA =
–40°C to +85°C
Typ
Guaranteed Limits
Unit
Conditions
VIH
Minimum High Level
Input Voltage
4.5
5.5
1.5
1.5
2.0
2.0
2.0
2.0
V
VOUT = 0.1 V
or VCC – 0.1 V
VIL
Maximum Low Level
Input Voltage
4.5
5.5
1.5
1.5
0.8
0.8
0.8
0.8
V
VOUT = 0.1 V
or VCC – 0.1 V
VOH
Minimum High Level
Output Voltage
4.5
5.5
4.49
5.49
4.4
5.4
4.4
5.4
V
3.86
4.86
3.76
4.76
0.1
0.1
0.1
0.1
4.5
5.5
0.36
0.36
0.44
0.44
V
*VIN = VIL or VIH
24 mA
IOL
24 mA
±0.1
±1.0
µA
VI = VCC, GND
1.5
mA
VI = VCC – 2.1 V
±6.0
µA
VI (OE) = VIL, VIH
VI = VCC, GND
VO = VCC, GND
5.5
75
mA
VOLD = 1.65 V Max
5.5
–75
mA
VOHD = 3.85 V Min
80.0
µA
VIN = VCC or GND
4.5
5.5
VOL
Maximum Low Level
Output Voltage
4.5
5.5
IIN
Maximum Input
Leakage Current
5.5
∆ICCT
Additional Max. ICC/Input
5.5
IOZT
Maximum
3-State
Current
5.5
IOLD
IOHD
ICC
†Minimum Dynamic
Output Current
Maximum Quiescent
Supply Current
0.001
0.001
0.6
±0.6
5.5
8.0
* All outputs loaded; thresholds on input associated with output under test.
† Maximum test duration 2.0 ms, one output loaded at a time.
FACT DATA
5-4
V
V
IOUT = –50 µA
*VIN = VIL or VIH
–24 mA
IOH
–24 mA
IOUT = 50 µA
MC74AC245 MC74ACT245
AC CHARACTERISTICS (For Figures and Waveforms — See Section 3)
Symbol
Parameter
VCC*
(V)
74ACT
74ACT
TA = +25°C
CL = 50 pF
TA = –40°C
to +85°C
CL = 50 pF
Min
Typ
Max
Min
Max
Unit
Fig.
No.
tPLH
Propagation Delay
An to Bn or Bn to An
5.0
1.5
4.0
7.5
1.5
8.0
ns
3-5
tPHL
Propagation Delay
An to Bn or Bn to An
5.0
1.5
4.0
8.0
1.0
9.0
ns
3-5
tPZH
Output Enable Time
5.0
1.5
5.0
10
1.5
11.0
ns
3-7
tPZL
Output Enable Time
5.0
1.5
5.5
10
1.5
12.0
ns
3-8
tPHZ
Output Disable Time
5.0
1.5
5.5
10
1.0
11.0
ns
3-7
tPLZ
Output Disable Time
5.0
2.0
5.0
10
1.5
11.0
ns
3-8
* Voltage Range 5.0 V is 5.0 V ±0.5 V.
CAPACITANCE
Symbol
Parameter
Value
Typ
Unit
Test Conditions
CIN
Input Capacitance
4.5
pF
VCC = 5.0 V
CI/O
Input/Output Capacitance
15
pF
VCC = 5.0 V
CPD
Power Dissipation Capacitance
45
pF
VCC = 5.0 V
FACT DATA
5-5
MC74AC245 MC74ACT245
OUTLINE DIMENSIONS
N SUFFIX
PLASTIC DIP PACKAGE
CASE 738–03
ISSUE E
–A–
20
11
1
10
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
4. DIMENSION B DOES NOT INCLUDE MOLD
FLASH.
B
L
C
–T–
K
SEATING
PLANE
M
N
E
G
F
J
D
20 PL
0.25 (0.010)
20 PL
0.25 (0.010)
M
T A
M
M
DW SUFFIX
PLASTIC SOIC PACKAGE
CASE 751D–04
ISSUE E
–A–
20
11
–B–
10X
P
0.010 (0.25)
1
M
B
M
10
20X
J
D
0.010 (0.25)
M
T A
B
S
S
F
R X 45 _
C
–T–
18X
G
SEATING
PLANE
K
T B
M
DIM
A
B
C
D
E
F
G
J
K
L
M
N
INCHES
MIN
MAX
1.010
1.070
0.240
0.260
0.150
0.180
0.015
0.022
0.050 BSC
0.050
0.070
0.100 BSC
0.008
0.015
0.110
0.140
0.300 BSC
0_
15 _
0.020
0.040
MILLIMETERS
MIN
MAX
25.66
27.17
6.10
6.60
3.81
4.57
0.39
0.55
1.27 BSC
1.27
1.77
2.54 BSC
0.21
0.38
2.80
3.55
7.62 BSC
0_
15_
0.51
1.01
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.150
(0.006) PER SIDE.
5. DIMENSION D DOES NOT INCLUDE
DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.13
(0.005) TOTAL IN EXCESS OF D
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
MILLIMETERS
INCHES
DIM MIN
MAX
MIN
MAX
A
12.65
12.95
0.499
0.510
B
7.40
7.60
0.292
0.299
C
2.35
2.65
0.093
0.104
D
0.35
0.49
0.014
0.019
F
0.50
0.90
0.020
0.035
G
1.27 BSC
0.050 BSC
J
0.25
0.32
0.010
0.012
K
0.10
0.25
0.004
0.009
M
0_
7_
0_
7_
P
10.05
10.55
0.395
0.415
R
0.25
0.75
0.010
0.029
M
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us:
USA/EUROPE: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315
MFAX: [email protected] –TOUCHTONE (602) 244–6609
INTERNET: http://Design–NET.com
HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
◊
FACT DATA
5-6
*MC74AC245/D*
MC74AC245/D