Order this document by MHL8115/D SEMICONDUCTOR TECHNICAL DATA The RF Line Designed for linear amplifier applications in 50 Ohm systems requiring wide bandwidth, low noise, and low distortion. Internal DC blocking on RF ports reduces external component count and related circuit area. This hybrid utilizes push–pull circuit design. • Supply Voltage: 15 Vdc (MHL8115) Supply Voltage: 28 Vdc (MHL8118) • Third Order Intercept: 41.5 dBm Typ • Power Gain: 17.5 dB Typ (@ 900 MHz) • Excellent Phase Linearity and Group Delay Characteristics • 50 Ohm Input/Output Impedances 1 W, 17.5 dB 50 – 1000 MHz LINEAR AMPLIFIERS CASE 448–02 MHL8115, STYLE 2 MHL8118, STYLE 1 ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Rating Symbol Value Unit VCC 18 32 Vdc RF Input Power Pin +20 dBm Storage Temperature Range Tstg – 40 to +100 °C Operating Case Temperature Range TC – 20 to +100 °C DC Supply Voltage MHL8115 MHL8118 ELECTRICAL CHARACTERISTICS (TC = +25°C; VCC = 15 Vdc (MHL8115), 28 Vdc (MHL8118); 50 Ω System) Characteristic Symbol Min Typ Max Unit Supply Current MHL8115 MHL8118 IDC — — 700 400 760 440 mA Power Gain (f = 900 MHz) PG 16.5 17.5 — dB Gain Flatness (f = 50 – 1000 MHz) FL — 1.0 2.0 dB Power Output @ 1 dB Comp. (f = 900 MHz) Pout 1 dB 29 30 — dBm dBm Third Order Intercept (f1 = 879 MHz, f2 = 884 MHz) ITO 40.5 41.5 — VSWR — — — — 2.0:1 2.6:1 NF — — 7.5 8.5 8.5 9.5 dB Second Harmonic Distortion (Po = 100 mW, f2H = 1000 MHz) dso — – 55 – 45 dB Second Order Intermodulation Distortion (Po = 2.75 dBm, f1 = 373 MHz, f2 = 450 MHz) IM2 — – 65 – 60 dB Intermodulation Distortion, 3 Tone (f = 860 MHz, Psync = 200 mW) IM3 — – 60 — dB Input/Output VSWR (f = 50 – 900 MHz) (f = 900 – 1000 MHz) Noise Figure, Broadband (f = 500 MHz) (f = 1000 MHz) REV 1 RF DEVICE DATA MOTOROLA Motorola, Inc. 1995 MHL8115 MHL8118 1 PIN CONFIGURATION 1 2 3 4 5 OUTPUT INPUT VCC C1 C1 ≥ 0.01 µF (CHIP) Figure 1. MHL8115 External Connections (Case 448–02, Style 2) PIN CONFIGURATION 1 2 3 4 5 OUTPUT INPUT R1 C1 C2 VCC C1, C2 ≥ 0.01 µF (CHIP) R1 = 90 Ω, 3 WATTS Figure 1. MHL8118 External Connections (Case 448–02, Style 1) MHL8115 MHL8118 2 MOTOROLA RF DEVICE DATA PACKAGE DIMENSIONS –A– NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. U N R DIM A B C D E G H J K N Q R U –B– Q 1 2 3 4 5 K G D 5 PL 0.25 (0.010) T A M M B M INCHES MIN MAX 1.740 1.760 0.550 0.570 0.405 0.445 0.018 0.022 0.085 0.095 0.200 BSC 0.120 BSC 0.009 0.011 0.180 0.220 1.045 1.075 0.145 0.155 0.455 0.465 1.490 1.510 MILLIMETERS MIN MAX 44.20 44.70 13.97 14.49 10.29 11.30 0.46 0.55 2.16 2.41 5.08 BSC 3.05 BSC 0.23 0.28 4.57 5.59 26.54 27.30 3.68 3.94 11.56 11.81 37.85 38.35 C –T– E H J 5 PL 0.38 (0.015) M T A M B M STYLE 1: PIN 1. 2. 3. 4. 5. RF INPUT GROUND RESISTOR–GROUND VCC RF OUTPUT STYLE 2: PIN 1. 2. 3. 4. 5. RF INPUT GROUND VCC1 VCC2 RF OUTPUT CASE 448–02 ISSUE A MOTOROLA RF DEVICE DATA MHL8115 MHL8118 3 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 Mfax: [email protected] – TOUCHTONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET: http://motorola.com/sps MHL8115 MHL8118 4 ◊ MHL8115/D MOTOROLA RF DEVICE DATA