DATA SHEET GBPC35005W~GBPC3510W GBPC-W HIGH CURRENT SILICON BRIDGE RECTIFIER Unit: inch ( mm ) VOLTAGE - 50 to 1000 Volts CURRENT - 35 Amperes .042(1.07) .038(.97) .861(30.5) MIN FEATURES • Plastic material has Underwriters Laboratory Flammability Classification 94V-O .442(11.23) .432(10.97) • The plastic package has Underwriters Laboratory Flammability Classification 94V-O. METAL HEAT SINK • Surge overload ratings to 400 Amperes . .469(11.9) .429(10.9) MECHANICAL DATA AC Mounting position: Any .751(19.1) .673(17.1) Case:Molded plastic with heatsink integrally mounthed in the bringe encapsulation. Weight: 1 ounce, 30 grams _ AC EPOXY CASE .751(19.1) .673(17.1) “ W ” Sufflx Designates Wlre Leads No Sufflx Designates faston Terminals 1.129(28.7) 1.118(28.4) All Models are Available on B( Height)=7.62mm Max. Epoxy Case MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. GBPC 35005W GBPC 3501W GBPC 3502W GBPC 3504W GBPC 3506W GBPC 3508W GBPC 3510W UNIT Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Input Voltage 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V DC Output Voltage, Resistive load 30 62 124 250 380 505 630 V DC Output Voltage, Capacitive load 50 100 200 400 600 800 1000 V Maximum Average Forward Current For Resistive Load at TC=55°C 35 A Non-repetitive Peak Forward Surge Current at Rated Load 400 A 1.2 V Maximum Reverse Leakage Current at Rated @ TA=25°C Dc Blocking Voltage @ T A=100°C 10.0 1000 µA I2t Rating for fusing ( t<8.35ms) 664 A2S 2.0 °C / W Maximum Forward Voltage per Bridge Element at 17.5A Specified Current Typical Thermal Resistance per leg (Fig 3) RθJC Operating Temperature Range, TJ Storage Temperature Range, TA DATE : OCT.01.2002 -55 to +150 °C -55 to +150 °C PAGE . 1 RATING AND CHARACTERISTIC CURVES INSTANTANEOUS FORWARD CURRENT, AMPERES 1000 35 AVERAGE FORWARD CURRENT AMPERES 30 25 20 15 10 100 10 1.0 0.1 0.6 0.8 1.0 1.2 1.6 1.4 2.0 1.8 5 INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig. 2- TYPICAL INSTANTANEOUS FORWARDCHARACTERISITCS AT T J =25 C 0 60 25 80 100 120 140 160 O O CASE TEMPERATURE C Fig. 1- OUTPUT CURRENT VS.CASE TEMPERATURE RESISTIVE OR INDUCTIVE LOAD T J =150 C O 100 AVERAGE POWER DISSIPATION OF BRIDGE, WATTS 80 AVERAGE OUTPUT CURRENT ,AMPERES 35 30 25 20 15 10 60 40 30 20 10 8 6 4 5 0 25 60 80 100 120 140 160 180 O AMBIENT TEMPERATURE, T A C Fig. 3- OUTPUT CURRENT VS. AMBIENT TEMPERATURE RESISTIVE OR INDUCTIVE LOAD BRIDGE MOUNTED ON A 8" x 8" ALUMINUM PLATE 25"THICK DATE : OCT.01.2002 5 10 15 20 25 30 35 AVERGE OUTPUT CURRENT,AMPERES Fig. 4- POWER DISSIPATION VS.AVERAGE OUTPUT CURRENT RESISTIVE OR INDUCTIVE LOAD TJ=150 OC PAGE . 2