IM Vishay Dale Inductors Commercial, Molded FEATURES INDUCTANCE RANGE AND MILITARY STANDARD INDUCTANCE RANGE MODEL IM-1 IM-2 IM-4 IM-6 IM-8 IM-9 IM-10 RoHS COMPLIANT ELECTRICAL SPECIFICATIONS FROM TO 0.10 µH 0.022 µH 0.10 µH 1.2 µH 33 µH 0.15 µH 5.6 µH 36 µH 270 µH 0.10 µH 3.3 µH 33 µH 270 µH 1100 µH 68 µH 3900 µH 100 µH 0.082 µH 1 µH 27 µH 1000 µH 4.7 µH 33 µH 240 µH 1800 µH 2.7 µH 27 µH 220 µH 1000 µH 3600 µH 150 µH 10000 µH Inductance Tolerance: ± 1 %, ± 3 %, ± 5 %, ± 10 %, ± 20 % Other tolerances available on request. Insulation Resistance: 1000 Megohm minimum per MIL-STD-202, Method 302, Test Condition B Dielectric Strength: Per MIL-STD-202, Method 301: 1000 VAC for IM-2, -4, -6, -8, -9 and -10. 200 VAC for IM-1 MECHANICAL SPECIFICATIONS Terminal Strength: Per MIL-STD-202, Method 211, Test Condition A: For IM-1, 3 pounds pull For IM-2, -4, -6, -8, -9 and -10, 5 pounds pull and twist Weight: IM-1 = 0.25 gram maximum IM-2 = 0.30 gram maximum IM-4 = 0.65 gram maximum IM-6 = 0.95 gram maximum IM-8 = 1.5 gram maximum IM-9 = 2.0 gram maximum IM-10 = 2.5 gram maximum MATERIAL SPECIFICATIONS DIMENSIONS in inches [millimeters] C Typ. • Wide inductance range in small package • Flame retardant coating • Precision performance, excellent reliability, sturdy construction • Epoxy molded construction provides superior moisture protection B D Dia. Encapsulant: Epoxy Standard Terminals: IM-1 and IM-2, 24 AWG; IM-4, IM-6 and IM-9, 22 AWG; IM-8, 21 AWG; and IM-10, 20 AWG, tinned copper TEST EQUIPMENT* A Dia. MODEL A (Dia.) B C (Typ.) D (Dia.) IM-1 Max. 0.086 [2.18] 0.210 [5.33] 1.62 [41.15] 0.0215 [0.546] Min. 0.070 [1.78] 0.190 [4.83] 1.38 [35.05] 0.0185 [0.470] IM-2 Max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] Min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] IM-4 Max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] Min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] IM-6 Max. 0.200 [5.08] 0.450 [11.43] 1.63 [41.40] 0.027 [0.686] Min. 0.180 [4.57] 0.430 [10.92] 1.25 [31.75] 0.023 [0.584] IM-8 Max. 0.225 [5.72] 0.570 [14.48] 1.63 [41.40] 0.030 [0.762] Min. 0.205 [5.21] 0.550 [13.97] 1.25 [31.75] 0.026 [0.660] IM-9 Max. 0.260 [6.60] 0.570 [14.48] 1.63 [41.40] 0.027 [0.686] Min. 0.240 [6.10] 0.550 [13.97] 1.25 [31.75] 0.023 [0.584] IM-10 Max. 0.250 [6.35] 0.750 [19.05] 1.63 [41.40] 0.034 [0.864] Min. 0.230 [5.84] 0.730 [18.54] 1.25 [31.75] 0.030 [0.762] www.vishay.com 8 • H/P 4342A Q-Meter • Measurements Corporation Megacycle Meter, Model 59 • Wheatstone bridge * Test procedures per MIL-PRF-15305 ENVIRONMENTAL PERFORMANCE TEST Barometric Pressure Thermal Shock CONDITIONS SPECIFICATIONS Test Condition C MIL-STD-202, Method 105 MIL-STD-202, Method 107 MIL-STD-202, Method 111 MIL-PRF-15305 MIL-PRF-15305 Test Condition A-1 Flammability - Overload Low Temperature Storage Resistance to Soldering Heat Resistance to Solvents - For technical questions contact [email protected] Test Condition A - MIL-STD-202, Method 210 MIL-STD-202, Method 215 Document Number: 34030 Revision: 17-Feb-06 IM Inductors, Commercial, Molded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS SELF-RESONANT* FREQ. MIN. (MHz) DCR MAX. (Ohms) IM-1 0.10 ± 10 % 35 25.0 680.0 IM-1 0.12 ± 10 % 35 25.0 650.0 IM-1 0.15 ± 10 % 35 25.0 560.0 IM-1 0.18 ± 10 % 35 25.0 540.0 IM-1 0.22 ± 10 % 30 25.0 500.0 IM-1 0.27 ± 10 % 30 25.0 440.0 IM-1 0.33 ± 10 % 25 25.0 410.0 IM-1 0.39 ± 10 % 25 25.0 380.0 IM-1 0.47 ± 10 % 25 25.0 340.0 IM-1 0.56 ± 10 % 40 25.0 250.0 IM-1 0.68 ± 10 % 40 25.0 215.0 IM-1 0.82 ± 10 % 40 25.0 200.0 IM-1 1.0 ± 10 % 40 25.0 190.0 IM-1 1.2 ± 10 % 35 7.9 170.0 IM-1 1.5 ± 10 % 40 7.9 150.0 IM-1 1.8 ± 10 % 40 7.9 135.0 IM-1 2.2 ± 10 % 45 7.9 130.0 IM-1 2.7 ± 10 % 45 7.9 110.0 IM-1 3.3 ± 10 % 45 7.9 100.0 IM-1 3.9 ± 10 % 50 7.9 95.0 IM-1 4.7 ± 10 % 55 7.9 88.0 IM-1 5.6 ± 10 % 55 7.9 78.0 IM-1 6.8 ± 10 % 55 7.9 69.0 IM-1 8.2 ± 10 % 45 7.9 52.0 IM-1 10.0 ± 10 % 45 7.9 47.0 IM-1 12.0 ± 10 % 40 2.5 31.0 IM-1 15.0 ± 10 % 40 2.5 26.0 IM-1 18.0 ± 10 % 40 2.5 23.0 IM-1 22.0 ± 10 % 45 2.5 20.0 IM-1 27.0 ± 10 % 45 2.5 17.0 IM-1 33.0 ± 10 % 45 2.5 15.0 IM-1 39.0 ± 10 % 45 2.5 13.5 IM-1 47.0 ± 10 % 45 2.5 12.5 IM-1 56.0 ± 10 % 45 2.5 11.5 IM-1 68.0 ± 10 % 45 2.5 10.5 IM-1 82.0 ± 10 % 45 2.5 10.0 IM-1 100.0 ± 10 % 45 2.5 9.5 IM-2 0.022 ± 20 % 50 50.0 900.0 IM-2 0.027 ± 10 % 40 25.0 875.0 IM-2 0.033 ± 10 % 40 25.0 850.0 IM-2 0.039 ± 10 % 40 25.0 825.0 IM-2 0.047 ± 10 % 40 25.0 800.0 IM-2 0.056 ± 10 % 40 25.0 775.0 IM-2 0.068 ± 10 % 40 25.0 750.0 IM-2 0.082 ± 10 % 40 25.0 725.0 IM-2 0.10 ± 10 % 40 25.0 680.0 IM-2 0.12 ± 10 % 40 25.0 640.0 IM-2 0.15 ± 10 % 38 25.0 600.0 IM-2 0.18 ± 10 % 35 25.0 550.0 IM-2 0.22 ± 10 % 33 25.0 510.0 IM-2 0.27 ± 10 % 33 25.0 430.0 IM-2 0.33 ± 10 % 30 25.0 410.0 IM-2 0.39 ± 10 % 30 25.0 365.0 IM-2 0.47 ± 10 % 30 25.0 330.0 IM-2 0.56 ± 10 % 30 25.0 300.0 IM-2 0.68 ± 10 % 28 25.0 275.0 IM-2 0.82 ± 10 % 28 25.0 250.0 IM-2 1.0 ± 10 % 25 25.0 230.0 IM-2 1.2 ± 10 % 25 7.9 150.0 IM-2 1.5 ± 10 % 28 7.9 140.0 IM-2 1.8 ± 10 % 30 7.9 125.0 IM-2 2.2 ± 10 % 30 7.9 115.0 IM-2 2.7 ± 10 % 37 7.9 100.0 IM-2 3.3 ± 10 % 45 7.9 90.0 IM-2 3.9 ± 10 % 45 7.9 80.0 IM-2 4.7 ± 10 % 45 7.9 75.0 * Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table. Document Number: 34030 Revision: 17-Feb-06 For technical questions contact [email protected] 0.13 0.15 0.18 0.21 0.25 0.38 0.49 0.59 0.62 0.18 0.20 0.22 0.25 0.28 0.49 0.56 0.72 0.85 1.2 1.5 2.1 2.8 3.2 4.4 5.2 3.0 3.4 3.8 4.3 4.7 5.2 6.8 8.2 10.0 11.5 16.0 17.5 0.025 0.03 0.035 0.04 0.045 0.05 0.06 0.07 0.08 0.09 0.10 0.12 0.14 0.16 0.22 0.30 0.35 0.50 0.60 0.85 1.0 0.18 0.22 0.30 0.40 0.55 0.85 1.0 1.2 RATED** DC CURRENT (mA) 895 835 760 705 645 525 460 420 410 510 485 465 435 410 310 290 257 236 198 178 150 130 122 104 95 126 118 112 105 100 95 83.5 76 69 64 54.5 52 2400 2200 2000 1900 1800 1700 1500 1400 1350 1270 1200 1105 1025 960 815 700 650 545 495 415 385 590 535 455 395 355 270 250 230 PHENOLIC CORE TEST FREQ. L & Q (MHz) IRON CORE Q MIN. PHENOLIC CORE TOL. PHENOLIC CORE IND. (µH) IRON CORE MODEL www.vishay.com 9 IM Inductors, Commercial, Molded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS TEST FREQ. L & Q (MHz) SELF-RESONANT* FREQ. MIN. (MHz) DCR MAX. (Ohms) IM-2 5.6 ± 10 % 50 7.9 65.0 IM-2 6.8 ± 10 % 50 7.9 60.0 IM-2 8.2 ± 10 % 55 7.9 55.0 IM-2 10.0 ± 10 % 55 7.9 50.0 IM-2 12.0 ± 10 % 45 2.5 40.0 IM-2 15.0 ± 10 % 40 2.5 35.0 IM-2 18.0 ± 10 % 50 2.5 30.0 IM-2 22.0 ± 10 % 50 2.5 25.0 IM-2 27.0 ± 10 % 50 2.5 20.0 IM-2 33.0 ± 10 % 45 2.5 24.0 IM-2 39.0 ± 10 % 45 2.5 22.0 IM-2 47.0 ± 10 % 45 2.5 20.0 IM-2 56.0 ± 10 % 45 2.5 18.0 IM-2 68.0 ± 10 % 50 2.5 15.0 IM-2 82.0 ± 10 % 50 2.5 14.0 IM-2 100.0 ± 10 % 50 2.5 13.0 IM-2 120.0 ± 10 % 30 0.79 12.0 IM-2 150.0 ± 10 % 30 0.79 11.0 IM-2 180.0 ± 10 % 30 0.79 10.0 IM-2 220.0 ± 10 % 30 0.79 9.0 IM-2 270.0 ± 10 % 30 0.79 8.0 IM-2 330.0 ± 10 % 30 0.79 7.0 IM-2 390.0 ± 10 % 30 0.79 6.5 IM-2 470.0 ± 10 % 30 0.79 6.0 IM-2 560.0 ± 10 % 30 0.79 5.0 IM-2 680.0 ± 10 % 30 0.79 4.0 IM-2 820.0 ± 10 % 30 0.79 3.8 IM-2 1000.0 ± 10 % 30 0.79 3.4 IM-4 0.15 ± 20 % 50 25 525.0 IM-4 0.22 ± 20 % 50 25 450.0 IM-4 0.33 ± 20 % 45 25 360.0 IM-4 0.47 ± 20 % 45 25 310.0 IM-4 0.56 ± 10 % 50 25 280.0 IM-4 0.68 ± 10 % 50 25 250.0 IM-4 0.82 ± 10 % 50 25 220.0 IM-4 1.0 ± 10 % 50 25 200.0 IM-4 1.2 ± 10 % 33 7.9 180.0 IM-4 1.5 ± 10 % 33 7.9 160.0 IM-4 1.8 ± 10 % 33 7.9 150.0 IM-4 2.2 ± 10 % 33 7.9 135.0 IM-4 2.7 ± 10 % 33 7.9 120.0 IM-4 3.3 ± 10 % 33 7.9 110.0 IM-4 3.9 ± 10 % 33 7.9 100.0 IM-4 4.7 ± 10 % 33 7.9 90.0 IM-4 5.6 ± 10 % 45 7.9 60.0 IM-4 6.8 ± 10 % 50 7.9 55.0 IM-4 8.2 ± 10 % 50 7.9 50.0 IM-4 10.0 ± 10 % 55 7.9 45.0 IM-4 12.0 ± 10 % 65 2.5 42.0 IM-4 15.0 ± 10 % 65 2.5 40.0 IM-4 18.0 ± 10 % 75 2.5 34.0 IM-4 22.0 ± 10 % 75 2.5 30.0 IM-4 27.0 ± 10 % 60 2.5 25.0 IM-4 33.0 ± 10 % 65 2.5 19.0 * Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table. www.vishay.com 10 For technical questions contact [email protected] 1.8 2.0 2.7 3.7 2.7 2.8 3.1 3.3 3.5 3.4 3.6 4.5 5.7 6.7 7.3 8 13 15 17 21 25 28 35 42 46 60 65 72 0.03 0.055 0.09 0.12 0.135 0.15 0.22 0.29 0.42 0.50 0.65 0.95 1.20 2.0 2.30 2.60 0.32 0.50 0.60 0.90 1.10 1.40 2.25 2.50 2.60 3.0 RATED** DC CURRENT (mA) 185 175 155 130 155 150 145 140 135 130 125 110 100 92 88 84 66 61 57 52 47 45 40 36 35 30 29 28 2450 1810 1400 1225 1150 1100 900 785 650 600 525 435 385 300 280 260 495 395 360 290 265 240 185 175 170 165 IRON CORE Q MIN. FERRITE CORE TOL. PHENOLIC CORE IND. (µH) IRON CORE MODEL Document Number: 34030 Revision: 17-Feb-06 IM Inductors, Commercial, Molded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS TOL. Q MIN. TEST FREQ. L & Q (MHz) SELF-RESONANT* FREQ. MIN. (MHz) DCR MAX. (Ohms) IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-4 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 36.0 39.0 43.0 47.0 51.0 56.0 62.0 68.0 75.0 82.0 91.0 100.0 110.0 120.0 130.0 150.0 160.0 180.0 200.0 220.0 240.0 270.0 300.0 330.0 360.0 390.0 430.0 470.0 510.0 560.0 620.0 680.0 750.0 820.0 910.0 1000.0 1100.0 1200.0 1300.0 1500.0 1600.0 1800.0 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % 60 60 60 55 55 55 55 55 55 50 50 50 60 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 55 55 55 55 55 30 30 30 30 30 30 55 55 55 55 50 50 50 50 50 50 45 40 40 30 30 30 30 30 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.25 0.25 0.25 0.25 0.25 0.25 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 7.9 7.9 7.9 7.9 7.9 15.5 14.5 13.7 13.0 12.7 12.0 11.5 11.0 10.5 10.3 10.0 9.5 8.9 8.7 8.5 8.0 7.5 7.0 6.5 6.2 5.9 5.7 5.4 5.1 4.8 4.5 4.2 3.9 3.7 3.5 3.3 3.1 2.9 2.7 2.5 2.3 2.1 2.0 1.9 1.8 1.7 1.6 510.0 510.0 510.0 450.0 415.0 380.0 350.0 320.0 300.0 270.0 250.0 210.0 200.0 180.0 170.0 150.0 140.0 120.0 2.50 2.60 2.70 2.75 2.85 3.00 3.15 3.30 3.70 3.90 4.30 4.50 4.90 5.20 5.45 6.05 6.40 6.75 7.10 7.45 7.80 11.0 11.5 12.0 15.5 16.3 17.1 17.9 18.8 24.7 25.9 27.2 28.6 30.0 31.5 33.1 43.5 45.7 49.0 52.5 54.0 56.7 0.020 0.025 0.030 0.030 0.035 0.050 0.065 0.080 0.085 0.125 0.150 0.205 0.290 0.400 0.485 0.740 0.970 1.20 RATED** DC CURRENT (mA) 180 176 172 170 167 164 160 156 147 143 136 133 128 124 121 114 111 108 106 103 101 129 125 123 108 105 102 100 98 85 83 81 79 77 76 74 64 63 61 59 58 56 3600 3300 3000 2900 2800 2400 2000 1800 1700 1450 1300 1100 930 785 700 580 505 460 IRON CORE IND. (µH) PHENOLIC CORE MODEL * Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table. Document Number: 34030 Revision: 17-Feb-06 For technical questions contact [email protected] www.vishay.com 11 IM Inductors, Commercial, Molded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS Q MIN. TEST FREQ. L & Q (MHz) SELF-RESONANT* FREQ. MIN. (MHz) DCR MAX. (Ohms) IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-6 IM-8 IM-8 IM-8 IM-8 IM-8 IM-8 IM-8 IM-8 IM-8 IM-8 IM-8 IM-8 IM-8 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 300.0 330.0 360.0 390.0 430.0 470.0 510.0 560.0 620.0 680.0 750.0 820.0 910.0 1000.0 1100.0 1200.0 1300.0 1500.0 1600.0 1800.0 2000.0 2200.0 2400.0 2700.0 3000.0 3300.0 3600.0 ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 30 30 30 30 30 30 30 50 55 60 60 65 75 75 75 75 75 75 65 65 65 65 65 65 65 65 65 65 65 65 65 65 60 60 60 60 60 60 60 60 60 65 65 65 65 70 70 70 70 70 70 LT10K 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 70.0 65.0 60.0 50.0 50.0 48.0 42.0 36.0 30.0 30.0 24.0 22.0 20.0 18.0 16.0 15.0 12.0 10.0 8.0 6.0 5.4 5.0 4.7 5.6 5.3 5.0 4.7 4.5 4.3 4.0 3.8 3.6 3.5 3.4 3.3 3.1 2.9 2.8 2.8 2.7 2.6 2.4 2.3 2.2 2.1 2.0 1.9 1.8 1.7 1.6 1.5 0.140 0.155 0.210 0.280 0.375 0.440 0.605 1.05 1.20 1.95 2.20 2.75 3.5 3.8 4.0 4.4 4.7 5.3 6.0 5.0 5.8 6.6 7.4 8.2 8.7 9.1 9.6 10.0 10.6 11.1 11.6 12.3 13.0 13.7 14.4 15.1 15.8 16.5 21.0 22.0 23.0 25.0 26.0 28.0 29.0 30.0 31.0 33.0 35.0 38.0 40.0 RATED** DC CURRENT (mA) 990 870 745 645 560 540 440 370 310 255 240 205 185 176 170 164 156 143 133 124 118 114 112 110 107 105 102 100 97 95 93 91 88 85 83 81 79 78 78 76 75 72 70 68 67 66 64 62 61 58 57 IRON CORE TOL. IRON CORE IND. (µH) IRON CORE MODEL * Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table. www.vishay.com 12 For technical questions contact [email protected] Document Number: 34030 Revision: 17-Feb-06 IM Inductors, Commercial, Molded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS TOL. Q MIN. TEST FREQ. L & Q (MHz) SELF-RESONANT* FREQ. MIN. (MHz) DCR MAX. (Ohms) IM-9 IM-9 IM-9 IM-9 IM-9 IM-10 IM-10 IM-10 IM-10 IM-10 IM-10 IM-10 IM-10 IM-10 IM-10 IM-10 68.0 82.0 100.0 120.0 150.0 3900.0 4300.0 4700.0 5000.0 5600.0 6200.0 6800.0 7500.0 8200.0 9100.0 10000.0 ± 10% ± 10% ± 10% ± 10% ± 10% ± 5% ± 5% ± 5% ± 5% ± 5% ± 5% ± 5% ± 5% ± 5% ± 5% ± 5% 70 65 65 75 75 80 80 80 80 80 80 80 80 80 80 80 2.5 2.5 2.5 0.79 0.79 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 13.0 11.7 10.7 9.3 8.3 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 1.05 1.00 0.95 3.3 3.5 3.8 4.7 5.3 44.0 46.0 48.0 50.0 53.0 56.0 59.0 62.0 65.0 68.0 72.0 RATED** DC CURRENT (mA) 168 162 155 142 132 61 59 58 57 56 54 52 51 50 49 47 IRON CORE IND. (µH) IRON CORE MODEL * Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table. MAXIMUM TEMPERATURE RISE IM-1 OPERATING TEMPERATURE RANGE - 55 °C to + 125 °C 0.10 µH to .47 µH = 35 °C at + 90 °C ambient IM-2 0.56 µH to 1000 µH = 15 °C at + 90 °C ambient - 55 °C to + 105 °C 0.022 µH to 1.0 µH = 35 °C at + 90 °C ambient - 55 °C to + 125 °C IM-4 1.2 µH to 27 µH = 15 °C at + 90 °C ambient - 55 °C to + 105 °C 33 µH to 1000 µH = 15 °C at + 90 °C ambient - 55 °C to + 105 °C 0.15 µH to 4.7 µH = 35 °C at + 90 °C ambient - 55 °C to + 125 °C 5.6 µH to 33 µH = 15 °C at + 90 °C ambient - 55 °C to + 105 °C 36 µH to 240 µH = 15 °C at + 90 °C ambient - 55 °C to + 105 °C 270 µH to 1800 µH = 35 °C at + 90 °C ambient - 55 °C to + 125 °C 0.1 µH to 2.7 µH = 35 °C at + 90 °C ambient - 55 °C to + 125 °C 3.3 µH to 1000 µH = 15 °C at + 90 °C ambient - 55 °C to + 105 °C = 15 °C at + 90 °C ambient - 55 °C to + 105 °C IM-6 IM-8, IM-9, IM-10 DESCRIPTION IM-2 10 µH ± 10 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER INFORMATION I M 0 MODEL Document Number: 34030 Revision: 17-Feb-06 2 E R PACKING CODE 1 0 0 INDUCTANCE VALUE For technical questions contact [email protected] K TOL. www.vishay.com 13 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1