IMS-2 Vishay Dale Inductors, Commercial, Molded, Shielded, Miniature, Axial Leaded FEATURES • Flame retardant coating • Electromagnetic shield ELECTRICAL SPECIFICATIONS • Small package for a shielded inductor Inductance Tolerance: ± 10 % standard, ± 5 % available Insulation Resistance: 1000 M minimum MIL-STD-202, method 302, test condition B per • Epoxy molded construction provides superior moisture protection Dielectric Withstanding Voltage: MIL-STD-202, method 301 (at sea level) per • Precision performance, construction 200 VAC excellent reliability, sturdy • Compliant to RoHS Directive 2002/95/EC Percent Coupling: 3 % maximum per MIL-PRF-15305 MECHANICAL SPECIFICATIONS Operating Temperature: - 55 °C to + 105 °C ENVIRONMENTAL PERFORMANCE Terminal Strength: 3 lb pull per MIL-STD-202, method 211, test condition A, except 180° rotation for a total of 540° TEST Weight: IMS-2 = 0.30 g maximum CONDITIONS SPECIFICATIONS C MIL-STD-202, method 105 TEST EQUIPMENT Barometric Pressure (1) A-1 MIL-STD-202, method 107 • H/P 4342A Q-meter Flammability - MIL-STD-202, method 111 • Measurements corporation megacycle meter, model 59 Overload - MIL-PRF-15305 • Wheatstone bridge Low Temperature Storage - MIL-PRF-15305 Note (1) Test procedure per MIL-PRF-15305 Resistance to Soldering Heat A MIL-STD-202, method 210 MATERIAL SPECIFICATIONS Resistance to Solvents - MIL-STD-202, method 215 Encapsulant: Epoxy Thermal Shock Standard Terminals: #24 AWG, tinned copper DIMENSIONS in inches [millimeters] 1.50 ± 0.120 [38.10 ± 3.05] 0.250 ± 0.010 [6.35 ± 0.254] 0.095 ± 0.010 [2.41 ± 0.254] 0.020 ± 0.0015 [0.508 ± 0.038] IND. TOL. Q TEST FREQUENCY L AND Q MODEL (μH) (%) MIN. (MHz) IMS-2 0.10 ± 10 54 25.0 IMS-2 0.12 ± 10 52 25.0 IMS-2 0.15 ± 10 50 25.0 IMS-2 0.18 ± 10 49 25.0 IMS-2 0.22 ± 10 47 25.0 IMS-2 0.27 ± 10 46 25.0 IMS-2 0.33 ± 10 44 25.0 IMS-2 0.39 ± 10 42 25.0 IMS-2 0.47 ± 10 41 25.0 IMS-2 0.56 ± 10 41 25.0 IMS-2 0.68 ± 10 39 25.0 IMS-2 0.82 ± 10 38 25.0 IMS-2 1.0 ± 10 37 25.0 Notes (1) Measured with full length lead (2) Rated DC current based on maximum temperature rise as shown in table Document Number: 34045 Revision: 24-May-11 SRF MIN. (MHz) (1) 490.0 430.0 415.0 375.0 330.0 300.0 260.0 230.0 220.0 210.0 180.0 165.0 150.0 DCR MAX. () 0.10 0.11 0.12 0.13 0.15 0.16 0.18 0.19 0.21 0.23 0.24 0.27 0.30 For technical questions, contact: [email protected] RATED DC CURRENT (mA) (2) 670 635 610 585 545 530 495 485 460 440 430 405 385 IRON CORE STANDARD ELECTRICAL SPECIFICATIONS www.vishay.com 29 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IMS-2 Inductors, Commercial, Molded, Shielded, Miniature, Axial Leaded Vishay Dale IND. TOL. Q TEST FREQUENCY L AND Q MODEL (μH) (%) MIN. (MHz) IMS-2 1.2 ± 10 40 7.9 IMS-2 1.5 ± 10 41 7.9 IMS-2 1.8 ± 10 43 7.9 IMS-2 2.2 ± 10 45 7.9 IMS-2 2.7 ± 10 48 7.9 IMS-2 3.3 ± 10 49 7.9 IMS-2 3.9 ± 10 50 7.9 IMS-2 4.7 ± 10 53 7.9 IMS-2 5.6 ± 10 54 7.9 IMS-2 6.8 ± 10 55 7.9 IMS-2 8.2 ± 10 55 7.9 IMS-2 10.0 ± 10 57 7.9 IMS-2 12.0 ± 10 36 2.5 IMS-2 15.0 ± 10 38 2.5 IMS-2 18.0 ± 10 40 2.5 IMS-2 22.0 ± 10 40 2.5 IMS-2 27.0 ± 10 40 2.5 IMS-2 33.0 ± 10 41 2.5 IMS-2 39.0 ± 10 42 2.5 IMS-2 47.0 ± 10 44 2.5 IMS-2 56.0 ± 10 44 2.5 IMS-2 68.0 ± 10 45 2.5 IMS-2 82.0 ± 10 45 2.5 IMS-2 100.0 ± 10 40 2.5 Notes (1) Measured with full length lead (2) Rated DC current based on maximum temperature rise as shown in table SRF MIN. (MHz) (1) 130.0 115.0 105.0 95.0 90.0 80.0 75.0 70.0 60.0 55.0 53.0 50.0 35.0 30.0 26.0 24.0 21.0 20.0 19.0 16.0 15.0 13.0 11.0 10.5 DCR MAX. () 0.73 0.86 0.95 1.1 1.2 1.3 1.5 2.4 2.9 3.2 3.6 4.0 3.0 3.4 3.8 4.9 5.8 6.5 7.9 9.3 11.0 12.0 13.0 16.8 RATED DC CURRENT (mA) (2) 247 228 217 202 193 185 173 136 124 118 111 106 122 115 108 96 88 83 75 69 64 61 59 51 IRON CORE STANDARD ELECTRICAL SPECIFICATIONS ORDERING INFORMATION IMS-2 10 μH ± 10 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M S MODEL www.vishay.com 30 0 2 E R PACKAGE CODE 1 0 INDUCTANCE VALUE For technical questions, contact: [email protected] 0 K INDUCTANCE TOLERANCE Document Number: 34045 Revision: 24-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000