20TQ...SPbF Vishay High Power Products Schottky Rectifier, 20 A FEATURES • 150 °C TJ operation D2PAK Available • Low forward voltage drop Base cathode 2 RoHS* • High frequency operation COMPLIANT • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance 1 N/C • Guard ring for enhanced ruggedness and long term reliability 3 Anode • Lead (Pb)-free (“PbF” suffix) • Designed and qualified for Q101 level DESCRIPTION PRODUCT SUMMARY IF(AV) 20 A VR 35 to 45 V The 20TQ.. Schottky rectifier series has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) Rectangular waveform VRRM Range IFSM VF TJ Range VALUES UNITS 20 A 35 to 45 V tp = 5 µs sine 1800 A 20 Apk, TJ = 125 °C 0.51 V - 55 to 150 °C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage Maximum working peak reverse voltage VR VRWM 20TQ035SPbF 20TQ040SPbF 20TQ045SPbF UNITS 35 40 45 V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current See fig. 5 IF(AV) Maximum peak one cycle non-repetitive surge current See fig. 7 IFSM Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 4 A, L = 3.40 mH 27 mJ IAR Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical 4 A Repetitive avalanche current 50 % duty cycle at TC = 116 °C, rectangular waveform 5 µs sine or 3 µs rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied 20 1800 A 400 * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94168 Revision: 14-Aug-08 For technical questions, contact: [email protected] www.vishay.com 1 20TQ...SPbF Schottky Rectifier, 20 A Vishay High Power Products ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 20 A Maximum forward voltage drop See fig. 1 VFM (1) 20 A IRM (1) 0.73 0.67 2.7 VR = Rated VR TJ = 125 °C Maximum junction capacitance CT VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C LS Measured lead to lead 5 mm from package body dV/dt mA 105 Typical series inductance Maximum voltage rate of change V 0.51 TJ = 125 °C TJ = 25 °C UNITS 0.57 TJ = 25 °C 40 A 40 A Maximum reverse leakage current See fig. 2 VALUES Rated VR 1400 pF 8.0 nH 10 000 V/µs Note (1) Pulse width < 300 µs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS - 55 to 150 °C Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to case RthJC DC operation See fig. 4 1.50 Typical thermal resistance, case to heatsink RthCS Mounting surface, smooth and greased 0.50 2 g 0.07 oz. minimum 6 (5) kgf ⋅ cm maximum 12 (10) (lbf ⋅ in) Approximate weight Mounting torque Marking device www.vishay.com 2 °C/W Case style D2PAK For technical questions, contact: [email protected] 20TQ045S Document Number: 94168 Revision: 14-Aug-08 20TQ...SPbF Schottky Rectifier, 20 A 1000 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 1000 Vishay High Power Products 100 TJ = 150 °C TJ = 125 °C TJ = 25 °C 10 1 0.1 TJ = 150 °C 100 TJ = 125 °C 10 TJ = 100 °C 1 TJ = 75 °C TJ = 50 °C 0.1 TJ = 25 °C 0.01 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1.8 5 10 15 20 25 30 35 40 45 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 10 000 TJ = 25 °C 100 0 10 20 30 40 50 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM 0.1 t1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 0.01 Single pulse (thermal resistance) 0.001 0.00001 0.0001 0.001 0.01 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94168 Revision: 14-Aug-08 For technical questions, contact: [email protected] www.vishay.com 3 20TQ...SPbF Schottky Rectifier, 20 A Vishay High Power Products 18 D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 16 20TQ RthJC (DC) = 1.50 °C/W Average Power Loss (W) Allowable Case Temperature (°C) 155 145 135 DC 125 14 12 10 RMS limit 8 6 DC 4 2 0 115 0 5 10 15 20 0 30 25 5 10 15 20 25 30 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 10 000 At any rated load condition and with rated VRRM applied following surge 1000 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current L D.U.T. IRFP460 Rg = 25 Ω Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94168 Revision: 14-Aug-08 20TQ...SPbF Schottky Rectifier, 20 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 20 T Q 045 S 1 2 3 4 5 1 - Current rating (20 A) 2 - Package: TRL PbF 6 7 T = TO-220 3 - Schottky “Q” series 4 - Voltage ratings 5 - S = D2PAK 6 - None = Tube (50 pieces) 035 = 35 V 040 = 40 V 045 = 45 V TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented) 7 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95014 Part marking information http://www.vishay.com/doc?95008 Packaging information http://www.vishay.com/doc?95032 Document Number: 94168 Revision: 14-Aug-08 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1