VISHAY STPS20L15GTRR

STPS20L15GPbF
Vishay High Power Products
Schottky Rectifier, 20 A
FEATURES
•
•
•
•
•
•
Base
cathode
2
3
Anode
1
D2PAK
N/C
125 °C TJ operation (VR < 5 V)
Pb-free
Center tap module
Available
Optimized for OR-ing applications
RoHS*
Ultra low forward voltage drop
COMPLIANT
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
• High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
• Lead (Pb)-free (“PbF” suffix)
• Designed and qualified for Q101 level
DESCRIPTION
PRODUCT SUMMARY
IF(AV)
20 A
VR
15 V
IRM
600 mA at 100 °C
The Schottky rectifier module has been optimized for
ultra low forward voltage drop specifically for the OR-ing
of parallel power supplies. The proprietary barrier
technology allows for reliable operation up to 125 °C
junction temperature. Typical applications are in parallel
switching power supplies, converters, reverse battery
protection, and redundant power subsystems.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
CHARACTERISTICS
VALUES
UNITS
20
A
15
V
Rectangular waveform
VRRM
IFSM
tp = 5 µs sine
700
A
VF
19 Apk, TJ = 125 °C (typical)
0.25
V
TJ
Range
- 55 to 125
°C
STPS20L15GPbF
UNITS
15
V
VOLTAGE RATINGS
PARAMETER
Maximum DC reverse voltage
Maximum working peak reverse voltage
SYMBOL
VR
VRWM
TEST CONDITIONS
TJ = 100 °C
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum average forward current
See fig. 5
IF(AV)
Maximum peak one cycle
non-repetitive surge current
See fig. 7
IFSM
Non-repetitive avalanche energy
EAS
TJ = 25 °C, IAS = 2 A, L = 6 mH
10
mJ
Repetitive avalanche current
IAR
Current decaying linearly to zero in 1 µs
Frequency limited by TJ maximum VA = 1.5 x VR typical
2
A
50 % duty cycle at TC = 85 °C, rectangular waveform
5 µs sine or 3 µs rect. pulse
10 ms sine or 6 ms rect. pulse
Following any rated load
condition and with rated
VRRM applied
20
700
A
330
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 94326
Revision: 15-Aug-08
For technical questions, contact: [email protected]
www.vishay.com
1
STPS20L15GPbF
Vishay High Power Products
Schottky Rectifier, 20 A
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
19 A
Forward voltage drop
See fig. 1
VFM (1)
TJ = 25 °C
40 A
19 A
TJ = 125 °C
40 A
Reverse leakage current
See fig. 2
IRM (1)
Threshold voltage
VF (TO)
Forward slope resistance
rt
Maximum junction capacitance
CT
Typical series inductance
LS
Maximum voltage rate of change
dV/dt
TJ = 25 °C
VR = Rated VR
TJ = 100 °C
TYP.
-
0.41
-
0.52
0.25
0.33
0.37
0.50
-
10
-
600
TJ = TJ maximum
VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C
-
Measured lead to lead 5 mm from package body
8
Rated VR
MAX.
UNITS
V
mA
0.182
V
7.6
mΩ
2000
pF
-
nH
10 000
V/µs
Note
(1) Pulse width < 300 µs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
Maximum junction temperature range
TJ
- 55 to 125
Maximum storage temperature range
TStg
- 55 to 150
Maximum thermal resistance,
junction to case
RthJC
DC operation
See fig. 4
1.5
Typical thermal resistance,
case to heatsink
RthCS
Mounting surface, smooth and greased (for TO-220)
0.50
Maximum thermal resistance,
junction to ambient
RthJA
DC operation (for D2PAK)
Approximate weight
Mounting torque
Marking device
www.vishay.com
2
minimum
maximum
Non-lubricated threads
Case style D2PAK
For technical questions, contact: [email protected]
UNITS
°C
°C/W
40
2
g
0.07
oz.
6 (5)
kgf · cm
(lbf · in)
12 (10)
STPS20L15G
Document Number: 94326
Revision: 15-Aug-08
STPS20L15GPbF
Schottky Rectifier, 20 A
1000
IR - Reverse Current (mA)
1000
IF - Instantaneous
Forward Current (A)
Vishay High Power Products
100
TJ = 125 °C
TJ = 75 °C
TJ = 25 °C
10
TJ = 100 °C
100
TJ = 75 °C
10
TJ = 50 °C
TJ = 25 °C
1
0.1
1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0
1.6
3
6
9
12
15
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
CT - Junction Capacitance (pF)
10 000
TJ = 25 °C
1000
100
0
5
10
15
20
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage
10
1
PDM
0.1
Single pulse
(thermal resistance)
0.01
0.00001
0.0001
0.001
t1
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
0.01
t2
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
0.1
1
10
100
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 94326
Revision: 15-Aug-08
For technical questions, contact: [email protected]
www.vishay.com
3
STPS20L15GPbF
Schottky Rectifier, 20 A
100
14
95
12
Average Power Loss (W)
Allowable Case Temperature (°C)
Vishay High Power Products
90
85
Square wave (D = 0.50)
80
75
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
10
8
RMS limit
6
4
DC
2
See note (1)
70
0
0
4
8
12
16
20
0
24
5
10
15
20
25
30
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
1000
At any rated load condition
and with rated VRRM applied
following surge
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current
L
D.U.T.
IRFP460
Rg = 25 Ω
Current
monitor
High-speed
switch
Freewheel
diode
+ Vd = 25 V
40HFL40S02
Fig. 8 - Unclamped Inductive Test Circuit
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 94326
Revision: 15-Aug-08
STPS20L15GPbF
Schottky Rectifier, 20 A
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
STPS
20
L
15
G
1
2
3
4
5
TRL PbF
6
7
1
2
3
4
5
6
-
Essential part number
Current rating (20 = 20 A)
Low voltage
Voltage rating (15 = 15 V)
G = D2PAK package
-
7
-
None = Tube (50 pieces)
TRL = Tape and reel (left oriented)
TRR = Tape and reel (right oriented)
None = Standard production
PbF = Lead (Pb)-free (for D2PAK tube)
P = Lead (Pb)-free (for D2PAK TRR and TRL)
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95046
Part marking information
http://www.vishay.com/doc?95054
Packaging information
http://www.vishay.com/doc?95032
Document Number: 94326
Revision: 15-Aug-08
For technical questions, contact: [email protected]
www.vishay.com
5
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1