Ordering number: EN2621A Monolithic Linear IC LA6520 3-Output Power Operational Amplifier Overview Package Dimensions The LA6520 is a 3-output power OP amp designed for use in consumer, industrial applications. unit : mm 3022A-DIP12F [LA6520] Features . High output current (Io = 0.5 A) . High gain . With current limiter . Wide operating voltage range (±2 to ±18 V) . Capable of being operated from single supply (4 to 36V) . On-chip thermal shutdown SANYO : DIP12F Specification Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit Maximum supply voltage VCC/VEE ±18 V Differential input voltage VIDIf 30 V Common-mode input voltage VICOM ±15 V Allowable power dissipation Pd max 1.9 W Operating temperature Topr –20 to +75 °C Storage temperature Tstg –55 to +150 °C Operating Characteristics at Ta = 25°C, VCC/VEE = ± 15 V Parameter Quiescent current dissipation Input offset voltage Input offset current Input bias current Common-mode input voltage range Common-mode rejection Maximum output voltage Voltage gain Slew rate Supply voltage rejection Limiting current (On-chip limiter) Symbol ICCO VIO IIO IB Conditions Rs % 10 kΩ VICM CMR Vo VGO SR SVR ISC min typ 20 2 10 50 –15 RL = 33 Ω GV = 0, RL = 33 Ω, R = 10 Ω, L = 0.1 µF 80 ±12 85 0.15 30 0.5 max Unit mA mV nA nA +13 V dB V dB V/µs µV/V A SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 32896HA(II)/7297TA,TS No.2621-1/2 LA6520 Allowable power dissipation, Pd max – W Pin Assignment Fe plate (Fin 1) Fe plate (Fin 1) Fe plate (Fin 2) PCB only IC only Ambient temperature, Ta – °C No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: 1 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: 2 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 1996. Specifications and information herein are subject to change without notice. No.2621-2/2