SANYO LB1213M

Ordering number: EN1354C
Monolithic Digital IC
LB1213M
General-Purpose Transistor Array
Package Dimensions
Overview
The LB1213M is a general-purpose transistor array containing
7 channels. It is especially suited for driving LEDs, lamps,
small-sized relays, etc.
unit : mm
3035A-MFP16
[LB1213M]
Features
. Common-emitter 7 channels.
. Built-in base current limiting resistors.
. Capable of being direct driven with TTL, CMOS, PMOS,
. etc.
operating voltage and temperature ranges
. Wide
Miniflat package permitting sets to be small-sized.
SANYO: MFP16
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Output supply voltage
VOUT
Output current
IOUT
Input supply voltage
Allowable power dissipation
Conditions
Rating
Per unit
Unit
20
V
100
mA
VIN
10
V
Pd max
330
mW
Operating temperature
Topr
–20 to +75
°C
Storage temperature
Tstg
–40 to +125
°C
Electrical Characteristics at Ta = 25°C
Parameter
Output voltage
Input current
Symbol
Conditions
min
typ
max
Unit
V
VOUT 1
VIN = 5 V, IOUT = 5 mA
0.1
VOUT 2
VIN = 5 V, IOUT = 50 mA
0.5
V
2.3
mA
IIN
IIN = 5 V
1.6
Output sustain voltage
VO(SUS)
Output leakage current
IOFF
VIN = 0 V, VOUT = 20 V
DC current amplification factor
hFE
VOUT = 10 V, IOUT = 2 mA
IOUT = 50 mA
20
V
10
50
µA
500
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
93097HA(II)/7067KI/7315KI/9133KI,TS No.1354-1/2
LB1213M
Allowable power dissipation, Pd max – mW
Equivalent Circuit
Pd max – Ta
Ambient temperature, Ta – °C
No products described or contained herein are intended for use in surgical implants, life-support systems,
aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like,
the failure of which may directly or indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
1 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation
and all damages, cost and expenses associated with such use:
2 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees
jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for
volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or
implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of September, 1997. Specifications and information herein are subject to change without notice.
No. 1354-2/2