591D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Low Profile, Low ESR, Conformal Coated, Maximum CV FEATURES • New robust 6.3 V ratings for battery operated wireless applications Pb-free Available • New case size offerings RoHS* • 1.2 mm to 2 mm height COMPLIANT • Terminations: Lead (Pb)-free (2) standard • Very low ESR • 8 mm, 12 mm tape and reel packaging available per EIA-481-1 and reeling per IEC 286-3 7" [178 mm] standard 13" [330 mm] available PERFORMANCE CHARACTERISTICS • Footprint compatible with EIA 535BAAC and CECC 30801 molded chips Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Note: Refer to Doc. 40088 Capacitance Range: 1 µF to 1000 µF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 WVDC to 35 WVDC ORDERING INFORMATION 591D TYPE 106 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 010 CAPACITANCE DC VOLTAGE RATING TOLERANCE AT + 85 °C X0 = ± 20 % X9 = ± 10 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). B CASE CODE See Ratings and Case Codes Table 2 TERMINATION T REEL SIZE AND PACKAGING 15H SUFFIX 2 = 100 % Tin T = Tape and Reel 7" [178 mm] Reel 4 = Gold Plated 8 = Solder W = 13" [330 mm] Reel Plated 60/40 Special Order Maximum height (mm) see dimensions Note: Preferred Tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 40012 Revision: 23-Jan-08 For technical questions, contact: [email protected] www.vishay.com 97 591D Solid Tantalum Chip Capacitors TANTAMOUNT®, Low Profile, Low ESR, Conformal Coated, Maximum CV Vishay Sprague DIMENSIONS in inches [millimeters] Tantalum Wire Nib Identifies Anode (+) Terminal W L MAX. B D REF. J MAX. J MAX. A H CASE CODE SUFFIX A 15H B 15H B 20H C 15H C 20H D 15H D 20H R 15H R 20H H L (MAX.) W A B D (REF.) J (MAX.) 0.047 ± 0.012 [1.2 ± 0.3] 0.047 ± 0.012 [1.2 ± 0.3] 0.079 [2.0] Max. 0.047 ± 0.012 [1.2 ± 0.3] 0.079 [2.0] Max. 0.047 ± 0.012 [1.2 ± 0.3] 0.079 [2.0] Max. 0.047 ± 0.012 [1.2 ± 0.3] 0.079 [2.0] Max. 0.146 [3.7] 0.072 ± 0.012 [1.8 ± 0.3] 0.031 ± 0.012 [0.80 ± 0.30] 0.087 ± 0.016 [2.2 ± 0.4] 0.115 [2.9] 0.004 [0.1] 0.158 [4.0] 0.110 + 0.012 [2.8 ± 0.3] 0.031 ± 0.012 [0.80 ± 0.30] 0.097 ± 0.016 [2.5 ± 0.4] 0.139 [3.5] 0.004 [0.1] 0.281 [7.1] 0.126 ± 0.012 [3.2 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.30] 0.180 ± 0.024 [4.4 ± 0.6] 0.238 [6.0] 0.004 [0.1] 0.298 [7.5] 0.170 ± 0.012 [4.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.30] 0.180 ± 0.024 [4.6 ± 0.6] 0.254 [6.4] 0.004 [0.1] 0.285 [7.2] 0.235 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.051 ± 0.012 [1.3 ± 0.30] 0.180 ± 0.024 [4.6 ± 0.6] 0.246 [6.2] 0.004 [0.1] Note: The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] RATINGS AND CASE CODES µF 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 4V 6.3 V 10 V A/B A/B B/C C/D D/R C/R C/D C/D C/D/R D/R R A/B A/B B/C C/D D/R B/C/D/R C/D/R C/D/R C/D/R C/D/R R R A/B/C C/D D/R C/D/R B/C/D C/D D/R D/R 16 V A A B/C B/D C/D C/D/R C/R C/D D R R 20 V 25 V A/B B/C B/D C/R C*/D/R D*/R A/B B/C C C/D D/R C*/R D* D* 35 V A/B B/C B/C/D B/R D/R R R Note: * Preliminary values, contact factory for availability www.vishay.com 98 For technical questions, contact: [email protected] Document Number: 40012 Revision: 23-Jan-08 591D Solid Tantalum Chip Capacitors TANTAMOUNT®, Low Profile, Low ESR, Conformal Coated, Maximum CV Vishay Sprague STANDARD/EXTENDED RATINGS CAPACITANCE (µF) CASE CODE 22 22 47 47 68 68 100 100 150 150 220 220 330 330 470 470 470 680 680 1000 A B B C C D D R C R D C D C R C D D R R 15 15 22 22 33 33 47 47 68 68 100 100 100 100 100 100 150 150 150 150 220 220 220 220 330 330 A B A B B C C D D R B C C D R R D R R C R D C C R D PART NUMBER* MAX. DCL AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz (Ω) 4 WVDC AT + 85 °C, SURGE = 5.2 V . . . 2.7 WVDC AT + 125 °C, SURGE = 3.4 V 591D226X_004A2_15H 0.9 6 1.200 591D226X_004B2_15H 0.9 6 0.800 591D476X_004B2_15H 1.9 6 0.800 591D476X_004C2_15H 1.9 6 0.200 591D686X_004C2_15H 2.7 6 0.180 591D686X_004D2_15H 2.7 6 0.140 591D107X_004D2_15H 4.0 8 0.130 591D107X_004R2_15H 4.0 8 0.110 591D157X_004C2_15H 6.0 8 0.150 591D157X_004R2_15H 6.0 8 0.100 591D227X_004D2_15H 8.8 8 0.100 591D227X_004C2_20H 8.8 8 0.075 591D337X_004D2_20H 13.2 8 0.060 591D337X_004C2_20H 13.2 8 0.070 591D477X_004R2_20H 18.8 8 0.045 591D477X_004C2_20H 18.8 10 0.070 591D477X_004D2_20H 18.8 10 0.060 591D687X_004D2_20H 27.2 12 0.085 591D687X_004R2_20H 27.2 12 0.045 591D108X_004R2_20H 40.0 14 0.050 6.3 WVDC AT + 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V 591D156X_6R3A2_15H 0.9 6 1.300 591D156X_6R3B2_15H 0.9 6 0.800 591D226X_6R3A2_13H 1.4 6 0.800 591D226X_6R3B2_15H 1.4 6 0.800 591D336X_6R3B2_15H 2.1 6 0.800 591D336X_6R3C2_15H 2.1 6 0.200 591D476X_6R3C2_15H 3.0 6 0.200 591D476X_6R3D2_15H 3.0 6 0.140 591D686X_6R3D2_15H 4.0 6 0.130 591D686X_6R3R2_15H 4.0 6 0.110 591D107X_6R3B2_15H 6.0 8 0.500 591D107X_6R3C2_15H 6.0 6 0.190 591D107X_6W3C2_15H 6.0 6 0.190 591D107X_6R3D2_15H 6.0 6 0.150 591D107X_6R3R2_15H 6.0 8 0.100 591D107X_6W3R2_15H 6.0 8 0.100 591D157X_6R3D2_15H 9.5 6 0.120 591D157X_6R3R2_15H 9.5 8 0.140 591D157X_6W3R2_15H 9.5 8 0.140 591D157X_6R3C2_20H 9.5 8 0.080 591D227X_6R3R2_15H 13.9 8 0.150 591D227X_6R3D2_20H 13.9 8 0.065 591D227X_6R3C2_20H 13.9 8 0.075 591D227X_6W3C2_20H 13.9 8 0.075 591D337X_6R3R2_20H 20.8 8 0.045 591D337X_6R3D2_20H 20.8 8 0.060 MAX. RIPPLE 100 kHz Irms (A) 0.22 0.32 0.33 0.74 0.78 1.04 1.07 1.22 0.86 1.28 1.22 1.21 1.53 1.25 1.97 1.25 1.52 1.28 1.97 1.67 0.24 0.32 0.20 0.32 0.32 0.74 0.74 1.04 1.07 1.22 0.41 0.76 0.76 0.91 1.28 1.28 0.88 1.08 1.08 1.17 1.05 1.47 1.21 1.21 1.97 1.52 Note: * Preliminary values, contact factory for availability. For 10 % tolerance, specify “9”; for 20 % tolerance, change to ”0” Document Number: 40012 Revision: 23-Jan-08 For technical questions, contact: [email protected] www.vishay.com 99 591D Solid Tantalum Chip Capacitors TANTAMOUNT®, Low Profile, Low ESR, Conformal Coated, Maximum CV Vishay Sprague STANDARD/EXTENDED RATINGS CAPACITANCE (µF) CASE CODE 330 330 470 470 470 470 470 680 680 1000 1500 D C C C R R D R R R R 10 10 22 22 22 22 33 33 47 47 68 68 68 100 100 100 150 150 150 150 220 220 330 330 330 A B A A B C C D D R C D R B C D D D C C R D D R R 4.7 6.8 10 10 15 15 22 22 33 33 33 47 47 A A B C B D C D C D R R C PART NUMBER* MAX. DCL AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT+ 25 °C 100 kHz (Ω) 6.3 WVDC AT + 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V 591D337X_6W3D2_20H 20.8 8 0.060 591D337X_6R3C2_20H 20.8 8 0.070 591D477X_6R3C2_20H 29.6 10 0.060 591D477X06R3C2_16H 29.6 14 0.080 591D477X_6R3R2_20H 29.6 10 0.045 591D477X_6W3R2_20H 29.6 10 0.045 591D477X_6R3D2_20H 29.6 10 0.085 591D687X_6R3R2_20H 42.8 10 0.060 591D687X_6R3R2_16H 42.8 10 0.060 591D108X_6R3R2_20H 63 20 0.075 591D158X06R3R2_20H 95 33 0.06 10 WVDC AT + 85 °C, SURGE = 13 V . . . 7 WVDC AT + 125 °C, SURGE = 8 V 591D106X_010A2_15H 1.0 6 1.300 591D106X_010B2_15H 1.0 6 0.850 591D226X_010A2_13H 2.2 6 0.800 591D226X_010A2_15H 2.2 6 0.900 591D226X_010B2_15H 2.2 6 0.800 591D226X_010C2_15H 2.2 6 0.200 591D336X_010C2_15H 3.3 6 0.200 591D336X_010D2_15H 3.3 6 0.140 591D476X_010D2_15H 4.7 6 0.140 591D476X_010R2_15H 4.7 6 0.120 591D686X_010C2_15H 6.8 6 0.190 591D686X_010D2_15H 6.8 6 0.130 591D686X_010R2_15H 6.8 6 0.110 591D107X_010B2T20H 10.0 14 0.250 591D107X_010C2_20H 10.0 8 0.085 591D107X_010D2_15H 10.0 8 0.130 591D157X_010D2_20H 15.0 8 0.075 591D157X_010D2_15H 15.0 8 0.120 591D157X_010C2_15H 15.0 8 0.083 591D157X_010C2_20H 15.0 8 0.080 591D227X_010R2_20H 22.0 8 0.055 591D227X_010D2_20H 22.0 8 0.065 591D337X_010D2_20H 33.0 8 0.060 591D337X_010R2_20H 33.0 8 0.050 591D337X_010R2_18H 33.0 8 0.050 16 WVDC AT + 85 °C, SURGE = 20 V . . . 10 WVDC AT + 125 °C, SURGE = 12 V 591D475X_016A2_15H 0.8 6 1.750 591D685X_016A2_15H 1.1 6 1.750 591D106X_016B2_15H 1.6 6 0.800 591D106X_016C2_15H 1.6 6 0.500 591D156X_016B2_15H 2.4 6 0.700 591D156X_016D2_15H 2.4 6 0.250 591D226X_016C2_15H 3.5 6 0.240 591D226X_016D2_15H 3.5 6 0.180 591D336X_016C2_15H 5.3 6 0.180 591D336X_016D2_15H 5.3 6 0.170 591D336X_016R2_15H 5.3 6 0.140 591D476X_016R2_15H 7.5 6 0.130 591D476X_016C2_20H 7.5 6 0.180 MAX. RIPPLE 100 kHz Irms (A) 1.52 1.25 1.35 1.12 1.97 1.97 1.28 1.87 1.87 1.52 1.71 0.24 0.31 0.27 0.26 0.32 0.74 0.74 1.04 1.04 1.17 0.76 1.15 1.22 0.57 1.13 1.07 1.37 1.02 1.17 1.17 1.78 1.47 1.53 1.87 1.87 0.19 0.19 0.32 0.45 1.07 0.77 0.67 0.91 0.74 0.94 1.08 1.12 0.78 Note * Preliminary values, contact factory for availability. For 10 % tolerance, specify “9”; for 20 % tolerance, change to ”0” www.vishay.com 100 For technical questions, contact: [email protected] Document Number: 40012 Revision: 23-Jan-08 591D Solid Tantalum Chip Capacitors TANTAMOUNT®, Low Profile, Low ESR, Conformal Coated, Maximum CV Vishay Sprague STANDARD/EXTENDED RATINGS CAPACITANCE (µF) CASE CODE 68 68 100 150 220 D C D R R 4.7 4.7 6.8 6.8 10 10 15 15 22 22 22* 22* 33 33* A B B C B D C R D R D* C* R D* 2.2 2.2 3.3 3.3 4.7 6.8 6.8 10 10 15 15* 22* 33* 68 A B B C C C D D R R C* D* D* R 1.0 1.0 2.2 2.2 3.3 3.3 3.3 4.7 4.7 6.8 6.8 10 A B B C B C D B R D R R PART NUMBER* MAX. DCL AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz (Ω) 16 WVDC AT + 85 °C, SURGE = 20 V . . . 10 WVDC AT + 125 °C, SURGE = 12 V 591D686X_016D2_20H 10.9 6 0.080 591D686X_016C2_20H 10.9 6 0.100 591D107X_016D2_20H 16.0 8 0.075 591D157X_016R2_20H 24.0 8 0.060 591D227X_016R2_20H 35.2 10 0.075 20 WVDC AT + 85 °C, SURGE = 26 V . . . 13 WVDC AT + 125 °C, SURGE = 16 V 591D475X_020A2_15H 0.9 6 1.900 591D475X_020B2_15H 0.9 6 1.600 591D685X_020B2_15H 1.4 6 1.600 591D685X_020C2_15H 1.4 6 0.400 591D106X_020B2_15H 2.0 6 1.500 591D106X_020D2_15H 2.0 6 0.270 591D156X_020C2_15H 3.0 6 0.300 591D156X_020R2_15H 3.0 6 0.180 591D226X_020D2_15H 4.4 6 0.200 591D226X_020R2_15H 4.4 6 0.140 591D226X_020D2_20H* 4.4* 6* 0.150* 591D226X_020C2_20H* 4.4* 6* 0.375* 591D336X_020R2_15H 6.6 6 0.140 591D336X_020D2_20H* 6.6* 6* 0.200* 25 WVDC AT + 85 °C, SURGE = 33 V . . . 17 WVDC AT + 125 °C, SURGE = 20 V 591D225X_025A2_15H 0.6 6 5.000 591D225X_025B2_15H 0.6 6 3.800 591D335X_025B2_15H 0.8 6 3.700 591D335X_025C2_15H 0.8 6 1.000 591 D475X_025C2_15H 1.2 6 0.800 591D685X_025C2_15H 1.7 6 0.750 591D685X_025D2_15H 1.7 6 0.650 591D106X_025D2_15H 2.5 6 0.600 591D106X_025R2_15H 2.5 6 0.240 591D156X_025R2_15H 3.8 6 0.200 591D156X_025C2_20H* 3.8* 6* 0.250* 591D226X_025D2_20H* 5.5* 6* 0.200* 591D336X_025D2_20H* 6.0* 6* 0.200* 591D686X_025R2_20H 17 8 0.175 35 WVDC AT + 85 °C, SURGE = 46 V . . . 23 WVDC AT + 125 °C, SURGE = 28 V 591D105X_035A2_15H 0.5 4 5.000 591D105X_035B2_15H 0.5 4 4.400 591D225X_035B2_15H 0.8 6 4.000 591D225X_035C2_15H 0.8 6 2.000 591D335X_035B2_15H 1.2 6 3.500 591D335X_035C2_15H 1.2 6 1.900 591D335X_035D2_15H 1.2 6 1.500 591D475X_035B2_15H 1.6 6 0.800 591D475X_035R2_15H 1.6 6 0.750 591D685X_035D2_15H 2.4 6 0.950 591D685X_035R2_15H 2.4 6 0.750 591D106X_035R2_15H 3.5 6 0.600 MAX. RIPPLE 100 kHz Irms (A) 1.32 1.05 1.37 1.71 1.53 0.18 0.22 0.22 0.52 0.23 0.75 0.60 0.91 0.87 1.09 0.90* 0.54* 1.08 0.73* 0.11 0.15 0.15 0.32 0.37 0.38 0.48 0.50 0.83 0.91 0.66* 0.84* 0.84* 1.00 0.11 0.13 0.14 0.22 0.15 0.23 0.32 0.32 0.47 0.40 0.47 0.52 Note: * Preliminary values, contact factory for availability. For 10 % tolerance, specify “9”; for 20 % tolerance, change to ”0” Document Number: 40012 Revision: 23-Jan-08 For technical questions, contact: [email protected] www.vishay.com 101 591D Solid Tantalum Chip Capacitors TANTAMOUNT®, Low Profile, Low ESR, Conformal Coated, Maximum CV Vishay Sprague CASE CODE/PART NUMBER X-REF OLD NEW A2_ A2_15H B2_ B2_15H C2_ C2_15H D2_ D2_15H R2_ R2_15H U2_ C2_20H V2_ D2_20H W2_ R2_20H TYPICAL CURVES OF ESR - AS A FUNCTION OF FREQUENCY 591D 150 - 10 V E/20H CASE ESR/IMPEDANCE VS. FREQUENCY 591D 330 - 6.3 V D/20H CASE ESR/IMPEDANCE VS. FREQUENCY 10.00 10.00 IMPEDANCE IMPEDANCE ESR ESR 1.00 Ω Ω 1.00 0.10 0.10 0.01 0.01 0.001 100 0.001 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 100 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz FREQUENCY FREQUENCY 591D 470 - 6.3 V R/20H CASE ESR/IMPEDANCE VS. FREQUENCY 10.00 IMPEDANCE ESR Ω 1.00 0.10 0.01 100 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz FREQUENCY www.vishay.com 102 For technical questions, contact: [email protected] Document Number: 40012 Revision: 23-Jan-08 591D Solid Tantalum Chip Capacitors TANTAMOUNT®, Low Profile, Low ESR, Conformal Coated, Maximum CV Vishay Sprague TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY “B” CASE “A” CASE IMPEDANCE 1000 IMPEDANCE 1000 ESR ESR 100 Ω Ω 100 1 µF, 35 VDC 4.7 µF, 20 V 10 10 15 µF, 6.3 VDC 1 1 10 µF, 10 V 0.1 0.1 100 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 100 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz 10 MHz FREQUENCY “C” CASE “D” CASE 1000 100 IMPEDANCE IMPEDANCE 10 10 Ω Ω ESR ESR 100 6.8 µF, 25 V 1 4.7 µF, 25 V 1 0.1 47 µF, 6.3 V 33 µF, 6.3 V 0.01 0.1 100 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 100 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz FREQUENCY FREQUENCY “R” CASE 100 IMPEDANCE Ω 10 ESR 1 10 µF, 25 V 0.1 100 µF, 6.3 V 0.01 100 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz FREQUENCY Document Number: 40012 Revision: 23-Jan-08 For technical questions, contact: [email protected] www.vishay.com 103 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1