FAIRCHILD KA7912ATU

KA79XX / KA79XXA / LM79XX
3-Terminal 1 A Negative Voltage Regulator
Features
Description
• Output Current in Excess of 1 A
• Output Voltages of: -5 V, -6 V, -8 V, -9 V, -12 V, -15 V,
-18 V, -24 V
• Internal Thermal Overload Protection
• Short-Circuit Protection
• Output Transistor Safe Operating Area Compensation
The KA79XX / KA79XXA / LM79XX series of three-terminal negative regulators are available in a TO-220 package with several fixed output voltages, making them
useful in a wide range of applications. Each type employs
internal current limiting, thermal shutdown, and safe
operating area protection.
TO-220
Input
1
1. GND 2. Input 3. Output
Ordering Information
Product Number
Output Voltage
Tolerance
Package
Packing Method
Operating
Temperature
Rail
0 to +125°C
KA7905TU
KA7906TU
KA7908TU
KA7909TU
KA7912TU
±4%
TO-220
(Dual Gauge)
KA7915TU
KA7918TU
KA7924TU
KA7912ATU
KA7915ATU
±2%
LM7905CT
LM7908CT
LM7909CT
LM7910CT
±4%
TO-220
(Single Gauge)
LM7912CT
LM7915CT
LM7918CT
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
1
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
August 2013
GND
R1
VOLTAGE
REFERENCE
R2
Out
Output
+
Q1
Q2
I1
PROTECTION
CIRCUITRY
I2
Rsc
In
Input
Figure 1. Block Diagram
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Symbol
VI
Parameter
Value
Input Voltage
Unit
-35
V
RθJC
Thermal Resistance, Junction-Case(1)
5
°C/W
RθJA
Thermal Resistance, Junction-Air(1, 2)
65
°C/W
TOPR
Operating Temperature Range
0 to +125
°C
TSTG
Storage Temperature Range
- 65 to +150
°C
Notes:
1. Thermal resistance test board, size: 76.2 mm x 114.3 mm x 1.6 mm(1S0P), JEDEC standard:
JESD51-3, JESD51-7.
2. Assume no ambient airflow.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
2
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Block Diagram
(VI = -10 V, IO = 500 mA, 0°C ≤ TJ ≤ +125°C, CI = 2.2 μF, CO = 1 μF; unless otherwise specified.)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25°C
-4.80
-5.00
-5.20
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = -7 V to -20 V
-4.75
-5.00
-5.25
ΔVO
Line Regulation(3)
TJ = +25°C
VI = -7 V to -25 V
35
100
VI = -8 V to -12 V
8
50
ΔVO
Load Regulation(3)
TJ = +25°C, IO = 5 mA to 1.5 A
10
100
TJ =+25°C, IO = 250 mA to 750 mA
3
50
IQ
Quiescent Current
TJ =+25°C
3
6
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -8 V to -25 V
0.10
0.80
Temperature Coefficient
of VD
IO = 5 mA
-0.4
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
40
μV
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
60
dB
VO
ΔIQ
ΔVo/ΔT
54
V
mV
mV
mA
mA
VD
Dropout Voltage
TJ =+25°C, IO = 1 A
2
V
ISC
Short-Circuit Current
TJ =+25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ =+25°C
2.2
A
Note:
3. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
3
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (KA7905 / LM7905)
(VI = -11 V, IO = 500 mA, 0°C ≤ TJ ≤ +125°C, CI = 2.2 μF, CO = 1 μF; unless otherwise specified.)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ =+25°C
-5.75
-6.00
-6.25
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = -9 V to -21 V
-5.70
-6.00
-6.30
ΔVO
Line Regulation(4)
TJ = +25°C
VI = -8 V to -25 V
10
120
VI = -9 V to -13 V
5
60
ΔVO
Load Regulation(4)
TJ = +25°C, IO = 5 mA to 1.5 A
10
120
TJ = +25°C, IO = 250 mA to 750 mA
3
60
IQ
Quiescent Current
TJ = +25°C
3
6
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -8 V to -25 V
0.10
1.30
Temperature Coefficient
of VD
IO = 5 mA
-0.5
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA =+25°C
130
μV
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
60
dB
VO
ΔIQ
ΔVo/ΔT
54
V
mV
mV
mA
mA
VD
Dropout Voltage
TJ = +25°C, IO = 1 A
2
V
ISC
Short-Circuit Current
TJ = +25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ = +25°C
2.2
A
Note:
4. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
4
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (KA7906)
(VI = -14 V, IO = 500 mA, 0°C ≤ TJ ≤ +125°C, CI = 2.2 μF, CO =1 μF; unless otherwise specified.)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ =+25°C
-7.7
-8.0
-8.3
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = -10 V to -23 V
-7.6
-8.0
-8.4
ΔVO
Line Regulation(5)
TJ = +25°C
VI = -10.5 V to -25 V
10
160
VI = -11 V to -17 V
5
80
ΔVO
Load Regulation(5)
TJ = +25°C, IO = 5 mA to 1.5 A
12
160
TJ = +25°C, IO = 250 mA to 750 mA
4
80
IQ
Quiescent Current
TJ = +25°C
3
6
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -10.5 V to -25 V
0.10
1.00
Temperature Coefficient
of VD
IO = 5 mA
-0.6
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
175
μV
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
60
dB
VO
ΔIQ
ΔVo/ΔT
54
V
mV
mV
mA
mA
VD
Dropout Voltage
TJ =+25°C, IO = 1 A
2
V
ISC
Short-Circuit Current
TJ =+25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ = +25°C
2.2
A
Note:
5. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
5
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (KA7908 / LM7908)
(VI = -15 V, IO = 500 mA, 0°C ≤ TJ ≤ +125°C, CI = 2.2 μF, CO =1 μF; unless otherwise specified.)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25°C
-8.7
-9.0
-9.3
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = -1.5 V to -23 V
-8.6
-9.0
-9.4
ΔVO
Line Regulation(6)
TJ =+25°C
VI = -11.5 V to -26 V
10
180
VI = -12 V to -18 V
5
90
ΔVO
Load Regulation(6)
TJ =+25°C, IO = 5 mA to 1.5 A
12
180
TJ =+25°C, IO = 250 mA to 750 mA
4
90
IQ
Quiescent Current
TJ = +25°C
3
6
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -11.5 V to -26 V
0.10
1.00
Temperature Coefficient
of VD
IO = 5 mA
-0.6
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
175
μV
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
60
dB
VO
ΔIQ
ΔVo/ΔT
54
V
mV
mV
mA
mA
VD
Dropout Voltage
TJ = +25°C, IO = 1 A
2
V
ISC
Short-Circuit Current
TJ = +25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ = +25°C
2.2
A
Note:
6. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
6
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (KA7909 / LM7909)
(VI = -17 V, IO = 500 mA, 0°C ≤ TJ ≤ +125°C, CI = 2.2 μF, CO =1 μF; unless otherwise specified.)
Symbol
VO
ΔVO
ΔVO
Parameter
Conditions
Min.
Typ.
Max.
TJ = +25°C
-9.6
-10.0
-10.4
Output Voltage
IO = 5 mA to 1A, Pd ≤ 15 W,
VI = -12 V to -28 V
-9.5
-10.0
-10.5
Line Regulation(7)
TJ = +25°C
VI = -12.5 V to -28 V
12
200
VI = -14 V to -20 V
6
100
TJ = +25°C,
IO = 5 mA to 1.5 A
12
200
TJ = +25°C,
IO = 250 mA to 750 mA
4
100
3
6
Load Regulation(7)
Quiescent Current
TJ = +25°C
ΔIQ
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -12.5 V to -28 V
0.10
1.00
Temperature Coefficient
of VO
IO = 5 mA
V
mV
mV
IQ
ΔVo/ΔT
Unit
mA
mA
-1
mV/°C
280
μV
60
dB
2
V
VN
Output Noise Voltage
10 Hz ≤ f ≤ 100 kHz, TA =+25°C
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
VD
Dropout Voltage
TJ = +25°C, IO = 1 A
ISC
Short-Circuit Current
TJ = +25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ = +25°C
2.2
A
54
Note:
7. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
7
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (LM7910)
(VI = -19 V, IO = 500 mA, 0°C ≤ TJ ≤ +125°C, CI = 2.2 μF, CO = 1 μF; unless otherwise specified.)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25°C
-11.5
-12.0
-12.5
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W
VI = -15.5 V to -27 V
-11.4
-12.0
-12.6
ΔVO
Line Regulation(8)
TJ = +25°C
VI = -14.5 V to -30 V
12
240
VI = -16 V to -22 V
6
120
ΔVO
Load Regulation(8)
TJ = +25°C, IO = 5 mA to 1.5 A
12
240
TJ =+25°C, IO = 250 mA to 750 mA
4
120
IQ
Quiescent Current
TJ =+25°C
3
6
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -14.5 V to -30 V
0.10
1.00
Temperature Coefficient
of VD
IO = 5 mA
-0.8
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA =+25°C
200
μV
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
60
dB
VO
ΔIQ
ΔVo/ΔT
54
V
mV
mV
mA
mA
VD
Dropout Voltage
TJ = +25°C, IO = 1 A
2
V
ISC
Short-Circuit Current
TJ = +25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ = +25°C
2.2
A
Note:
8. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
8
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (KA7912 / LM7912)
(VI = -23 V, IO = 500 mA, 0°C ≤TJ ≤ +125°C, CI = 2.2 μF, CO = 1 μF; unless otherwise specified.)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25°C
-14.40
-15.00
-15.60
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W
VI = -18 V to -30 V
-14.25
-15.00
-15.75
ΔVO
Line Regulation(9)
TJ = +25°C
VI = -17.5 V to -30 V
12
300
VI = -20 V to -26 V
6
150
ΔVO
Load Regulation(9)
TJ = +25°C, IO = 5 mA to 1.5 A
12
300
TJ =+25°C, IO = 250 mA to 750 mA
4
150
IQ
Quiescent Current
TJ =+25°C
3
6
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -17.5 V to -30 V
0.10
1.00
Temperature Coefficient
of VD
IO = 5 mA
-0.9
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
250
μV
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
60
dB
VO
ΔIQ
ΔVo/ΔT
54
V
mV
mV
mA
mA
VD
Dropout Voltage
TJ = +25°C, IO = 1 A
2
V
ISC
Short-Circuit Current
TJ = +25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ = +25°C
2.2
A
Note:
9. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
9
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (KA7915 / LM7915)
(VI = -27 V, IO = 500 mA, 0°C ≤ TJ ≤ +125°C, CI = 2.2 μF, CO =1 μF, unless otherwise specified.)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
TJ = +25°C
-17.3
-18.0
-18.7
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W
VI = -22.5 V to -33 V
-17.1
-18.0
-18.9
ΔVO
Line Regulation(10)
TJ = +25°C
VI = -21 V to -33 V
15
360
VI = -24 V to -30 V
8
180
ΔVO
Load Regulation(10)
TJ = +25°C, IO = 5 mA to 1.5 A
15
360
TJ = +25°C, IO = 250 mA to 750 mA
5
180
IQ
Quiescent Current
TJ = +25°C
3
6
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -21 V to -33 V
0.10
1.00
VO
ΔIQ
Temperature Coefficient
of VD
IO = 5 mA
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA = +25°C
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
ΔVo/ΔT
54
Unit
V
mV
mV
mA
mA
-1
mV/°C
300
μV
60
dB
VD
Dropout Voltage
TJ = +25°C, IO = 1 A
2
V
ISC
Short-Circuit Current
TJ = +25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ =+25°C
2.2
A
Note:
10. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
10
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (KA7918 / LM7918)
(VI = -33 V, IO = 500 mA, 0°C ≤ TJ ≤ +125°C, CI = 2.2 μF, CO = 1 μF; unless otherwise specified.)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
TJ = +25°C
-23.0
-24.0
-25.0
Output Voltage
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = -27 V to -38 V
-22.8
-24.0
-25.2
ΔVO
Line Regulation(11)
TJ =+25°C
VI = -27 V to -38 V
15
480
VI = -30 V to -36 V
8
180
ΔVO
Load Regulation(11)
TJ = +25°C, IO = 5 mA to 1.5 A
15
480
TJ = +25°C, IO = 250 mA to 750 mA
5
240
IQ
Quiescent Current
TJ = +25°C
3
6
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -27 V to -38 V
0.10
1.00
VO
ΔIQ
Temperature Coefficient
of VD
IO = 5 mA
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA =+25°C
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
ΔVo/ΔT
54
Unit
V
mV
mV
mA
mA
-1
mV/°C
400
μV
60
dB
VD
Dropout Voltage
TJ =+25°C, IO = 1 A
2
V
ISC
Short-Circuit Current
TJ =+25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ =+25°C
2.2
A
Note:
11. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
11
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (KA7924)
(VI = -19 V, IO = 500 mA, 0°C ≤ TJ ≤ +125°C, CI = 2.2 μF, CO =1 μF; unless otherwise specified.)
Symbol
VO
Parameter
Output Voltage
Conditions
Min.
Typ.
Max.
TJ =+25°C
-11.75
-12.00
-12.25
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = -15.5 V to -27 V
-11.50
-12.00
-12.50
VI = -14.5 V to -27 V,
Io = 1 A
12
120
VI= -16 V to -22 V,
Io = 1 A
6
60
12
120
TJ = +25°C
ΔVO
Line Regulation(12)
VI = -14.8 V to -30 V
VI = -16 V to -22 V, Io = 1 A
12
120
TJ =+25°C, IO = 5 mA to 1.5 A
12
150
TJ =+25°C, IO = 250 mA to 750 mA
4
75
Unit
V
mV
ΔVO
Load Regulation(12)
IQ
Quiescent Current
TJ =+25°C
3
6
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -15 V to -30 V
0.10
1.00
Temperature Coefficient
of VD
IO = 5 mA
-0.8
mV/°C
Output Noise Voltage
f = 10 Hz to 100 kHz, TA =+25°C
200
μV
60
dB
2
V
ΔIQ
ΔVo/ΔT
VN
mV
mA
mA
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
VD
Dropout Voltage
TJ =+25°C, IO = 1 A
ISC
Short-Circuit Current
TJ =+25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ =+25°C
2.2
A
54
Note:
12. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
12
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (KA7912A)
(VI = -23 V, IO = 500 mA, 0°C ≤ TJ ≤ +125°C, CI = 2.2 μF, CO = 1 μF; unless otherwise specified.)
Symbol
VO
Parameter
Output Voltage
Conditions
Min.
Typ.
Max.
TJ = +25°C
-14.7
-15.0
-15.3
IO = 5 mA to 1 A, PO ≤ 15 W,
VI = -18 V to -30 V
-14.4
-15.0
-15.6
VI = -17.5 V to -30 V,
Io = 1 A
12
150
VI = -20 V to -26 V,
Io = 1 A
6
75
12
150
TJ =+25°C
ΔVO
Line Regulation(13)
VI = -17.9 V to -30 V
VI = -20 V to -26 V, Io = 1 A
6
150
TJ = +25°C, IO = 5 mA to 1.5 A
12
150
TJ = +25°C, IO = 250 mA to 750 mA
4
75
Unit
V
mV
ΔVO
Load Regulation(13)
IQ
Quiescent Current
TJ =+25°C
3
6
Quiescent Current
Change
IO = 5 mA to 1 A
0.05
0.50
VI = -18.5 V to -30 V
0.10
1.00
Temperature Coefficient
of VD
IO = 5 mA
-0.9
mV/°C
VN
Output Noise Voltage
f = 10 Hz to 100 kHz, TA =+25°C
250
μV
RR
Ripple Rejection
f = 120 Hz, ΔVI = 10 V
60
dB
VD
Dropout Voltage
TJ = +25°C, IO = 1 A
2
V
ISC
Short-Circuit Current
TJ =+25°C, VI = -35 V
300
mA
IPK
Peak Current
TJ =+25°C
2.2
A
ΔIQ
ΔVo/ΔT
54
mV
mA
mA
Note:
13. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
13
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Electrical Characteristics (KA7915A)
15
Vin=10V
Io=40mA
Ou 5.05
tp
5
ut
Vo
lta 4.95
ge
[- 4.9
V]
Load Regulation[mV]
Output Voltage[-V]
5.1
Vin=25V
Io=100mA
4.85
4.8
-40
-25
0
25
50
75
TA, Ambient Temperature
100
-3
-5
-40
[ oC]
-25
0
25
50
75
100
125
TA, Ambient Temperature [ oC]
Figure 2. Output Voltage
Figure 3. Load Regulation
4
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
V l
[V]
Dropout Voltage [V]
3.5
D
Quiescent Current [mA]
Io=0.75A
-1
25
125
Io=1.5A
Lo 13
ad 11
Re 9
gul 7
ati 5
on 3
[m
1
V]
3
2.5
2
1.5
Io=1A
1
0.5
0
-40
-25
0
25
50
75
100
TA, Ambient Temperature [oC]
125
5
Figure 4. Quiescent Current
-40
-25
0
25
50
75
100
125
TA, Ambient Temperature [oC]
Figure 5. Dropout Voltage
Short Circuit Current[A]
0.6
0.55
Sh 0.5
ort 0.45
Cir 0.4
cui 0.35
0.3
t
0.25
Cu 0.2
rre 0.15
nt 0.1
[A] 0.05
0
-0.05
-0.1
-40
-25
0
25
50
75
100
TA, Ambient Temperature [ oC]
125
Figure 6. Short-Circuit Current
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
14
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Typical Performance Characteristics
+
2.2 μF
+
1 μF
Co
CI
1
2
Input
3
KA79XX
LM79XX
Output
Figure 7. Negative Fixed Output Regulator
1
+15 V
KA7812
LM7812
+
C1
3
Co +
2
0.33 μF
+12 V
1 μF
1N4001
*
GND
+ 2.2 μF
C1
1
2
-15 V
1 μF +
Co
KA7912
LM7912
3
1N4001
*
-12 V
Figure 8. Split Power Supply (±12 V / 1 A)
Notes:
14. To specify an output voltage, substitute voltage value for "XX".
15. CI is required if the regulator is located an appreciable distance from the power supply filter. For value given,
capacitor must be solid tantalum. If aluminium electronics are used, at least ten times the value shown should be
selected.
16. CO improves stability and transient response. If large capacitors are used, a high-current diode from input to
output (1N4001 or similar) should be introduced to protect the device from momentary input short circuit.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
15
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Typical Applications
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Physical Dimensions
TO-220 (SINGLE GAUGE)
Figure 9. TO-220, MOLDED, 3-LEAD, JEDEC VARIATION AB (ACTIVE)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/TO/TO220B03.pdf.
For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area:
http://www.fairchildsemi.com/packing_dwg/PKG-TO220B03_TC.pdf.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
16
KA79XX / KA79XXA / LM79XX — 3-Terminal 1 A Negative Voltage Regulator
Physical Dimensions (Continued)
TO-220 (DUAL GAUGE)
Figure 10. TO-220, MOLDED, 3LD, JEDEC VARIATION AB (ACTIVE)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/TO/TO220Y03.pdf.
For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area:
http://www.fairchildsemi.com/packing_dwg/PKG-TO220Y03.pdf.
© 2002 Fairchild Semiconductor Corporation
KA79XX / KA79XXA / LM79XX Rev. 1.1.0
www.fairchildsemi.com
17
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
2Cool¥
AccuPower¥
AX-CAP®*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax¥
ESBC¥
FPS¥
F-PFS¥
FRFET®
SM
Global Power Resource
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
mWSaver®
OptoHiT¥
OPTOLOGIC®
OPTOPLANAR®
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series¥
®
FACT
FAST®
FastvCore¥
FETBench¥
Sync-Lock™
®
PowerTrench®
PowerXS™
Programmable Active Droop¥
QFET®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM®
STEALTH¥
SuperFET®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS®
SyncFET¥
®*
TinyBoost®
®
TinyBuck
TinyCalc¥
TinyLogic®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT®*
PSerDes¥
®
UHC
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
2. A critical component in any component of a life support, device, or
intended for surgical implant into the body or (b) support or sustain
system whose failure to perform can be reasonably expected to
life, and (c) whose failure to perform when properly used in
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the user.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I65
© Fairchild Semiconductor Corporation
www.fairchildsemi.com