L6924D Li-Ion/Li-Polymer Battery Charger System with Integrated Power Switch DATA BRIEF Features ■ Fully integrated solution with Power pass MOSFET, reverse blocking diode, sense resistor and thermal protection ■ Ideal for Coke and Graphite anode Single cell Li-Ion packs ■ Both Linear and Quasi Pulse operation ■ Programmable charge current ■ Programmable Pre-Charge voltage threshold ■ ±1% output voltage accuracy ■ Status outputs to drive LEDs or Host Processor interface ■ Programmable charge timer and charge end current ■ Small VFQFPN package (3mm x 3mm) ■ Low thermal resistance: 80°C/W ■ Charge current thermal loop VFQFPN 16 PDA's ■ Handheld Devices ■ Cellular Phones ■ Digital Cameras ■ Stand-alone Chargers ■ Usb Powered Chargers ■ Mp3 Players The L6924D is a fully monolithic linear battery charger, ideal for coke and graphite anode single cell Li-Ion packs that allows a charge management system in a very compact application. It is the ideal way for space limited applications, like PDA's, hand held, cellular phones and digital cameras. It is realized in BCD6 technology and, in a small VFQFPN 3x3 16 pins package, that integrates all the power elements (the Power pass MOSFET, the reverse blocking diode and the sense resistor). Applications ■ Description The maximum application flexibility of the L6924D, is given by the possibility of programming all the features (like pre-charging current, charging current, the pre-charging voltage threshold, the end of charge current threshold and the charging time). When a real basic external wall adapter is used, the L6924D works in Linear Mode and charges the battery in a CC/CV (Constant current/ Constant voltage) profile. Order codes July 2005 Part number Package Packing L6924D VFQFPN 16 Tube CD00061067 For further information contact your local STMicroelectronics sales office. Rev 1 1/5 www.st.com 5 L6924D However, when a current-limited adapter is used, the device works in Quasi Pulse Mode thanks to its low input voltage. The device has an operating input voltage ranging from 2.5V to 14V. On the L6924D is possible to select the output voltage (4.1V-4.2V) with ±1% voltage accuracy. This allows to use both coke and graphite anode cells. The L6924D offers two open collector outputs, for diagnostic purpose, which can be used to drive two external LEDs, or to communicate with a host microcontroller. Moreover, the voltage across the resistor connected between IEND and GND gives the status about the charging current (working as a gas gauge) and some eventual faults, like battery over temperature, the battery absence and the over time charge. Figure 1. Basic Application Diagram NTC R3 VIN CHARGER VREF TH VOSNS IEND VINSNS C1 TPRG C3 IPRG L6924D VPRE ST1 ST2 ON OFF Figure 2. 2/5 SHDN GND BATTERY Li-Ion cell VOUT IPRE VOPRG Demo Board Layout CD00061067 C2 L6924D 1 Figure 3. 1 Package information Package information VFQFPN 16 (3mmx3mm) Mechanical Data & Package Dimensions mm inch OUTLINE AND MECHANICAL DATA DIM. MIN. TYP. MAX. MIN. TYP. MAX. 0.800 0.900 1.000 0.031 0.035 0.039 A1 0.020 0.050 0.0008 0.0019 A2 0.650 1.000 0.025 A3 0.250 A 0.039 0.01 b 0.180 0.230 0.300 0.007 0.009 0.012 D 2.875 3.000 3.125 0.113 0.118 0.123 D2 0.250 0.700 1.250 0.010 0.027 0.050 E 2.875 3.000 3.125 0.113 0.118 0.123 E2 0.250 0.700 1.250 0.010 0.027 0.050 e 0.450 0.500 0.550 0.018 0.020 0.022 L 0.300 0.400 0.500 0.012 0.016 0.020 ddd 0.080 0.003 VFQFPN-16 (3x3x1.0mm) Very Fine Quad Flat Package No lead 7185330 D CD00061067 3/5 L6924D 2 Revision history 2 4/5 Revision history Date Revision 12-July-2005 1 Changes Initial release. CD00061067 L6924D Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com CD00061067 5/5