VS-30.PF1.PbF Series, VS-30.PF1.-M3 Series www.vishay.com Vishay Semiconductors Fast Soft Recovery Rectifier Diode, 30 A FEATURES • 150 °C max. operating junction temperature • Low forward voltage drop and short reverse recovery time TO-247AC modified • Designed and JEDEC-JESD47 TO-247AC Base common cathode 2, 4 Base common cathode 2 qualified according to • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition (-M3 only) APPLICATIONS 1 Cathode 3 Anode Anode 1 VS-30EPF1... Anode 3 VS-30APF1... These devices are intended for use in output rectification and freewheeling in inverters, choppers and converters as well as in input rectification where severe restrictions on conducted EMI should be met. DESCRIPTION PRODUCT SUMMARY Package TO-247AC, TO-247AC modified (2 pins) IF(AV) 30 A VR 1000 V, 1200 V VF at IF 1.41 V IFSM 350 A trr 95 ns TJ max. 150 °C Diode variation Single die Snap factor 0.6 The VS-30EPF1... and VS-30APF1... soft recovery rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS Sinusoidal waveform VRRM IFSM VF 30 A, TJ = 25 °C trr 1 A, 100 A/μs VALUES UNITS 30 A 1000 to 1200 V 350 A 1.41 V 95 ns - 40 to 150 °C VRRM, MAXIMUM PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM AT 150 °C mA VS-30EPF10PbF, VS-30APF10PbF VS-30EPF10-M3, VS-30APF10-M3 1000 1100 VS-30EPF12PbF, VS-30APF12PbF VS-30EPF12-M3, VS-30APF12-M3 1200 1300 TJ VOLTAGE RATINGS PART NUMBER Revision: 20-Oct-11 6 Document Number: 93705 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30.PF1.PbF Series, VS-30.PF1.-M3 Series www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES Maximum average forward current IF(AV) TC = 95 °C, 180° conduction half sine wave 30 Maximum peak one cycle non-repetitive surge current IFSM 10 ms sine pulse, rated VRRM applied 300 Maximum I2t for fusing I2t Maximum I2t for fusing I2t UNITS A 10 ms sine pulse, no voltage reapplied 350 10 ms sine pulse, rated VRRM applied 450 10 ms sine pulse, no voltage reapplied 636 t = 0.1 ms to 10 ms, no voltage reapplied 6360 A2s VALUES UNITS A2s ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL Maximum forward voltage drop VFM Forward slope resistance rt Threshold voltage VF(TO) Maximum reverse leakage current IRM TEST CONDITIONS 30 A, TJ = 25 °C TJ = 150 °C TJ = 25 °C V m 0.992 V 0.1 VR = Rated VRRM TJ = 150 °C 1.41 10.09 mA 6 RECOVERY CHARACTERISTICS PARAMETER SYMBOL Reverse recovery time trr Reverse recovery current Irr Reverse recovery charge Qrr Snap factor S TEST CONDITIONS IF at 30 Apk 25 A/μs 25 °C Typical VALUES UNITS 450 ns 6.1 A 2.16 μC IFM trr ta tb t dir dt 0.6 Qrr IRM(REC) THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Typical thermal resistance, case to heatsink RthCS DC operation Mounting surface, smooth and greased - 40 to 150 °C 0.8 °C/W 0.2 6 g 0.21 oz. minimum 6 (5) maximum 12 (10) kgf · cm (lbf · in) Case style TO-247AC modified Marking device Case style TO-247AC Revision: 20-Oct-11 UNITS 40 Approximate weight Mounting torque VALUES 30EPF10 30EPF12 30APF10 30APF12 Document Number: 93705 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30.PF1.PbF Series, VS-30.PF1.-M3 Series www.vishay.com Vishay Semiconductors 80 30.PF.. Series RthJC (DC) = 0.8 K/W 140 Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) 150 130 Ø Conduction angle 120 110 100 60° 90 120° 30° 90° 180° 0 5 10 20 15 30 25 DC 50 40 RMS limit 30 Ø 20 Conduction period 10 30.PF.. Series TJ = 150 °C 35 0 10 30 20 50 40 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Fig. 4 - Forward Power Loss Characteristics 150 350 30.PF.. Series RthJC (DC) = 0.8 K/W 140 130 Ø Conduction period 120 110 30° 100 60° 90° 90 At any rated load condition and with rated VRRM applied following surge. 300 Peak Half Sine Wave Forward Current (A) Maximum Allowable Case Temperature (°C) 60 0 80 Initial TJ = 150 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 250 200 150 100 120° 30.PF.. Series DC 180° 50 80 10 0 20 40 30 50 1 10 100 Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current Average Forward Current (A) Fig. 2 - Current Rating Characteristics 60 400 180° 120° 90° 60° 30° 50 40 350 Peak Half Sine Wave Forward Current (A) Maximum Average Forward Power Loss (W) 180° 120° 90° 60° 30° 70 RMS limit 30 20 Ø Conduction angle 10 10 15 20 25 30 250 200 150 30.PF.. Series 0 5 Initial TJ = 150 °C No voltage reapplied Rated VRRM reapplied 300 100 30.PF.. Series TJ = 150 °C 0 Maximum non-repetitive surge current versus pulse train duration. 35 50 0.01 0.1 1 Average Forward Current (A) Pulse Train Duration (s) Fig. 3 - Forward Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current Revision: 20-Oct-11 Document Number: 93705 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30.PF1.PbF Series, VS-30.PF1.-M3 Series Instantaneous Forward Current (A) www.vishay.com Vishay Semiconductors 1000 100 TJ = 25 °C TJ = 150 °C 10 30.PF.. Series 1 0 1 2 3 4 5 6 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics 30.PF.. Series TJ = 25 °C trr - Maximum Reverse Recovery Time (µs) 0.6 6 IFM = 30 A IFM = 20 A IFM = 10 A Qrr - Maximum Reverse Recovery Charge (µC) 0.7 IFM = 5 A IFM = 1 A 0.5 0.4 0.3 0.2 0.1 0 IFM = 20 A 4 3 IFM = 10 A 2 IFM = 5 A 1 IFM = 1 A 0 0 50 100 150 200 0 50 100 150 200 dI/dt - Rate of Fall of Forward Current (A/µs) dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 8 - Recovery Time Characteristics, TJ = 25 °C Fig. 10 - Recovery Charge Characteristics, TJ = 25 °C 10 1.2 30.PF.. Series TJ = 150 °C 30.PF.. Series TJ = 150 °C 1.0 Qrr - Maximum Reverse Recovery Charge (µC) trr - Maximum Reverse Recovery Time (µs) IFM = 30 A 30.PF.. Series TJ = 25 °C 5 IFM = 30 A IFM = 20 A IFM = 10 A IFM = 5 A IFM = 1 A 0.8 0.6 0.4 0.2 IFM = 30 A 8 IFM = 20 A 6 4 IFM = 10 A 2 IFM = 5 A IFM = 1 A 0 0 0 50 100 150 200 0 50 100 150 200 dI/dt - Rate of Fall of Forward Current (A/µs) dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 9 - Recovery Time Characteristics, TJ = 150 °C Fig. 11 - Recovery Charge Characteristics, TJ = 150 °C Revision: 20-Oct-11 Document Number: 93705 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30.PF1.PbF Series, VS-30.PF1.-M3 Series www.vishay.com Vishay Semiconductors 35 30.PF.. Series TJ = 25 °C 20 30.PF.. Series TJ = 150 °C IFM = 30 A 30 IFM = 20 A Irr - Maximum Reverse Recovery Current (A) Irr - Maximum Reverse Recovery Current (A) 25 IFM = 10 A 15 IFM = 5 A 10 IFM = 1 A 5 IFM = 30 A 25 IFM = 20 A 20 IFM = 10 A 15 IFM = 5 A 10 IFM = 1 A 5 0 0 0 50 100 150 0 200 50 100 150 200 dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 12 - Recovery Current Characteristics, TJ = 25 °C Fig. 13 - Recovery Current Characteristics, TJ = 150 °C ZthJC - Transient Thermal Impedance (K/W) dI/dt - Rate of Fall of Forward Current (A/µs) 1 Steady state value (DC operation) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single pulse 0.01 0.0001 0.001 30.PF.. Series 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics Revision: 20-Oct-11 Document Number: 93705 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30.PF1.PbF Series, VS-30.PF1.-M3 Series www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 30 E P F 12 PbF 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating (30 = 30 A) 3 - Circuit configuration: E = Single diode A = Single diode, 3 pins 4 - Package: P = TO-247AC/TO-247AC modified 5 - Type of silicon: F = Fast recovery 6 - Voltage code x 100 = VRRM 7 - Environmental digit: 10 = 1000 V 12 = 1200 V PbF = Lead (Pb)-free and RoHS compliant -M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-30EPF10PbF 25 500 Antistatic plastic tubes VS-30EPF10-M3 25 500 Antistatic plastic tubes VS-30APF10PbF 25 500 Antistatic plastic tubes VS-30APF10-M3 25 500 Antistatic plastic tubes VS-30EPF12PbF 25 500 Antistatic plastic tubes VS-30EPF12-M3 25 500 Antistatic plastic tubes VS-30APF12PbF 25 500 Antistatic plastic tubes VS-30APF12-M3 25 500 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions Part marking information SPICE model Revision: 20-Oct-11 TO-247AC modified www.vishay.com/doc?95253 TO-247AC www.vishay.com/doc?95223 TO-247AC modified PbF www.vishay.com/doc?95255 TO-247AC modified -M3 www.vishay.com/doc?95442 TO-247AC PbF www.vishay.com/doc?95226 TO-247AC -M3 www.vishay.com/doc?95007 www.vishay.com/doc?95184 Document Number: 93705 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000