WSK www.vishay.com Vishay Dale Power Metal Strip® Resistors, Low Value (down to 0.0005 ), Surface Mount, 4-Terminal FEATURES • 4-Terminal design allows for 1 % tolerance Available down to 0.0005 and 0.5 % tolerance down to 0.001 • Ideal for all types of precision current sensing, voltage division and pulse applications Available including switching and linear power supplies, instruments, power amplifiers • Proprietary processing technique produces extremely low resistance values (down to 0.0005 ) Available • All welded construction • Solderable terminations • Solid metal nickel-chrome or manganese-copper Available alloy resistive element with low TCR (< 20 ppm/°C) • Very low inductance 0.5 nH to 5 nH • Excellent frequency response to 50 MHz • AEC-Q200 qualified available (1) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note (1) Flame retardance test may not be applicable to some resistor technologies. Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE VALUE RANGE GLOBAL MODEL SIZE POWER RATING P70 °C W Tol. ± 0.1 % Tol. ± 0.5 % Tol. ± 1.0 % WEIGHT (typical) g/1000 pieces WSK2512 2512 1.0 0.01 to 0.2 0.001 to 0.2 0.0005 to 0.2 63.6 Note • Part marking: Value, tolerance; due to resistor size limitations some resistance values will be marked with only the resistance value. TECHNICAL SPECIFICATIONS PARAMETER UNIT Temperature coefficient RESISTOR CHARACTERISTICS ± 350 for 0.5 m to 0.99 m, ± 250 for 0.001 to 0.0029 , ± 75 for 0.003 to 0.0049 , ± 35 for 0.005 to 0.2 - 65 to + 170 (P x R)1/2 ppm/°C Operating temperature range Maximum working voltage °C V GLOBAL PART NUMBER INFORMATION Global Part Numbering example: WSK25125L000FTA (preferred part numbering format) W S K 2 5 1 2 5 L 0 0 0 F T A GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING CODE SPECIAL WSK2512 L = m* R = Decimal 5L000 = 0.005 R0100 = 0.01 B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % EA = Lead (Pb)-free, tape/reel EK = Lead (Pb)-free, bulk (Dash number) (up to 2 digits) From 1 to 99 as applicable TA = Tin/lead, tape/reel (R86) BA = Tin/lead, bulk (B43) * Use “L” for resistance values < 0.01 Historical Part Numbering example: WSK2512 0.005 1 % R86 (will continue to be accepted) WSK2512 0.005 1% R86 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING CODE Revision: 03-May-13 Document Number: 30108 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 WSK www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) L W H B b T A l d c a e DIMENSIONS MODEL RESISTANCE RANGE L W H T 0.025 ± 0.010 (0.635 ± 0.254) 0.105 ± 0.010 [2.66 ± 0.254] 0.087 ± 0.010 (2.21 ± 0.254) 0.047 ± 0.010 (1.19 ± 0.254) 0.0005 to 0.00099 WSK2512 0.001 to 0.0049 0.250 ± 0.010 (6.35 ± 0.254) 0.125 ± 0.010 (3.18 ± 0.254) 0.005 to 0.2 A B 0.030 ± 0.010 0.020 ± 0.010 (0.762 ± 0.254) (0.508 ± 0.254) SOLDER PAD DIMENSIONS MODEL a b c d e l 0.130 (3.30) 0.090 (2.29) 0.130 (3.30) 0.030 (0.76) 0.020 (0.51) 0.055 (1.40) 0.065 (1.65) 0.145 (3.68) Rated Power in % WSK2512 RESISTANCE RANGE 0.0005 to 0.0049 0.005 to 0.2 120 100 80 60 40 20 0 - 65 - 55 - 25 0 25 Derating 50 75 100 125 150 170 70 Ambient Temperature °C PERFORMANCE TEST Thermal shock Short time overload Low temperature operation High temperature exposure Bias humidity Mechanical shock Vibration Load life Resistance to solder heat Moisture resistance CONDITIONS OF TEST - 55 °C to + 150 °C, 1000 cycles, 15 min at each extreme 5 x rated power for 5 s - 65 °C for 24 h 1000 h at + 170 °C + 85 °C, 85 % RH, 10 % bias, 1000 h 100 g’s for 6 ms, 5 pulses Frequency varied 10 Hz to 2000 Hz in 1 min, 3 directions, 12 h 1000 h at rated power, + 70 °C, 1.5 h “ON”, 0.5 h “OFF” + 260 °C solder, 10 s to 12 s dwell, 25 mm/s emergence MIL-STD-202, method 106, 0 % power, 7a and 7b not required TEST LIMITS ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R ± (1.0 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R ± (1.0 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R PACKAGING MODEL WSK2512 TAPE WIDTH 12 mm/embossed plastic REEL DIAMETER 178 mm/7" PIECES/REEL 2000 CODE EA Note • Embossed Carrier Tape per EIA-481. Revision: 03-May-13 Document Number: 30108 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000