TEA2014A VIDEO SWITCH . .. . . 1 VIDEO OUTPUT 75Ω- 1VPP NOT SWITCHED 1 SWITCHED VIDEO OUTPUT 2VPP VIDEO CROSSTALK : 50dB TYPICAL SHORT CIRCUIT PROTECTION OF INPUTS AND OUTPUTS CLAMPED VIDEO INPUTS DIP8 (Plastic package) ORDER CODE : TEA2014A DESCRIPTION This integrated circuit provides all video switching allowing connections between the peri TV plug and video sections in the TV set. The TEA2014A is supplied in a DIP8. PIN CONNECTIONS 1 8 EXTERNAL VIDEO INPUT 75Ω VIDEO OUTPUT 2 7 SUPPLY VOLTAGE INTERNAL VIDEO INPUT 3 6 SWITCHED VIDEO OUTPUT NOT TO BE USED 4 5 SWITCHING INPUT 2014A-01.EPS GROUND May 1996 1/4 TEA2014A ABSOLUTE MAXIMUM RATINGS Value 18 Unit V °C 0, + 100 0, + 70 – 40, + 150 – 40, + 150 600 75 °C °C Ω Ω THERMAL DATA Symbol Rth (j-a) Parameter Junction-ambient Thermal Resistance Typ. Value 90 Unit °C/W 2014A-01.TBL Tj Tstg – Parameter Supply Voltage Operating Temperature with Load > 150 Ω on PIN 2 with Load = 75 Ω on PIN 2 Junction Temperature Storage Temperature Minimum DC Load Resistor PIN 6 Minimum DC Load Resistor PIN 2 2014A-02.TBL Symbol VCC Toper ELECTRICAL CHARACTERISTICS Tamb = + 25 °C, VCC = 9 V (unless otherwise specified) Symbol VCC ICC ICC Ptot Parameter Supply Voltage Range Supply Current (no load on Pin 2 and Pin 6) Supply Current (with 75 Ω Pin 2.1, with 600 Ω between Pin 6.1) Total Power Dissipation with Load Min. 8 – – – Typ. – – 45 400 Max. 14 20 – – Unit V mA mA mW – 50 6 – 50 – – 25 – – 4.5 – 40 2 – Vpp kΩ µA Vpp kΩ 4 – 1.7 6 6 +5 –1 – – 2 – – +6 – 0.5 – 25 2.4 – – +7 0 Vpp Ω V MHz MHz dB dB 2.2 – 1.7 6 – 1.8 – 10 2 – –1 – – 2.4 – – 0.4 Vpp Ω V MHz dB 0 7 10 – – – 3 VCC – V V kΩ INPUTS (pin 8 and pin 3) – – – – – Internal Video Input Swing from Picture IF (positive Video) Internal Video Input Impedance (positive video) Internal Video Input Bias Current (positive video) External Video Input Swing (positive video) External Video Input Impedance (positive video) SWITCHED OUTPUT (pin 6) - R LOAD = 600 Ω – – – – – – – Video Output Swing Video Output Dynamic Impedance Video DC Output Voltage (sync. pulse level note 1) Video Bandwith Pin 6 – from Internal Input Pin 3 (– 1 dB) Video Bandwith Pin 6 – from External Input Pin 8 (– 3 dB) Output Gain Pin 6 – Pin 8 Output Gain Pin 6 – Pin 3 EXTERNAL OUTPUT (pin 2) - RLOAD = 75 Ω – – – – – Video Output Swing Video Output Dynamic Impedance Video DC Output Voltage (sync. pulse level , note) Video Bandwidth (– 1dB) Video Output Gain (pin 2 – pin 3) – – – Switching Input Unactive Low Level or Unconnected Pin (TV receiving) Switching Input Active Level (ext. receiving) Switching Input Impedance Note : Use a video signal with a synchro pulse in order to make the clamp work in a correct way. (75Ω to the ground and 10µF in series). 2/4 2014A-03.TBL SWITCHING INPUT (pin 5) TEA2014A ELECTRICAL CHARACTERISTICS (continued) Tamb = + 25 °C, VCC = 9 V (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit – – 50 – 50 – – – dB dB – – – 40 2 2 5 50 – – – – % % % dB – – – Video rejection Between Two Inputs 1MHz 1kHz Linearity Distortion Luma (test line 17) Chroma (test line 331) Intermodulation Luma – Chroma (test line 331) Supply Voltage Rejection (1 kHz) 2014A-04.TBL OTHER DYNAMIC FEATURES TYPICAL APPLICATION VCC O or no connected = Video TV Switching Input 7V = External Video 7 5 10kΩ G=2 External Video Input 8 Reference (low impedance) Video 2Vpp 6 Video coming from TV 2Vpp 3 600Ω 2mA G=1 TEA2014A 2 Video 1Vpp 75Ω 2014A-02.EPS 75Ω 1 We advice to protect the 75 Ω output through a 75 Ω resistor for supply voltage higher than 9 V. 3/4 TEA2014A PM-DIP8.EPS PACKAGE MECHANICAL DATA 8 PINS – PLASTIC DIP A a1 B b b1 D E e e3 e4 F I L Z Min. Millimeters Typ. 3.32 0.51 1.15 0.356 0.204 Max. 1.65 0.55 0.304 10.92 9.75 7.95 Min. 0.020 0.045 0.014 0.008 Max. 0.065 0.022 0.012 0.430 0.384 0.313 2.54 7.62 7.62 3.18 Inches Typ. 0.131 0.100 0.300 0.300 6.6 5.08 3.81 1.52 0.125 0260 0.200 0.150 0.060 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No licence is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without noti ce. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics. 1996 SGS-THOMSON Microelectronics - All Rights Reserved Purchase of I2C Components of SGS-THOMSON Microelectronics, conveys a license under the Philips I2C Patent. Rights to use these components in a I2C system, is granted provided that the system confo rms to the I2C Standard Specifications as defined by Philips. SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 4/4 DIP8.TBL Dimensions