STMICROELECTRONICS TSM107ID

TSM107
Triple Operational Amplifier and Voltage Reference
Operational Amplifier:
■
■
■
■
■
Medium bandwidth (unity gain): 0.9MHz
Large output voltage swing: 0V to
(VCC - 1.5V)
Input common mode voltage range
includes ground
Wide power supply range: 3.8 to 32V
±1.9 TO ±16V
1.5kV ESD Protection (HBM)
D
SO-8
(Plastic Micropackage)
Voltage Reference:
■
■
Fixed output voltage reference 0.83V
±1.6% Voltage precision including Vio
PIN CONNECTIONS (top view)
Description
The TSM107 is a monolithic IC that includes three
op-amp for which the non-inverting input is wired
to a 0.83V fixed voltage reference. This device
offers both space and cost savings in many
applications such as power supply management
or data acquisition systems..
1 Out1
0.8V
Vcc
8
+
2
Ve-
Out3
7
+
4
Out2
+
3
Ve-
Ve-
Gnd
6
5
Order Codes
Part Number
TSM107ID
TSM107IDT
December 2004
Temperature Range
-40°C, +105°C
Package
Packaging
Marking
SO
Tube
Tape & Reel
M107
Revision 1
1/5
TSM107
Absolute Maximum Ratings
1 Absolute Maximum Ratings
Table 1. Key parameters and their absolute maximum ratings
Symbol
Value
Unit
VCC
Supply Voltage
36
V
Vid
Differential Input Voltage
36
V
Vi
Negative Input Voltage
Toper
Tj
Rthja
Tl
ESD
2/5
Parameter
-0.3 to Vcc + 0.3V
V
-40 to +105
°C
Maximum Junction Temperature
150
°C
Thermal Resistance Junction to Ambient (SO package)
175
°C/W
Maximum Lead Temperature (10 seconds maximum)
260
°C
Electrostatic Discharge Protection
1.5
kV
Operating Free-air Temperature Range
Electrical Characteristics
TSM107
2 Electrical Characteristics
Table 2. General electrical characteristics
Symbol
ICC
Parameter
Min.
Total Supply Current
Vcc+ = 5V, no load
Tmin. < Tamb < Tmax.
Vcc+ = 30V, no load
Tmin. < Tamb < Tmax
Typ.
Max.
2.5
4.5
6
8.5
10
5.5
Unit
mA
Table 3. Electrical characteristics for operator/ VCC+ = +5V, VCC- = Ground, Tamb = 25°C
(unless otherwise specified)
Symbol
Vref + Vio
Iib
Isource
Io
Parameter
Input Offset Voltage
Tamb = 25°
Tmin. ≤ Tamb ≤ Tmax.
Input Bias Current
negative input
Output Current Source
Vo = 2V
VCC = +15V
Min.
Typ.
Max.
Unit
0.818
0.748
0.83
0.842
0.872
V
nA
20
20
Short Circuit to Ground
VCC = +15V
40
40
mA
60
mA
Isink
Output Current Sink
VCC = +15V, Vo = 2V
10
20
mA
VOH
High Level Output Voltage
VCC+ = 30V
Tamb = 25°C, RL = 10k
Tmin. ≤ Tamb ≤ Tmax.
27
27
28
V
VOL
Low Level Output Voltage
RL = 10k
Tmin. ≤ Tamb ≤ Tmax.
5
20
20
mV
3/5
TSM107
Package Mechanical Data
3 Package Mechanical Data
SO-8 MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
1.35
1.75
0.053
0.069
A1
0.10
0.25
0.04
0.010
A2
1.10
1.65
0.043
0.065
B
0.33
0.51
0.013
0.020
C
0.19
0.25
0.007
0.010
D
4.80
5.00
0.189
0.197
E
3.80
4.00
0.150
0.157
e
1.27
0.050
H
5.80
6.20
0.228
0.244
h
0.25
0.50
0.010
0.020
L
0.40
1.27
0.016
0.050
k
ddd
8˚ (max.)
0.1
0.04
0016023/C
4/5
Revision History
TSM107
4 Revision History
Date
Revision
01 Dec. 2004
1
Description of Changes
First Release
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
© 2004 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
5/5