Inductors NL Series NL3225 Type For General Applications SMD FEATURES • The NL series are available in 5 form factors ranging from 2016 to 5650. • Utilizing a miniaturized winding structure, these products provide high Q characteristics. • Inductance tolerance is ±5 percent. APPLICATIONS Personal computers, hard disk drives, and other electronic equipment. FLUX AND CLEANING Rosin-based flux is recommended. Cleaning Conditions Solvent Time Chlorine-based solvent (Do not use acid or alkali solvents.) 2min max. PRODUCT IDENTIFICATION NL 201614 (1) (2) T- 2 R 2 J (3) (4) (5) (1)Series name SPECIFICATIONS Operating temperature range –20 to +85°C Storage temperature range –40 to +85°C [Unit of products] RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING (2)Dimensions L×W×T 2.1×1.6×1.4mm 2.5×2.0×1.8mm 3.2×2.5×2.2mm 4.5×3.2×3.2mm 5.6×5.0×5.0mm 201614 252018 322522 453232 565050 10s max. 230°C 200°C Natural cooling (3)Packaging style T 150°C Taping (reel) 30s max. 100°C (4)Inductance value 1µH 33µH 1R0 330 Preheating: 120s Time (s) FLOW SOLDERING (5)Inductance tolerance 10s max. 260°C Natural cooling J K ±5% ±10% PACKAGING STYLE AND QUANTITIES 150°C Packaging style Taping 100°C Preheating: 120s Time (s) Type NL201614T NL252018T NL322522T NL453232T NL565050T Quantity 2000 pieces/reel 2000 pieces/reel 2000 pieces/reel 500 pieces/reel 400 pieces/reel IRON SOLDERING Perform soldering at 250°C on 30W max. within 5 seconds. VAPOR-PHASING 10s max. 220°C Natural cooling 215°C 150°C 30s max. 100°C Preheating: 120s Time (s) Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice. Inductors NL Series NL3225 Type For General Applications SMD SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Inductor Pattern 470J 2.5±0.2 0.5 2.2±0.2 2 3.2±0.2 Terminal electrode (0.4) 1 2 1 Dimensions in mm 1.9±0.1 Weight: 50mg ELECTRICAL CHARACTERISTICS Inductance (µH) Inductance tolerance Q min. Test frequency L, Q (MHz) 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±10, ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 15 17 19 21 23 23 25 25 26 26 27 27 28 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 100 100 100 100 100 100 100 100 100 100 100 100 100 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 Self-resonant frequency (MHz)min. 2500 2300 2100 1900 1700 1500 1400 1300 1200 1100 1000 900 700 500 450 400 350 320 300 250 220 180 160 140 120 100 85 80 75 70 60 55 50 45 40 35 30 20 DC resistance (Ω)max. 0.13 0.14 0.16 0.18 0.2 0.22 0.24 0.27 0.3 0.33 0.36 0.4 0.44 0.22 0.25 0.28 0.32 0.36 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.85 0.9 1 1.1 1.2 1.3 1.5 1.6 1.8 2 2.1 2.5 Rated current (mA)max. 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 400 390 370 350 320 290 260 250 220 200 180 170 150 140 ∗ X: Please specify the inductance tolerance, K(±10%) or J(±5%) • Inductance tolerance is only standard. • Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER (16085A+16093B+TDK TF-1) [L SRF: HP8753C NETWORK ANALYZER Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER 0.12µH] Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice. Part No. NL322522T-010X∗ NL322522T-012X NL322522T-015X NL322522T-018X NL322522T-022X NL322522T-027X NL322522T-033X NL322522T-039X NL322522T-047X NL322522T-056X NL322522T-068X NL322522T-082X NL322522T-R10X NL322522T-R12X NL322522T-R15X NL322522T-R18X NL322522T-R22X NL322522T-R27X NL322522T-R33X NL322522T-R39X NL322522T-R47X NL322522T-R56X NL322522T-R68X NL322522T-R82X NL322522T-1R0J NL322522T-1R2J NL322522T-1R5J NL322522T-1R8J NL322522T-2R2J NL322522T-2R7J NL322522T-3R3J NL322522T-3R9J NL322522T-4R7J NL322522T-5R6J NL322522T-6R8J NL322522T-8R2J NL322522T-100J NL322522T-120J Inductors NL Series NL3225 Type For General Applications SMD ELECTRICAL CHARACTERISTICS Inductance (µH) Inductance tolerance Q min. Test frequency L, Q (MHz) 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 30 30 30 30 30 30 30 30 30 30 20 20 20 20 20 20 20 20 20 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 Self-resonant frequency (MHz)min. 20 20 20 20 17 16 15 13 12 11 10 10 8 7 7 6 5 5 4 • Inductance tolerance is only standard. • Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER (16085A+16093B+TDK TF-1) [L SRF: HP8753C NETWORK ANALYZER Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER 2.8 3.3 3.7 5 5.6 6.4 7 8 9 10 10 11 15 17 21 28 34 42 40 INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS 1000 4194A IMPEDANCE/GAIN-PHASE 1000 ANALYZER Test circuit 500 DC 500 0.5 NL322522T-150J NL322522T-180J NL322522T-220J NL322522T-270J NL322522T-330J NL322522T-390J NL322522T-470J NL322522T-560J NL322522T-680J NL322522T-820J NL322522T-101J NL322522T-121J NL322522T-151J NL322522T-181J NL322522T-221J NL322522T-271J NL322522T-331J NL322522T-391J NL322522T-471J 100µH 100 YHP model-4255A or equivalent 220µH 220µH L=5H C=20000µF A Specimen Universal bridge Test equipment: RF IMPEDANCE ANALYZER 4191A, YHP Part No. 0.12µH] TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS 1 Rated current (mA)max. 130 120 110 80 70 65 60 55 50 45 40 70 65 60 50 45 40 35 25 DC resistance (Ω)max. 100µH 100 0.1µH 0.1 0.068µH 0.047µH 0.05 0.033µH Inductance (µH) Inductance (µH) Inductance (µH) 82µH 50 10µH 10 50 47µH 18µH 12µH 10 8.2µH 5 5 0.022µH 0.015µH 1µH 1 0.01 0.05 1.5µH 0.01µH 1 0.5 0.5 1 5 10 50 100 Frequency (MHz) 500 1000 0.2 0.5 0.1 0.5 1 5 Frequency (MHz) 10 40 5 10 50 100 DC current (mA) Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice. 500 1000 Inductors NL Series NL3225 Type For General Applications SMD TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 1000 INDUCTANCE CHANGE vs. TEMPERATURE CHARACTERISTICS ∆L /L 20°C(%) Impedance (Ω) Test equipment: 500 RF IMPEDANCE ANALYZER 4191A, YHP 0.1µH 0.047µH 100 0.022µH 0.01µH 50 –40 –20 100µH 3.3µH 5 0 8.2µH 8.2µH 33µH 100µH 80 20 40 60 Temperature(°C) –5 10 Test equipment: LCR model-4275A, YHP at 10kHz 1Vrms 5 0.5 1 5 10 50 100 Frequency (MHz) 500 1000 Q vs. FREQUENCY CHARACTERISTICS 1000 4194A IMPEDANCE/GAIN-PHASE 100k ANALYZER 220µH 50k Test equipment: 500 RF IMPEDANCE ANALYZER 4191A, YHP 100µH 100 50 Q 10k 0.1µH 0.047µH Impedance (Ω) 5k 10 0.022µH 0.01µH 5 10µH 1k 0.5 1 5 10 50 100 Frequency (MHz) 500 1µH 100 100 500 1000 Test equipment:Q meter model-4343B, YHP 80 50 33µH 68µH 100µH Q 60 0.1 0.5 1 5 Frequency (MHz) 10 40 40 10µH 4.7µH 2.2µH 220µH 20 0 0.05 0.1 0.5 1 5 Frequency (MHz) 10 511_NL3225 980330 Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice.