TOSHIBA TLP541G

TLP541G, TLP542G
TOSHIBA Photocoupler GaAs Ired & Photo-Thyristor
TLP541G,TLP542G
Programmable Controllers
AC−Output Module
Solid State Relay
Unit in mm
The TOSHIBA TLP541G consists of a photo−thyristor optically coupled
to a gallium arsenide infrared emitting diode in a six lead plastic DIP
package.
The TOSHIBA TLP542G consists of a photo−thyristor optically coupled
to a gallium arsenide infrared emitting diode in a seven lead plastic DIP
package.
·
Peak off-state voltage: 400 V (min.)
·
Trigger LED current: 7 mA (max.)
·
On-state current: 150 mA (max.)
·
Isolation voltage: 2500 Vrms (min.)
·
UL recognized: UL1577, file no. E67349
Pin Configuration (top view)
TOSHIBA
11−7A8
Weight: 0.4 g
TOSHIBA
11−10C5
Weight: 0.53 g
1
2002-09-25
TLP541G, TLP542G
Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
IF
70
mA
∆IF / °C
-0.7
mA / °C
Peak forward current (100 µs pulse, 100 pps)
IFP
1
A
Reverse voltage
VR
5
V
Junction temperature
Tj
125
°C
Peak forward voltage (RGK = 27kΩ)
VDRM
400
V
Peak reverse voltage (RGK = 27kΩ)
VRRM
400
V
On-state current
IT (RMS)
150
mA
On-state current derating (Ta ≥ 25°C)
∆IT / °C
-2.0
mA / °C
Peak one cycle surge current
ITSM
2
A
Peak reverse gate voltage
VGM
-5
V
Tj
100
°C
Forward current
Detector
LED
Forward current derating (Ta ≥ 25°C)
Junction temperature
Storage temperature range
Tstg
-55~125
°C
Operating temperature range
Topr
-30~100
°C
Lead soldering temperature (10 s)
Tsol
260
°C
BVS
2500
Vrms
Isolation voltage (AC, 1 min., R.H. ≤ 60%)
(Note)
(Note)
Device considered a two terminal device: LED side pins shorted together and detector side pins shorted
together.
Recommended Operating Conditions
Characteristic
Symbol
Min.
Typ.
Max.
Unit
Supply voltage
VAC
―
―
120
Vac
Forward current
IF
10
16
25
mA
Operating temperature
Topr
-30
―
85
°C
Gate to cathode resistance
RGK
―
27
33
kΩ
Gate to cathode capacity
CGK
―
0.01
0.1
µF
2
2002-09-25
TLP541G, TLP542G
Individual Electrical Characteristics (Ta = 25°C)
Detector
LED
Characteristic
Symbol
Test Condition
Min.
Typ.
Max.
Unit
Forward voltage
VF
IF = 10 mA
1.0
1.15
1.3
V
Reverse current
IR
VR = 5 V
―
―
10
µA
Capacitance
CT
V = 0, f = 1 MHz
―
30
―
pF
Off-state current
IDRM
VAK = 400 V
RGK = 27 kΩ
Ta = 25°C
―
10
5000
nA
Ta = 100°C
―
1
100
µA
Reverse current
IRRM
VKA = 400 V
RGK = 27 kΩ
Ta = 25°C
―
10
5000
nA
Ta = 100°C
―
1
100
µA
On-state voltage
VTM
ITM = 100 mA
―
0.9
1.3
V
Holding current
IH
RGK = 27 kΩ
―
0.2
1
mA
Off-state dv/dt
dv/dt
VAK = 280 V, RGK = 27 kΩ
5
10
―
V/µs
V = 0, f = 1 MHz
Anode to gate
―
20
―
Gate to cathode
―
350
―
Min.
Typ.
Max.
Unit
Capacitance
Cj
pF
Coupled Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Trigger LED current
IFT
VAK = 6 V, RGK = 27 kΩ
1
4
7
mA
Turn-on time
ton
IF = 50 mA, RGK = 27 kΩ
―
10
―
µs
Capacitance
(input to output)
CS
VS = 0, f = 1 MHz
―
0.8
―
pF
Isolation resistance
RS
VS = 500 V, R.H. ≤ 60%
―
1011
―
Ω
2500
―
―
Vrms
Isolation voltage
BVS
AC, 1 minute
3
2002-09-25
TLP541G, TLP542G
4
2002-09-25
TLP541G, TLP542G
5
2002-09-25
TLP541G, TLP542G
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
6
2002-09-25