TLP296G TOSHIBA Photocoupler Photo Relay TLP296G Telecommunication Data Acquisition Measurement Instrumentation Unit in mm The TOSHIBA TLP296G consists of gallium arsenide infrared emitting diode optically coupled to a photo−MOS FET in a 8 lead DIP package (DIP8). The TLP296G is a bi−directional switch which can replace mechanical relay in many applications. · 8 pin DIP (DIP8), 2 channel type (2−form−A) · Peak off−state voltage: 400 V (min.) · Trigger LED current: 5 mA (max.) · On−state current: 100 mA (max.) · On−state resistance: 30 Ω (max.) · Isolation voltage: 2500 Vrms (min.) · Trigger LED current (Ta = 25°C) TOSHIBA Weight: 0.54 g Trigger LED Current (mA) Classification 11−10C4 @ION = 100 mA Marking Of Classification Min. Max. (IFT2) ― 2 T2 Standard ― 5 T2, blank Pin Configuration (top view) (*): Ex. Rank IFT2: TLP296G (IFT2) 1 2002-09-25 TLP296G Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit IF 50 mA ∆IF / °C -0.5 mA / °C Peak forward current (100 µs pulse, 100 pps) IFP 1 A Reverse voltage VR 5 V Junction temperature Tj 125 °C VOFF 400 V Forward current LED Forward current derating (Ta ≥ 25°C) Detector Off-state output terminal voltage On-state current On-state current derating (Ta ≥ 25°C) Both channel Note 1 One channel Both channel 100 ION Note 1 120 -1.0 ∆ION / °C One channel Junction temperature -1.2 mA mA / °C Tj 125 °C Storage temperature range Tstg -55~125 °C Operating temperature range Topr -20~85 °C Lead soldering temperature (10 s) Tsol 260 °C BVS 2500 Vrms Isolation voltage (AC, 1 min., R.H.≤ 60%) Note 2 (Note 1): Two channels operationg simultaneously. (Note 2): Device considered a two-terminal device: Pins 1, 2, 3and 4 shorted together and pins 5, 6, 7and 8 shorted together. Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Supply voltage VDD ― ― 320 V Forward current IF 7.5 15 25 mA On-state current ION ― ― 100 mA Operating temperature Topr -20 ― 80 °C 2 2002-09-25 TLP296G Individual Electrical Characteristics (Ta = 25°C) Detector LED Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V ― ― 10 µA Capacitance CT V = 0, f = 1 MHz ― 30 ― pF Off-state current IOFF VOFF = 400 V ― ― 1 µA Capacitance COFF V = 0, f = 1 MHz ― ― ― pF Min. Typ Max. Unit ION = 100 mA ― 2 5 mA ION = 100 mA, IF = 10 mA ― 20 30 Ω Min. Typ. Max. Unit 0.8 ― pF Ω Coupled Electrical Characteristics (Ta = 25°C) Characteristic Symbol Trigger LED current IFT On-state resistance RON Test Condition Isolation Characteristics (Ta = 25°C) Characteristic Symbol Capacitance input to output CS Isolation resistance RS Test Condition VS = 0, f = 1 MHz ― 10 VS = 500 V, R.H.≤ 60% 5 ´ 10 10 ― 2500 ― ― AC, 1 second (in oil) ― 5000 ― DC, 1 minute (in oil) ― 5000 ― Vdc Min. Typ. Max. Unit ― ― 4 ― ― 4 AC, 1 minute Isolation voltage BVS 14 Vrms Switching Characteristics (Ta = 25°C) Characteristic Symbol Turn-on time tON Turn-off time tOFF Test Condition RL = 200 Ω VDD = 20 V, IF = 10 mA (Note 1) ms (Note 1): Switching time test circuit 3 2002-09-25 TLP296G 4 2002-09-25 TLP296G 5 2002-09-25 TLP296G RESTRICTIONS ON PRODUCT USE 000707EBC · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 6 2002-09-25