TSC DBL157G

DBL151G THRU DBL159G
Single Phase 1.5 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range
50 to 1400 Volts
Current
1.5 Amperes
DBL
.315(8.0)
.285(7.24)
.255(6.5)
.245(6.2)
Features
aUL Recognized File # E-96005
aGlass passivated junction
aIdeal for printed circuit board
aReliable low cost construction utilizing
.335(8.51)
.320(8.12)
.102(2.60)
.094(2.40)
.08(2.03)
.05(1.27)
.045(1.14)
.035(0.89)
.023(0.58)
.018(0.46)
.185(4.69)
.150(3.81)
.205(5.2)
.195(5.0)
.075(1.90)
.055(1.39)
.350(8.9)
.300(7.6)
.013(0.33)
.0088(0.22)
DBLS
molded plastic technique
aHigh surge current capability
aHigh temperature soldering guaranteed:
260 / 10 seconds at 5 lbs., ( 2.3 kg )
tension
aSmall size, simple installation
aLeads solderable per MIL-STD-202
Method 208
.047(1.20)
.040(1.02)
.205(5.2)
.195(5.0)
.404(10.3)
.386(9.80)
.255(6.5)
.245(6.2)
.335(8.51)
.320(8.13) 45 0
.013(0.33)
.0088(0.22)
.102(2.60)
.094(2.40)
.060(1.53)
.040(1.02)
.013(0.33)
.003(0.076)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
DBL DBL DBL DBL DBL DBL DBL DBL DBL
151G 152G 153G 154G 155G 156G 157G 158G 159G
Units
DBLS DBLS DBLS DBLS DBLS DBLS DBLS DBLS DBLS
151G 152G 153G 154G 155G 156G 157G 158G 159G
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
@TA = 40
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.5A
Maximum DC Reverse Current @ TA=25
at Rated DC Blocking Voltage @ TA=125
Typical Thermal Resistance (Note) RÛJA
RÛJL
Operating Temperature Range TJ
Storage Temperature Range TSTG
50
35
50
100 200 400 600 800 1000 1200 1400
70 140 280 420 560 700 840 980
100 200 400 600 800 1000 1200 1400
V
V
V
1.5
A
50
A
1.1
1.25
10
500
40
15
-55 to +150
-55 to +150
Note: Thermal resistance from Junction to Ambient and from Junction to Lead Mounted on
P.C.B. with 0.51 x 0.51” (13 x 13mm) Copper Pads.
V
uA
uA
/w
RATINGS AND CHARACTERISTIC CURVES (DBL151G THRU DBL159G)
FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT PER BRIDGE ELEMENT
PEAK FORWARD SURGE CURRENT. (A)
AVERAGE FORWARD CURRENT. (A)
1.5
FIG.1- MAXIMUM DERATING CURVE FOR OUTPUT
RECTIFIED CURRENT
.06" (1.5mm)
PCB
Copper Pauls
.51" x .51"
(13mm x 13mm)
0.75
60Hz RESISTIVE OR
INDUCTIVE LOAD
0
20
40
60
80
100
120
60
Tj=25 0C
40
30
20
10
0
140 150
Single Sine - Wave
(JEDEC Method)
50
1
2
o
AMBIENT TEMPERATURE. ( C)
4
6
10
20
40
NUMBER OF CYCLES AT 60Hz
FIG.3- TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
FIG.4- TYPICAL FORWARD CHARACTERISTICS
PER BRIDGE ELEMENT
10
100
INSTANTANEOUS FORWARD CURRENT. (A)
INSTANTANEOUS REVERSE CURRENT. ( A)
Tj=125 0C
10
1.0
Tj=25 0C
.10
.01
0
20
40
60
80
100
120
FIG.5- TYPICAL JUNCTION CAPACITANCE PER
BRIDGE ELEMENT
CAPACITANCE.(pF)
100
1
1.0
Tj=25 0C
f=1.0MHz
Vsig=50mVp-p
10
0.1
0
Tj=25 C
PULSE WIDTH-300 S
2% DUTY CYCLE
.01
140
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
10
1
100
REVERSE VOLTAGE. (V)
- 481-
0.4
0.6
0.8
1.0
FORWARD VOLTAGE. (V)
1.2
1.4
60
100