SB 15, 25, 35 SERIES High Current 15, 25, 35 AMPS. Single Phase Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 15.0/25.0/35.0 Amperes SB35 Features DIA .193(4.9) HOLE FOR #8 SCREW UL Recognized File # E-96005 Glass passivated junction Metal case with an electrically isolated SB35-W 1.14(29.0) 1.01(25.7) 1.14(29.0) 1.01(25.7) DIA .193(4.9) HOLE FOR #8 SCREW .692(17.6) .612(15.5) .752(19.1) .672(17.1) AC .692(17.6) .612(15.5) 1.14(29.0) 1.01(25.7) 1.14(29.0) 1.01(25.7) .602(15.3) .522(13.3) .752(19.1) .672(17.1) .752(19.1) .672(17.1) epoxy Rating to 1,000V PRV. High efficiency Mounting: thru hole for #8 screw High temperature soldering guaranteed: 260℃ / 10 seconds at 5 lbs., ( 2.3 kg ) tension Leads solderable per MIL-STD-202 Method 208 Isolated voltage from case to lead over 2000 volts .490(12.4) .410(10.4) .25(6.35) .040(1.0) DIA TYP 1.2(30.5) MIN. .93(23.5) .81(20.5) .442(11.23) .432(10.97) .442(11.23) .432(10.97) SB35-M 1.14(29.0) 1.01(25.7) DIA .193(4.9) HOLE FOR #8 SCREW 1.14(29.0) 1.01(25.7) .692(17.6) .612(15.5) .692(17.6) .612(15.5) .692(17.6) .612(15.5) .692(17.6) .612(15.5) .034(0.86) .030(0.76) .25(6.35) .93(23.5) .81(20.5) .442(11.23) .432(10.97) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol -05 Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage VRRM VRMS VDC Maximum Average Forward Rectified Current @TC= 55℃ SB15 SB25 SB35 I(AV) Peak Forward Surge Current, Single Sine-wave Superimposed on Rated Load (JEDEC method ) SB15 SB25 SB35 IFSM Maximum Instantaneous Forward SB15 7.5A SB25 12.5A Voltage Drop Per Element SB35 17.5A at Specified Current Maximum DC Reverse Current at Rated DC Blocking Voltage Per Element Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range 50 35 50 -1 -2 -4 -6 -8 -10 Units 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V 15.0 25.0 35.0 200 300 400 VF A A 1.1 V IR 10 uA RθJC 2.0 - 50 to + 125 / -50 to +150 ℃/W ℃ TJ ,TSTG Notes: 1. Thermal Resistance from Junction to Case. 2. Suffix “W” - Wire Lead Structure/”M” - Terminal Location Face to Face. - 614 - SB1505 SB1510 RATINGS AND CHARACTERISTIC CURVES (SB2505 THRU SB2510) SB3505 SB3510 FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT. (A) 40 AVERAGE FORWARD CURRENT. (A) 35 SB35 30 25 SB25 20 400 FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 300 200 SB3 100 5 SB2 5 SB 15 15 20 SB15 1 1.5 10 2 3 4 5 6 7 8 9 10 15 20 25 30 40 NUMBER OF CYCLES AT 60Hz 5 0 20 40 60 80 100 120 140 160 180 o CASE TEMPERATURE. ( C) 10 Tj=25 0C 1.0 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 100 25 SB 15 SB 10 1.0 0.1 .6 140 - 615 - 35 Tj=100 0C 0.1 1000 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) 100 FIG.4- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT SB FIG.3- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT .8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE. (V) 1.8 2.0 60 80 100