SKL22A THRU SKLL24A 2.0 AMPS. Surface Mount Schottky Barrier Rectifiers Voltage Range 20 to 40 Volts Current 2.0 Amperes SMA/DO-214AC Features .062(1.58) .050(1.27) For surface mounted application Metal to silicon rectifier, majority carrier conduction Low forward voltage drop Easy pick and place High surge current capability Plastic material used carriers Underwriters Laboratory Classification 94V-0 Epitaxial construction High temperature soldering: 260oC / 10 seconds at terminals .111(2.83) .090(2.29) .187(4.75) .160(4.06) .091(2.30) .078(1.99) Mechanical Data Case: Molded plastic Terminals: Solder plated Polarity: Indicated by cathode band Packaging: 12mm tape per EIA STD RS-481 Weight: 0.063gram .012(.31) .006(.15) .008(.20) .004(.10) .056(1.41) .035(0.90) .210(5.33) .195(4.95) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol SKL22A SKLL22A SKL24A SKLL24A Units Type Number Marking Code Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL(See Fig. 1) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 2.0A Maximum DC Reverse Current @ TA =25℃ at Rated DC Blocking Voltage @ TA =80℃ VRRM VRMS VDC SL22A 20 14 20 SLL22A 20 14 20 SL24A 40 28 40 SLL24A 40 28 40 V V V I(AV) 2.0 A IFSM 60 A VF 0.38 0.34 0.40 1.0 40 Operating Temperature Range TJ -25 to +125 Storage Temperature Range TSTG -50 to +125 Notes: 1. Measured on P.C.Board with 0.2 x 0.2” (5 x 5mm) Copper Pad Areas. IR - 78 - 0.36 V mA mA ℃ ℃ RATINGS AND CHARACTERISTIC CURVES (SKL22A THRU SKLL24A) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 75 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) FIG.1- TYPICAL FORWARD CURRENT DERATING CURVE 2.4 2.0 1.6 1.2 0.8 0.4 45 Tj=25 0C 30 15 0 0 20 40 60 80 100 120 140 160 180 8.3ms Single Half Sine Wave JEDEC Method 60 200 1 5 o 10 50 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE. ( C) FIG.4- TYPICAL REVERSE CHARACTERISTICS FIG.3- TYPICAL JUNCTION CAPACITANCE 100 700 500 400 SK 300 SKL 200 LL 22 22A A-S KL -SK L2 L24 4A A 100 0 0.01 0.05 0.1 0.5 1 5 10 50 100 REVERSE VOLTAGE. (V) REVERSE LEAKAGE CURRENT. (mA) JUNCTION CAPACITANCE.(pF) 600 10 1.0 Tj=75 0C 0.1 Tj=25 0C 0.01 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) - 79 - 140 100 RATINGS AND CHARACTERISTIC CURVES (SKL22A THRU SKLL24A) FIG.6- TYPICAL FORWARD CHARACTERISTICS (FOR SKLL22A) 100 200 300 400 FORWARD VOLTAGE. (MILLIVOLTS) 500 1E+03 1E+00 1E-01 0 600 0 100 500 600 - 80 - 1E+03 Tj=100 0C Tj=25 0C 1E+00 200 300 400 FORWARD VOLTAGE. (MILLIVOLTS) 600 1E+02 MILLIAMPERES REVERSE CURRENT. (mA) 1E+01 1E+02 Tj=25 0C 100 500 1E+01 1E+03 Tj=100 0C 0 200 300 400 FORWARD VOLTAGE. (MILLIVOLTS) FIG.8- TYPICAL FORWARD CHARACTERISTICS (FOR SKLL24A) 1E+00 MILLIAMPERES REVERSE CURRENT. (mA) FIG.7- TYPICAL FORWARD CHARACTERISTICS (FOR SKL24A) 1E-01 Tj=25 0C 1E+02 MILLIAMPERES REVERSE CURRENT. (mA) 1E+01 1E+02 Tj=25 0C 1E+01 1E+03 Tj=100 0C Tj=100 0C 1E+00 MILLIAMPERES REVERSE CURRENT. (mA) FIG.5- TYPICAL FORWARD CHARACTERISTICS (FOR SKL22A) 0 100 200 300 400 FORWARD VOLTAGE. (MILLIVOLTS) 500 600