1513 data 3 delay devices, inc. FIXED SIP DELAY LINE TD/TR = 5 (SERIES 1513) FEATURES • • • • • • PACKAGES Fast rise time for high frequency applications Very narrow device (SIP package) Stackable for PC board economy Low profile Epoxy encapsulated Meets or exceeds MIL-D-23859C 1513-xxz xx = Delay (TD) z = Impedance Code 1 2 6 7 GND IN OUT GND PIN DESCRIPTIONS FUNCTIONAL DESCRIPTION The 1513-series device is a fixed, single-input, single-output, passive IN Signal Input delay line. The signal input (IN) is reproduced at the output (OUT), shifted OUT Signal Output by a time (TD) given by the device dash number. The characteristic GND Ground impedance of the line is given by the letter code that follows the dash number (See Table). The rise time (TR) of the line is 20% of TD, and the 3dB bandwidth is given by 1.75 / TD . SERIES SPECIFICATIONS • • • • • Dielectric breakdown: Distortion @ output: Operating temperature: Storage temperature: Temperature coefficient: DASH NUMBER SPECIFICATIONS 50 Vdc 10% max. -55°C to +125°C -55°C to +125°C 100 PPM/°C IN OUT GND GND Functional Diagram 1 2 6 .210 MAX. 7 .810 MAX. .020 TYP. .020 TYP. .600 TYP. .100 TYP. .280 MAX. .100 MIN. .010 TYP. Package Dimensions Part Number 1513-2.5A 1513-5A 1513-10A 1513-15A 1513-20A 1513-25A 1513-30A 1513-40A 1513-50A 1513-60A 1513-80A 1513-100A 1513-3.5Y 1513-7.5Y 1513-15Y 1513-22.5Y 1513-30Y 1513-37.5Y 1513-45Y 1513-60Y 1513-75Y 1513-90Y 1513-105Y 1513-120Y 1513-135Y 1513-150Y 1513-5B 1513-10B 1513-20B 1513-30B 1513-40B 1513-50B 1513-60B 1513-80B 1513-100B 1513-120B 1513-140B 1513-150B 1997 Data Delay Devices Doc #97022 2/5/97 DATA DELAY DEVICES, INC. 3 Mt. Prospect Ave. Clifton, NJ 07013 Delay (ns) 2.5 ± 1.0 5.0 ± 1.0 10.0 ± 1.0 15.0 ± 1.0 20.0 ± 1.0 25.0 ± 1.3 30.0 ± 1.5 40.0 ± 2.0 50.0 ± 2.5 60.0 ± 3.0 80.0 ± 4.0 100 ± 5.0 3.5 ± 1.0 7.5 ± 1.0 15.0 ± 1.0 22.5 ± 1.2 30.0 ± 1.5 37.5 ± 1.9 45.0 ± 2.3 60.0 ± 3.0 75.0 ± 3.8 90.0 ± 4.5 105 ± 5.3 120 ± 6.0 135 ± 6.8 150 ± 7.5 5.0 ± 1.0 10.0 ± 1.0 20.0 ± 1.0 30.0 ± 1.5 40.0 ± 2.0 50.0 ± 2.5 60.0 ± 3.0 80.0 ± 4.0 100 ± 5.0 120 ± 6.0 140 ± 7.0 150 ± 7.5 Rise Time (ns) 1.0 1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 1.0 1.5 3.0 4.5 6.0 7.5 9.0 12.0 15.0 18.0 21.0 24.0 27.0 30.0 1.0 2.0 4.0 6.0 8.0 10.0 12.0 16.0 20.0 24.0 28.0 30.0 Impedance (Ω Ω) 50 50 50 50 50 50 50 50 50 50 50 50 75 75 75 75 75 75 75 75 75 75 75 75 75 75 100 100 100 100 100 100 100 100 100 100 100 100 1 1513 PASSIVE DELAY LINE TEST SPECIFICATIONS TEST CONDITIONS INPUT: Ambient Temperature: Input Pulse: OUTPUT: Rload: Cload: Threshold: 25oC ± 3oC High = 3.0V typical Low = 0.0V typical Source Impedance: 50Ω Max. Rise/Fall Time: 3.0 ns Max. (measured at 10% and 90% levels) Pulse Width (TD <= 75ns): PWIN = 100ns Period (TD <= 75ns): PERIN = 1000ns Pulse Width (TD > 75ns): PWIN = 2 x TD Period (TD > 75ns): PERIN = 10 x TD 10MΩ 10pf 50% (Rising & Falling) NOTE: The above conditions are for test only and do not in any way restrict the operation of the device. PERIN PWIN TRISE INPUT SIGNAL TFALL VIH 90% 50% 10% 90% 50% 10% TRISE VIL TFALL TRISE OUTPUT SIGNAL 90% 50% 10% TFALL VOH 90% 50% 10% VOL Timing Diagram For Testing OUT PULSE GENERATOR RIN IN DEVICE UNDER TEST (DUT) IN OUT TRIG TRIG 50 Ω RIN = ROUT = ZLINE OSCILLOSCOPE ROUT Test Setup Doc #97022 2/5/97 DATA DELAY DEVICES, INC. Tel: 973-773-2299 Fax: 973-773-9672 http://www.datadelay.com 2