1519 10-TAP DIP DELAY LINE TD/TR = 5 (SERIES 1519) FEATURES PACKAGES 10 taps of equal delay increment Delays as large as 300ns available Low DC resistance Standard 16-pin DIP package Epoxy encapsulated Meets or exceeds MIL-D-23859C IN 1 16 N/C T2 2 15 T1 T4 3 14 T3 T6 4 13 T5 T8 5 12 T7 T10 6 11 T9 N/C 7 10 N/C GND 8 9 N/C FUNCTIONAL DESCRIPTION PIN DESCRIPTIONS The 1519-series device is a fixed, single-input, ten-output, passive delay line. The signal input (IN) is reproduced at the outputs (T1-T10) in equal increments. The delay from IN to T10 (TD) is given by the device dash number. The characteristic impedance of the line is given by the letter code that follows the dash number (See Table). The rise time (T R) of the line is 20% of TD, and the 3dB bandwidth is given by 1.75 / TD. SERIES SPECIFICATIONS Dielectric breakdown: Distortion @ output: Operating temperature: Storage temperature: Temperature coefficient: 1519-xxz xx = Delay (TD) z = Impedance Code IN Signal Input T1-T10 Tap Outputs GND Ground Functional Diagram T1 T2 T3 T4 T5 T6 T7 T8 T9 50 Vdc 10% max. -55C to +125C -55C to +125C 100 PPM/C IN T10 GND GND DASH NUMBER SPECIFICATIONS Part Number 1519-20A 1519-25A 1519-30A 1519-40A 1519-45A 1519-50A 1519-60A 1519-75A 1519-100A 1519-10B 1519-20B 1519-30B 1519-40B 1519-50B 1519-60B 1519-80B 1519-90B 1519-100B 1519-120B 1519-150B 1519-200B 1519-250B 1519-20C 1519-40C 1519-60C 1519-80C Delay (ns) 20 1.0 25 1.3 30 1.5 40 2.0 45 2.3 50 2.5 60 3.0 75 3.8 100 5.0 10 1.0 20 1.0 30 1.5 40 2.0 50 2.5 60 3.0 80 4.0 90 4.5 100 5.0 120 6.0 150 7.5 200 10.0 250 12.5 20 1.0 40 2.0 60 3.0 80 4.0 Imped () 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 RDC () 1.0 1.0 1.2 1.5 1.5 1.5 1.5 1.8 2.0 1.0 1.5 1.5 1.8 2.0 3.0 3.5 3.5 4.0 4.0 5.0 6.0 7.0 3.0 4.0 4.5 5.5 Part Number 1519-100C 1519-120C 1519-160C 1519-180C 1519-200C 1519-240C 1519-300C 1519-400C 1519-50D 1519-75D 1519-100D 1519-125D 1519-150D 1519-200D 1519-225D 1519-300D 1519-375D 1519-500D 1519-30E 1519-60E 1519-90E 1519-120E 1519-150E 1519-180E 1519-240E 1519-270E Delay (ns) 100 5.0 120 6.0 160 8.0 180 9.0 200 10.0 240 12.0 300 15.0 400 20.0 50 2.5 75 3.8 100 5.0 125 6.3 150 7.5 200 10.0 225 12.0 300 15.0 375 18.8 500 25.0 30 1.5 60 3.0 90 4.5 120 6.0 150 7.5 180 9.0 240 12.0 270 13.5 Imped () 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 300 300 300 300 300 300 300 300 RDC () 6.0 6.5 7.0 8.5 9.0 9.5 16.0 18.0 5.5 6.0 7.0 8.0 8.5 10.0 11.0 17.0 20.0 24.0 5.0 6.0 7.0 8.0 9.0 11.0 16.0 18.0 Part Number 1519-360E 1519-450E 1519-600E 1519-40F 1519-80F 1519-120F 1519-160F 1519-200F 1519-240F 1519-320F 1519-360F 1519-480F 1519-600F 1519-800F 1519-50G 1519-100G 1519-150G 1519-200G 1519-250G 1519-300G 1519-400G 1519-450G 1519-500G 1519-600G 1519-750G 1519-1000G Delay (ns) 360 18.0 450 22.5 600 30.0 40 2.0 80 4.0 120 6.0 160 8.0 200 10.0 240 12.0 320 16.0 360 18.0 480 24.0 600 30.0 800 40.0 50 2.5 100 5.0 150 7.5 200 10.0 250 12.5 300 15.0 400 20.0 450 22.5 500 25.0 600 30.0 750 37.5 1000 50 Imped () 300 300 300 400 400 400 400 400 400 400 400 400 400 400 500 500 500 500 500 500 500 500 500 500 500 500 RDC () 21.0 24.0 40.0 8.5 9.0 9.0 16.0 18.0 20.0 26.0 28.0 38.0 45.0 40.0 6.0 10.0 16.0 30.0 25.0 26.0 42.0 45.0 55.0 58.0 50.0 65.0 2013 Data Delay Devices Doc #01008 1/17/2013 DATA DELAY DEVICES, INC. 3 Mt. Prospect Ave. Clifton, NJ 07013 1 1519 PACKAGE DIMENSIONS 16 15 14 13 12 11 10 9 Lead Material: Nickel-Iron alloy 42 TIN PLATE *.320 MAX for delays larger than 500ns 1 2 3 4 5 6 7 8 .280 MAX. .900 MAX. .290 MAX.* .015 TYP. .010.002 .018 TYP. Doc #01008 1/17/2013 .070 MAX. .700.010 7 Equal spaces each .100.010 Non-Accumulative .350 MAX. DATA DELAY DEVICES, INC. Tel: 973-773-2299 Fax: 973-773-9672 http://www.datadelay.com 2 1519 PASSIVE DELAY LINE TEST SPECIFICATIONS TEST CONDITIONS INPUT: Ambient Temperature: Input Pulse: OUTPUT: Rload: Cload: Threshold: 25 C 3 C High = 3.0V typical Low = 0.0V typical Source Impedance: 50 Max. Rise/Fall Time: 3.0 ns Max. (measured at 10% and 90% levels) Pulse Width (TD <= 75ns): PW IN = 100ns Period (TD <= 75ns): PERIN = 1000ns Pulse Width (TD > 75ns): PW IN = 2 x TD Period (TD > 75ns): PERIN = 10 x TD o o 10M 10pf 50% (Rising & Falling) NOTE: The above conditions are for test only and do not in any way restrict the operation of the device. PERIN PW IN TRISE INPUT SIGNAL TFALL VIH 90% 50% 10% 90% 50% 10% DRISE VIL DFALL TRISE OUTPUT SIGNAL 90% 50% 10% TFALL VOH 90% 50% 10% VOL Timing Diagram For Testing OUT PULSE GENERATOR RIN IN TRIG 50 DEVICE UNDER TEST (DUT) IN T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 TRIG OSCILLOSCOPE ROUT RIN = ROUT = ZLINE Test Setup Doc #01008 1/17/2013 DATA DELAY DEVICES, INC. 3 Mt. Prospect Ave. Clifton, NJ 07013 3