AZ935 20 AMP MINIATURE DUAL AUTOMOTIVE RELAY – QUIET FEATURES • • • • • • • • • Extremely silent operation Up to 20 Amp switching capability in a compact size Sealed Two separate relays in one package Vibration and shock resistant ISO/TS 16949, ISO 14000 Tested in accordance with SAE J2544 Cost effective Designed for power windows, power seats and wiper applications CONTACTS GENERAL DATA Arrangement DPDT (2x1-Form C) Ratings Max. switched power: 280 W Max. switched voltage: 100 VDC Max. switched current (make/break), continuous: 2 Form C: 25A/20A, 20A Material Silver tin oxide (silver nickel available - contact factory) Resistance < 100 milliohms at 1A, 5 VDC COIL Power Life Expectancy Mechanical Electrical Minimum operations 1 x 107 operations 2 x 105 operations at 20 A 14 VDC Res. Operate Time (typical) 3 ms at nominal coil voltage Release Time (typical) 1.5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 500 Vrms coil to contact 500 Vrms between open contacts (at sea level for 1 min.) Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout > 8.3% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 155°C (311°F) Vibration 0.062" DA at 10–55Hz, 10 g at 55-200 Hz At Pickup Voltage (typical) 203 mW Max. Continuous Dissipation 1.9 W 20°C (68°F) ambient Shock 30 g, 11 ms, functional 32°C (58°F) nominal coil VDC Terminals Tinned copper alloy, P.C. 155°C (311°F) Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 10 grams Temperature Rise Max. Temperature NOTES 1. 2. 3. 4. All values at 20°C (68°F). Maximum make current refers to in-rush current of lamp load. Relay may pull in with less than “Must Operate” value. Specifications subject to change without notice. 7/27/06W AZ935 RELAY ORDERING DATA COIL SPECIFICATIONS - DC Coil Nominal Coil VDC 12 Must Operate VDC 7.2 Max. Continuous VDC 22.0 ORDER NUMBER Coil Resistance ±10% 255 2 Form C (SPDT) AZ935–2C–12DET MECHANICAL DATA Outline Dimensions PC Board Layout .906 [23.0] .886 [22.5] .148 [3.75] 3 x .148 [3.75] 10 x ø.051 [ø1.3] .084 [2.12] .226 [5.73] .148 [3.75] .665 [16.88] .827 [21.0] .010 [0.25] .738 [18.75] 10 x .138 [3.5] .122 [3.1] Viewed toward terminals 10 x .016 [0.4] Wiring Diagram 10 x .035 [0.9] 9 10 5 4 8 3 7 2 6 1 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± 0.010” 7/27/06W